Decacyclene Trianhydride at Functional Interfaces: An Ideal Electron Acceptor Material for Organic Electronics

Dimas G. de Oteyza, J. M. García‐Lastra, Francesca M. Toma, Patrizia Borghetti, Luca Floreano, Alberto Verdini, Albano Cossaro, Toan V. Pho, Fred Wudl, J. Enrique OrtegaThe Journal of Physical Chemistry Letters 2015 · DOI

TL;DR

This paper investigates the electronic properties of decacyclene-tri-anhydride (DTA), a promising organic semiconductor, when interfaced with gold and silver surfaces. They found that DTA readily accepts electrons from silver, making it an ideal candidate for organic electronics, and used a combination of experimental techniques and theoretical calculations to understand this phenomenon.

What Problem Does This Paper Address?

Organic electronics, such as organic light-emitting diodes (OLEDs) and organic photovoltaics (OPVs), rely on the efficient movement of electrons and holes within organic semiconductor materials. A critical factor for device performance is how well electrons or holes can be injected from the metal electrodes into the organic semiconductor. This injection process is governed by the alignment of energy levels at the metal-organic interface. While many organic semiconductors are good electron donors (p-type), finding efficient electron acceptors (n-type) that are stable and exhibit good charge transport properties has been a challenge. N-type organic materials often degrade in air, leading to poorer performance compared to their p-type counterparts. This paper addresses the need for better n-type organic semiconductors by exploring the interfacial properties of decacyclene-tri-anhydride (DTA), a molecule with multiple electron-withdrawing anhydride groups, on common metal surfaces like gold and silver. Understanding how DTA interacts with these surfaces is crucial for designing efficient organic electronic devices.

Methods

The researchers employed a multi-pronged approach combining experimental spectroscopy with theoretical calculations:

  • X-ray Photoelectron Spectroscopy (XPS): This technique was used to analyze the core levels (specifically C 1s and O 1s) of DTA molecules adsorbed on Au(111) and Ag(111) surfaces. Core level shifts are sensitive to the chemical environment and can reveal changes in electron distribution and energy level alignment at the interface.
  • Valence Band Photoemission Spectroscopy: This method probes the occupied electronic states of the DTA monolayers, including the Highest Occupied Molecular Orbital (HOMO).
  • Near Edge X-ray Absorption Fine Structure (NEXAFS) Spectroscopy: This technique was used to probe the unoccupied electronic states, particularly the Lowest Unoccupied Molecular Orbital (LUMO), of the DTA molecules. By analyzing the spectral features, the researchers could infer the extent of LUMO filling.
  • Density Functional Theory (DFT) Calculations: These calculations were performed to model the electronic structure of free-standing DTA molecules and DTA adsorbed on the metal surfaces. DFT helped to understand the energy level alignment, the spatial distribution of molecular orbitals, and the nature of the molecule-substrate interaction, providing a theoretical basis for the experimental observations.

Datasets

Not discussed in the paper. The study relies on experimental measurements performed on prepared samples and theoretical calculations.

Key Insights and Ideas

  • Electron Transfer to Silver: The most significant finding is the clear evidence of electron transfer from the Ag(111) substrate to the DTA molecule. This is indicated by the partial filling of the LUMO, which is observed in both photoemission and NEXAFS spectra.
  • DTA as an Ideal Electron Acceptor: The partial filling of the LUMO at the Fermi level on Ag(111) makes DTA an excellent electron acceptor material, as it lowers the energy barrier for electron injection from the metal.
  • Substrate-Dependent Interface: The interaction and energy level alignment differ between Au(111) and Ag(111). While DTA on Au(111) shows a more typical interface, the more reactive Ag(111) leads to a stronger molecule-substrate interaction and charge transfer.
  • Chemical Interaction Drives Charge Transfer: The observed charge transfer is not simply due to work function differences but is driven by a significant chemical interaction between DTA and the Ag(111) surface, likely involving the oxygen atoms of the anhydride groups.
  • DFT as a Predictive Tool: DFT calculations successfully reproduced the experimental findings, providing a deeper understanding of the molecular orbitals, their distribution, and the effect of the substrate on their energies and broadening. This validates the theoretical approach for predicting the behavior of similar organic semiconductors.

Key Results

  • Valence band photoemission showed the HOMO level of DTA on Ag(111) at approximately 0.4 eV higher binding energy compared to Au(111).
  • NEXAFS spectra revealed a partial filling of the LUMO on Ag(111), indicating electron transfer from the substrate.
  • Core-level shifts in XPS indicated that atoms with a strong contribution to the electron-accepting orbitals (LUMO/LUMO+1) showed less shift, consistent with charge transfer.
  • DFT calculations confirmed that the LUMO and LUMO+1 orbitals of DTA are involved in the charge transfer with Ag(111), leading to their partial filling.

Limitations and Future Work

  • Deconvolution Challenges: The authors note that deconvolution of the O 1s core-level spectra was hampered by inelastic background and satellites, making a precise analysis of the O1 intensity and energy variation from Au to Ag difficult.
  • Molecular Orientation: While the study suggests a lying-down molecular configuration, further detailed investigations into molecular orientation and its precise impact on spectral features could be beneficial.
  • Other Substrates: The study focused on Au(111) and Ag(111). Exploring interfaces with other metals, particularly those with lower work functions, could further optimize DTA's performance as an electron acceptor.
  • Device Integration: The understanding gained from this fundamental study is expected to be of great use for future research on DTA and similar n-type organic semiconductors, paving the way for their integration into functional organic electronic devices. Further work could involve fabricating and testing actual devices using DTA to confirm its potential.

Summary updated

Abstract

We report the interface energetics of decacyclene trianhydride (DTA) monolayers on top of two distinct model surfaces, namely, Au(111) and Ag(111). On the latter, combined valence band photoemission and X-ray absorption measurements that access the occupied and unoccupied molecular orbitals, respectively, reveal that electron transfer from substrate to surface sets in. Density functional theory calculations confirm our experimental findings and provide an understanding not only of the photoemission and X-ray absorption spectral features of this promising organic semiconductor but also of the fingerprints associated with the interface charge transfer.
BibTeX
@article{oteyza2015decacyclene,
  author = {Dimas G. de Oteyza and J. M. García‐Lastra and Francesca M. Toma and Patrizia Borghetti and Luca Floreano and Alberto Verdini and Albano Cossaro and Toan V. Pho and Fred Wudl and J. Enrique Ortega},
  title = {{Decacyclene Trianhydride at Functional Interfaces: An Ideal Electron Acceptor Material for Organic Electronics}},
  journal = {The Journal of Physical Chemistry Letters},
  year = {2015},
  doi = {10.1021/acs.jpclett.5b02562},
}
Figure