Deep Learning-Based Diffraction Identification and Uncertainty-Aware Adaptive Weighting for GNSS Positioning in Occluded Environments

Chenhui Wang, Huawei Shen, Yanyan Liu, Qingjia Meng, Chuang QianRemote 2026 · DOI

TL;DR

This paper introduces a novel deep learning approach using LSTMs to identify and mitigate diffraction errors in GNSS signals, a major challenge in urban and canyon environments. By fusing signal strength (SNR) with spatial information (elevation, azimuth) and incorporating uncertainty quantification, the method significantly boosts positioning accuracy and reliability, achieving near-perfect fix rates and substantial error reduction.

What Problem Does This Paper Address?

Global Navigation Satellite Systems (GNSS) are crucial for high-precision applications like deformation monitoring. However, in environments with obstructions like urban canyons or natural valleys, GNSS signals face severe interference. One such interference is signal diffraction, where signals bend around obstacles, creating a significant error source that is difficult to model and eliminate with traditional methods. This diffraction error can lead to positioning inaccuracies and gross errors, hindering reliable monitoring, especially in complex terrains where many critical infrastructure monitoring stations are located. Existing methods often struggle to effectively distinguish and mitigate these diffraction errors without compromising overall positioning performance.

Methods

The core of this research is a two-pronged approach:

  1. Deep Learning-Based Diffraction Identification: The authors employ a Long Short-Term Memory (LSTM) network, a type of recurrent neural network well-suited for time-series data. They investigate the impact of various input features:
  2. Azimuth: The horizontal angle of the satellite.
  3. Elevation: The vertical angle of the satellite.
  4. SNR (Signal-to-Noise Ratio): A measure of signal strength. They found that a multi-feature fusion of SNR + Elevation + Azimuth provided the optimal recognition accuracy for identifying diffraction-affected satellites. This combination effectively captures both signal strength and spatial geometric information.

  5. Uncertainty-Aware Adaptive Weighting: To further refine positioning and handle model uncertainty, they developed an adaptive weighting strategy. This method uses the probability outputs from the LSTM and quantifies the model's prediction uncertainty using Information Entropy. This allows the system to assign conservative weights to ambiguous signals, preventing erroneous down-weighting of potentially useful data when the model is less confident, thus improving overall stability and reliability.

Datasets

The experimental data was collected from a slope deformation monitoring system in an open-pit quarry in Guangdong Province, China. This area is characterized by complex terrain, dense vegetation, and mining facilities, representing a challenging high-occlusion environment. The data was sampled at 5-second intervals. For training and testing, the data was chronologically split, with the first 70% used for training and the remaining 30% for testing. No new benchmarks were introduced; rather, existing real-world GNSS data from a challenging environment was utilized.

Key Insights and Ideas

  • Feature Fusion is Key: Simply using individual features like azimuth or elevation is insufficient for accurate diffraction identification. Combining signal strength (SNR) with spatial geometry (elevation, azimuth) creates a powerful representation that significantly improves the model's ability to distinguish normal, ambiguous, and anomalous satellite signals.
  • Uncertainty Matters: Deep learning models, while powerful, can be uncertain, especially at decision boundaries. Quantifying this uncertainty with Information Entropy allows for a more robust weighting strategy, preventing the model from making overly aggressive decisions that could degrade positioning accuracy.
  • Beyond Binary Decisions: Traditional methods often use hard thresholds (e.g., cut-off elevation, SNR masks) that lead to binary decisions (keep or discard a satellite). This paper's adaptive weighting approach provides a continuous adjustment, offering a more nuanced and stable solution, especially in environments with limited visible satellites.
  • Diffraction is a Distinct Problem: The research highlights diffraction as a specific error source that requires dedicated identification and mitigation, distinct from general multipath or NLOS (Non-Line-of-Sight) issues.

Key Results

  • High Identification Accuracy: The multi-feature fusion (SNR + Elevation + Azimuth) achieved an overall recognition accuracy of 84.28% for identifying satellite anomaly states. Specifically, it achieved 85.58% for normal satellites, 70.84% for ambiguous satellites, and 88.01% for abnormal (diffracted) satellites.
  • Improved Positioning Reliability: The proposed method significantly improved the Ambiguity Fixing Rate (AFR) to 99.9%, compared to traditional methods which were around 98.0-98.5%.
  • Substantial Error Reduction: Positioning accuracy was enhanced by an average of 80.1% in the horizontal direction and 76.4% in the vertical direction. The vertical RMS error was reduced to 0.2920 m, a significant improvement over traditional methods (e.g., cut-off elevation at 1.1932 m).
  • Computational Efficiency: The method demonstrates negligible computational latency for real-time applications, with an average processing speed of 0.55 ms per sample.

Limitations and Future Work

  • Rover-Side Features Only: The current model relies solely on rover-station features. The authors acknowledge that incorporating homologous features from the reference station could theoretically expand the feature space. However, they deliberately chose to exclude them to ensure robust operation and continuous anomaly detection even if the communication link to the reference station is unstable. This suggests a potential avenue for future work to explore robust fusion of reference station data.
  • Model Interpretability: While the LSTM model is effective, further work could focus on enhancing the interpretability of the deep learning model's decisions.
  • Generalizability: While tested on a specific challenging environment, further validation across a wider range of high-occlusion scenarios would be beneficial to confirm its generalizability.

Summary updated

Abstract

In natural canyons and urban occluded environments, signal anomalies induced by the satellite diffraction effect are a critical error source affecting the positioning accuracy of deformation monitoring. This paper proposes a deep learning-based method for diffraction signal identification and mitigation. The method utilizes a LSTM network to deeply mine the time-series characteristics of GNSS observation data. We systematically analyze the impact of azimuth, elevation, SNR, and multi-feature combinations on model recognition performance, demonstrating that single features suffer from incomplete information or poor discrimination. Experimental results show that the multi-dimensional feature scheme of “SNR + Elevation + Azimuth” effectively characterizes both signal strength and spatial geometric information, achieving complementary feature advantages. The overall recognition accuracy of the proposed method reaches 84.2%, with an accuracy of 88.0% for anomalous satellites that severely impact positioning precision. Furthermore, we propose an Adaptive Weighting Method for Diffraction Mitigation Based on Uncertainty Quantification. This method constructs a variance inflation model using the probability vector output from the LSTM Softmax layer and introduces Information Entropy to quantify prediction uncertainty, ensuring that the weighting model possesses protection capability when the model fails or is uncertain. In processing a set of GNSS data collected in a highly-occluded environment, the proposed method significantly outperforms traditional cut-off elevation and SNR mask strategies, improving the AFR to 99.9%, and enhancing the positioning accuracy in the horizontal and vertical directions by an average of 80.1% and 76.4%, respectively, thereby effectively boosting the positioning accuracy and reliability in occluded environments.
BibTeX
@inproceedings{wang2026deep,
  author = {Chenhui Wang and Huawei Shen and Yanyan Liu and Qingjia Meng and Chuang Qian},
  title = {{Deep Learning-Based Diffraction Identification and Uncertainty-Aware Adaptive Weighting for GNSS Positioning in Occluded Environments}},
  booktitle = {Remote},
  year = {2026},
  doi = {10.3390/rs18010158},
}
Figure