Demonstration of a Quantum Controlled-NOT Gate in the Telecommunications Band

Jun Chen, Joseph B. Altepeter, Milja Medić, Kim Fook Lee, Burç Gökden, Robert H. Hadfield, Sae Woo Nam, Prem KumarPhysical 2008 · DOI · arXiv

Abstract

We present the first quantum controlled-not (cnot) gate realized using a fiber-based indistinguishable photon-pair source in the 1.55 microm telecommunications band. Using this free-space cnot gate, all four Bell states are produced and fully characterized by performing quantum-state tomography, demonstrating the gate's unambiguous entangling capability and high fidelity. Telecom-band operation makes this cnot gate particularly suitable for quantum-information-processing tasks that are at the interface of quantum communication and linear optical quantum computing.

Introduction

Building a scalable quantum network requires seamless integration between quantum information processing and long-distance transmission. While photons are ideal information carriers, the 1.55 µm wavelength is the industry standard for telecommunications due to its minimal loss in standard optical fibers. Historically, quantum logic gates like the controlled-NOT (CNOT) gate—the fundamental "if-then" operation for quantum computing—have been demonstrated primarily in the visible or near-infrared spectrum using nonlinear crystals. These systems often face significant challenges when coupling into single-mode fibers for long-distance networking.

This work addresses this gap by demonstrating the first CNOT gate operating natively in the 1.55 µm telecommunications band. By utilizing a fiber-native photon source, the researchers bridge the divide between quantum logic and existing global telecommunications infrastructure.

Experimental Methodology

The experimental architecture is divided into three functional stages: the photon source, the logic gate, and the detection system.

The Fiber-Based Quantum Splitter

The source generates indistinguishable photon pairs via Four-Wave Mixing (FWM) within a Sagnac loop containing 300 meters of dispersion-shifted fiber (DSF). This "quantum splitter" configuration relies on a time-reversed Hong-Ou-Mandel effect, where photon pairs are generated such that they are deterministically split into separate paths. To mitigate Raman scattering noise—a significant hurdle in fiber-based quantum optics—the fiber is cooled to 77K using liquid nitrogen.

Linear-Optical CNOT Gate

The CNOT gate is implemented using a free-space linear-optical design featuring three Partially Polarizing Beam Splitters (PPBS). These components are engineered to reflect vertical polarization entirely while reflecting only one-third of horizontal polarization. This configuration enables a probabilistic CNOT operation with a theoretical success rate of 1/9, notably without the requirement for additional "ancilla" photons.

Schematic of (a) the fiber-based quantum splitter source and (b) the linear-optical CNOT gate design.

Hybrid Detection Scheme

Detecting photons at telecom wavelengths requires high sensitivity. The setup employs a hybrid "heralding" scheme where a high-speed, low-noise Superconducting Single-Photon Detector (SSPD) triggers an InGaAs Avalanche Photodiode (APD), optimizing the signal-to-noise ratio for coincidence measurements.

Results and Characterization

The performance of the gate was evaluated through classical truth tables and quantum state tomography.

Logical Fidelity and Entanglement

The gate demonstrated a classical logical fidelity of approximately 87% across the four basis states ($|VV\rangle, |VH\rangle, |HV\rangle, |HH\rangle$). Beyond classical logic, the gate's ability to generate entanglement was verified by producing all four Bell states. Quantum state tomography was used to reconstruct the density matrices of these states, confirming the gate's entangling capabilities.

Experimental truth tables and fidelity metrics for the CNOT gate. Table (a) shows raw data while (b) shows data corrected for multi-pair production.

Error Analysis

A primary source of error was identified as "multiple-pair production," where the source occasionally generates four photons instead of two. When mathematically accounting for this noise, the "intrinsic" fidelity of the gate is estimated to be significantly higher: approximately 95% for the logical basis and 93% for entangled states.

Discussion and Conclusion

This demonstration marks a significant milestone in quantum networking. By operating at 1.55 µm, the CNOT gate is inherently compatible with existing fiber-optic networks.

While the current implementation is probabilistic and utilizes free-space components, it provides a clear path forward. Future iterations could move toward "on-demand" single-photon sources to eliminate multi-pair noise and integrate the entire optical circuit onto a photonic chip. Such advancements would enhance stability, reduce the physical footprint, and move the technology closer to practical deployment in global quantum communication systems.

Summary updated

Abstract

We present the first quantum controlled-not (cnot) gate realized using a fiber-based indistinguishable photon-pair source in the 1.55 microm telecommunications band. Using this free-space cnot gate, all four Bell states are produced and fully characterized by performing quantum-state tomography, demonstrating the gate's unambiguous entangling capability and high fidelity. Telecom-band operation makes this cnot gate particularly suitable for quantum-information-processing tasks that are at the interface of quantum communication and linear optical quantum computing.
BibTeX
@inproceedings{chen2008demonstration,
  author = {Jun Chen and Joseph B. Altepeter and Milja Medić and Kim Fook Lee and Burç Gökden and Robert H. Hadfield and Sae Woo Nam and Prem Kumar},
  title = {{Demonstration of a Quantum Controlled-NOT Gate in the Telecommunications Band}},
  booktitle = {Physical},
  year = {2008},
  doi = {10.1103/physrevlett.100.133603},
}
Figure