Cryogenics and purification systems of the ICARUS T600 detector installation at Fermilab
Fatima Abd Alrahman, P. Abratenko, N. Abrego-Martinez, Antoni Aduszkiewicz, F. Akbar, L. Aliaga Soplin, M. Artero Pons, J. Asaadi, W. Badgett, B. Behera, Vincenzo Bellini, R. Benocci, N. Berger, S. Berkman, O. Beltramello, S. Bertolucci, M. Betancourt, Adrien Blanchet, F. Boffelli, M. Bonesini, T. Boone, B. Bottino, A. Braggiotti, J. Bremer, S. J. Brice, V. Brio, C. Brizzolari, H. S. Budd, A. Campani, A. Campos, D. Carber, M. Carneiro, I. Terrazas, H. Carranza, Francisco Fernandez, A. Castro, S. Centro, G. Cerati, M. Chalifour, P. Chambouvet, A. Chatterjee, D. Cherdack, S. Cherubini, N. Chithirasreemadam, T. E. Coan, A. Cocco, M. R. Convery, L. Cooper-Troendle, S. Copello, H. da Motta, M. Dall’Olio, A. A. Dange, A. De Roeck, S. Di Domizio, L. Di Noto, D. Di Ferdinando, M. Diwan, S. Dolan, L. Domine, S. Donati, Roza Doubnik, F. Drielsma, J. Dyer, S. Dytman, C. Fabre, A. Falcone, C. Farnese, A. Fava, N. Gallice, F. G. Garcia, C. Gatto, M. Geynisman, D. Gibin, A. Gioiosa, W. Gu, A. Guglielmi, G. Gurung, K. Hassinin, H. Hausner, A. Heggestuen, B. Howard, Ryan T. Howell, Z. Hulcher, I. Ingratta, C. James, W. Jang, Y. -j. Jwa, L. Kashur, W. Ketchum, Kim Js, Dae Koh, J. Larkin, Yufeng Li, X. Luo, C. Marshall, S. I. Martynenko, N. Mauri, K. S. McFarland, D. P. Méndez, A. MenegolliarXiv2025 · DOI · arXiv
This paper details the massive engineering effort behind the ICARUS T600 detector's "second life" at Fermi National Accelerator Laboratory (Fermilab). After a successful run in Italy, this pioneering Liquid Argon Time Projection Chamber (LAr-TPC) was moved, upgraded, and integrated into the Short-Baseline Neutrino (SBN) program. The authors describe the complex cryogenic and purification infrastructure required to keep 760 tons of liquid argon cold, stable, and—most importantly—incredibly pure.
TL;DR
The ICARUS T600 has been successfully relocated to Fermilab, achieving record-breaking argon purity (parts-per-trillion levels) and thermal stability. This paper outlines the redesigned cryogenic and purification systems that enable the high-fidelity 3D imaging necessary to hunt for sterile neutrinos.
What Problem Does This Paper Address?
Neutrinos are "ghost particles"—they rarely interact with matter. To study them, physicists use LAr-TPCs, which act like giant 3D digital cameras. When a neutrino hits an argon nucleus, it produces charged particles that leave a trail of ionization electrons.
The challenge is two-fold:
Extreme Purity: If the liquid argon contains even tiny amounts of electronegative impurities (like oxygen or water), they will "swallow" the ionization electrons before they can drift to the sensing wires. To see tracks across the 1.5-meter drift distance, impurities must be kept below 0.1 parts-per-billion (ppb).
Thermal Stability: The drift velocity of electrons depends on temperature. To maintain spatial resolution, the temperature across the massive 760-ton volume must be uniform to within 0.1 K.
Methods
The authors describe a multi-layered infrastructure designed to meet these stringent requirements:
Cryostat and Insulation: Two large aluminum vessels are housed in a common warm steel structure. They use a "passive" insulation scheme (600 mm of foam) combined with an active liquid nitrogen ($LN_2$) cooling shield.
