Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics

H. Yang, Kai Wu, Haikuo Guo, Jiali Wei, Jingwei Guo, Rui Liu, Xin Wang, Yali Bai, Yue Xu, Tiantian Li, Chengjun Zhu, Fuhua HouACS 2024 · DOI

Abstract

The seed method stands out as a straightforward and efficient approach for fabricating high-performance perovskite solar cells (PSCs). In this study, we propose the utilization of an antisolvent as an additive to induce crystal seeding, thereby facilitating the growth of wide-bandgap perovskite grains. Specifically, we introduce three commonly used antisolvents─ethyl acetate (EA), isopropanol (IPA), and chlorobenzene (CB)─directly into the perovskite precursor solution to generate perovskite seeds, which serve to promote subsequent nucleation. This antisolvent-crystal seeding method (ACSM) results in increased grain sizes, reduced film defects, and overall improved film quality. Consequently, the power conversion efficiencies (<i>PCE</i>s) of 1.647 eV PSCs with EA, IPA, and CB additives are recorded at 19.86%, 20.61%, and 20.45%, respectively, surpassing that of the reference device with a <i>PCE</i> of 18.83%. Furthermore, the stability of the PSCs prepared through ACSM is notably enhanced. Notably, PSCs optimized with IPA retain 75% of the original <i>PCE</i> after being stored in ambient air conditions (25 °C, RH ∼ 15%) for 30 days, better than the CB-added (64%) and the EA-added devices (53%), while the reference devices only retain 31% of the initial <i>PCE</i>. Moreover, even after continuous thermal annealing at 50 °C for 200 h, IPA-assisted devices demonstrate the best stability, followed by those with CB and EA, with the reference exhibiting the poorest stability.
BibTeX
@inproceedings{yang2024crystallinity,
  author = {H. Yang and Kai Wu and Haikuo Guo and Jiali Wei and Jingwei Guo and Rui Liu and Xin Wang and Yali Bai and Yue Xu and Tiantian Li and Chengjun Zhu and Fuhua Hou},
  title = {{Crystallinity Control and Strain Release in Wide-Bandgap Perovskite Film via Seed-Induced Growth for Efficient Photovoltaics}},
  booktitle = {ACS},
  year = {2024},
  doi = {10.1021/acsami.4c08445},
}

Loading related content...

Figure