Introduction
The rapid expansion of the Internet of Things (IoT) presents a significant sustainability challenge: powering billions of sensors. Traditional batteries are not only a maintenance burden but also contribute to substantial electronic waste. While Energy Harvesting (EH) via Visible Light Communication (VLC) offers a "green" alternative, it is often hampered by spatial inconsistencies in indoor lighting and the "full bucket" inefficiency, where nodes stop harvesting once their storage is full, wasting available ambient energy.
To overcome these hurdles, this paper introduces DE-LIoT, a networking paradigm that reimagines the network as an energy distribution grid. By utilizing visible light to simultaneously transmit data and wirelessly "spill" excess energy between nodes, DE-LIoT enables well-lit nodes to support those in the shadows, achieving long-term energy autonomy.
The DE-LIoT Architecture
The DE-LIoT system employs a centralized architecture managed by an Optical Access Point (OAP). The network consists of Primary Sensor Nodes (PSN), located in resource-rich high-illumination areas, and Secondary Sensor Nodes (SSN), situated in resource-deficit low-light areas.
A core innovation of DE-LIoT is the use of dual-purpose hardware. As shown in the node design, the same LEDs and photodetectors are used for both communication and Optical Wireless Power Transfer (OWPT). This minimizes hardware complexity while enabling "Energy Spilling"—where PSNs intermittently activate transmitters to send energy bursts to neighboring SSNs.
The OAP serves as the system's "brain," monitoring the capacitor voltages of all nodes and dynamically adjusting the Energy Sharing Parameter ($N$). This parameter dictates the number of energy bursts a node performs, allowing the OAP to balance the network's power budget in real-time based on environmental conditions.
Experimental Validation and Results
The authors validated DE-LIoT using a hardware prototype featuring Arduino-based controllers, Organic Photovoltaics (OPV), and super-capacitors. By avoiding traditional lithium batteries and utilizing printed electronics, the system aligns with "Zero-Energy IoT" goals.
Key experimental findings include:
- Lifespan Extension: In standard data-only scenarios, shadowed nodes (SSNs) failed after 8 hours. With DE-LIoT energy sharing, these nodes maintained operation for the entire 60-hour test period, effectively achieving infinite lifespan.
- Recharge Efficiency: Energy spilling improved the average recharge time of deficit nodes by 12.8% at low light levels (150 lx).
- Illumination Boost: The Energy Transmission (ETX) mode increased average illumination around shadowed nodes by 50%, stabilizing their energy intake.
- Power Dynamics: The study identified Energy Transmission as the most power-intensive task (17.50 mW), contrasted with a "Deep Sleep" consumption of just 0.08 mW, highlighting the necessity of the OAP's centralized scheduling.
Conclusion and Future Outlook
DE-LIoT demonstrates that treating energy as a routable network resource can significantly enhance the sustainability of light-based IoT. While the current 3-node prototype proves the concept in static environments, future work will focus on scaling the system and developing robust algorithms to handle mobility and line-of-sight obstructions. Integrating DE-LIoT with hybrid Radio Frequency (RF) standards could further improve reliability in complex indoor spaces, moving closer to a truly maintenance-free, battery-less IoT ecosystem.
Summary updated