TL;DR
This paper introduces and numerically investigates a novel Vacuum-Air-Bag Preloading (VPA) method for improving the engineering properties of high-water-content river sediment. The VPA system significantly reduces inward horizontal displacement and increases effective stress, offering a promising approach for utilizing dredged materials in construction.
What Problem Does This Paper Address?
Dredged river sediment is a voluminous waste material characterized by high water content, low permeability, and poor strength, making it unsuitable for direct reuse as backfill. Conventional vacuum preloading is a common technique for dewatering and strengthening such soils, but it has limitations. The maximum achievable vacuum pressure is around 100 kPa, which can be insufficient for deep or very wet sediments. Furthermore, vacuum preloading can induce undesirable inward horizontal movement in the surrounding soil. This paper addresses the need for more effective methods to improve river sediment, specifically by exploring a combined vacuum and internal air-bag pressurization (VPA) technique to overcome the limitations of traditional vacuum preloading and enhance resource utilization of dredged materials.
Methods
The study employs a numerical approach using a 2D axisymmetric finite-element model developed in Abaqus 2021. The soil's behavior is simulated using the Modified Cam-Clay constitutive law, a standard model for simulating the consolidation of soft soils. The model incorporates prefabricated vertical drains (PVDs) to simulate drainage and applies a vacuum pressure of -80 kPa. The novel aspect is the inclusion of flexible air bags within the soil, which are pressurized to provide an additional positive stress. The researchers systematically analyzed the influence of key design parameters: air-bag pressure magnitude, pressurization timing, embedment depth of the air bags, and staged loading patterns. They compared the VPA method's performance against conventional vacuum preloading and vacuum-surcharge preloading.
Datasets
Not discussed in the paper. The study relies on numerical simulations based on the geotechnical properties of dredged soil retrieved from a construction site in Pudong New Area, Shanghai.
Key Insights and Ideas
- Internal pressure is key: The air-bag's ability to apply pressure internally within the soil mass is crucial. This generates lateral expansion that directly counteracts the inward contraction caused by vacuum preloading, leading to significantly reduced horizontal displacement.
- Timing matters: Applying air-bag pressure earlier in the treatment process (e.g., after 20 days) is more effective in controlling lateral deformation and accelerating strength gain. This is because the soil is still in a weaker state, making it more responsive to the internal pressure.
- Depth-dependent benefits: Deeper embedment of the air bags leads to greater reduction in lateral displacement, especially in deeper strata. Conversely, shallower embedment is more effective for controlling surface deformation.
- Staged pressurization is superior: A stepped approach, applying lower pressure in the upper air-bag segments and higher pressure in the lower segments, is more effective and cost-efficient than uniform pressure. This is attributed to the increasing lateral earth pressure with depth.
- VPA outperforms surcharge: Even with a lower pressure magnitude, the VPA method can reduce horizontal displacement more effectively than external surcharge preloading. This highlights the advantage of internal load application.
Key Results
- Under an -80 kPa vacuum, an additional 20 kPa air-bag pressure reduced inward horizontal displacement by over 20%.
- Effective stress increased linearly with air-bag pressure.
- Early pressurization (20 days) improved deformation control and strength gain.
- Deeper embedment (10 m) further reduced displacement and increased deep-layer effective stress.
- Staged pressurization (20 kPa upper, 40 kPa lower) reduced displacement by an additional 5–8% compared to uniform loading.
- Compared to 30 kPa surcharge preloading, VPA reduced horizontal displacement by 10–18% under equivalent total load.
- The hybrid vacuum-air-bag-surcharge scheme achieved the highest effective stress and minimal lateral deformation.
Limitations and Future Work
The authors acknowledge that the current model assumes axisymmetric conditions and idealized soil homogeneity. Future research should incorporate 3D effects, account for soil heterogeneity, and include field validation to further refine the understanding and application of the VPA method.
Summary updated