Two-Phase Purification: The system purifies argon in both its liquid and gaseous states. Liquid is continuously recirculated through filters containing molecular sieves and copper-based media. Gaseous argon in the "ullage" (the space above the liquid) is also re-condensed and filtered to remove impurities outgassing from internal cables and materials.
Automated Control: A sophisticated control system using Siemens and Beckhoff PLCs manages over 200 analog inputs and 170+ temperature sensors. It employs a "master-child" hierarchy to automate complex procedures like pump startups and cooldowns.
Engineering Upgrades: The team redesigned the gas re-condensers to eliminate "goosenecks" (piping traps) that previously caused vapor locks, significantly improving cooling capacity.
Datasets
While not a traditional "data science" paper, the study relies on several years of operational monitoring:
Commissioning Data: Records of the initial 9-month vacuum pumping and subsequent cooldown/filling phases.
RUN0 & RUN2: Performance metrics from the first neutrino beam runs at Fermilab (2021–2023).
Purity Monitoring: Continuous measurements of "electron lifetime"—a proxy for argon purity—derived from cosmic ray muon tracks.
Key Insights and Ideas
The Gas Phase Matters: A major insight was that gas-phase purification is just as vital as liquid-phase. Impurities constantly outgas from the detector's internal components into the gas space; if not captured there, they eventually dissolve back into the liquid.
Venting as a Strategy: During early operations, the team found that periodic "flushing" (venting) of the gas phase was an effective way to remove accumulated impurities that the filters couldn't keep up with.
Purity vs. Recirculation: The paper demonstrates that purity isn't just about the filters; it's a dynamic equilibrium between the "leak rate" (impurities entering) and the "recirculation speed" (impurities being removed).
Key Results
Record Purity: The system achieved an electron lifetime of up to 4.5 ms in the East module and 3.2 ms in the West module. This corresponds to an oxygen-equivalent impurity level of roughly 0.07–0.09 ppb (or 70–90 parts-per-trillion).
Thermal Uniformity: The temperature across the entire sensitive volume was maintained within the target 0.1 K range.
Operational Success: The detector successfully recorded high-quality neutrino interaction events from Fermilab's Booster Neutrino Beam, proving the infrastructure's readiness for long-term physics data collection.
Limitations and Future Work
Maintenance Downtime: Servicing the cryogenic pumps (which require bearing replacements every 6,000–9,000 hours) currently requires a ~72-hour shutdown, leading to a temporary dip in argon purity.
Filter Longevity: The copper-based filtering media appeared to exhaust faster at liquid argon temperatures than predicted by room-temperature models.
Future Upgrades: The team plans to add more external filters to support argon refills and further optimize the gas recirculation rates to push electron lifetimes even higher.
Summary updated
Abstract
This paper describes the cryogenic and purification systems of the ICARUS T600 detector in its present implementation at the Fermi National Laboratory, Illinois, USA. The ICARUS T600 detector is made of four large Time Projection Chambers, installed in two separate containers of about 275 m3 each. The detector uses liquid argon both as target and as active media. For the correct operation of the detector, the liquid argon must be kept in very stable thermal conditions and the contamination of electronegative impurities must be consistently kept at the level of small fractions of parts per billion. The detector was previously operated in Italy, at the INFN Gran Sasso Underground laboratory, in a 3 year duration run on the CERN to LNGS Long Baseline Neutrino Beam. For its operation on the Booster and NuMI neutrino beams, at Fermilab, for the search of sterile neutrinos and measurements of neutrino-argon cross sections, the detector was moved from Gran Sasso to CERN for the upgrades required for operation at shallow depth with high intensity neutrino beams. The liquid argon containers, the thermal insulation and all the cryogenic equipment, have been completely re-designed and rebuild, following the schemes of the previous installation in Gran Sasso. The detector and all the equipment have been transported to Fermilab, where they have been installed, tested and recently put into operation. The work described in this paper has been conducted as a joint responsibility of CERN and Fermilab with the supervision provided by the Icarus Collaboration. Design, installation, testing, commissioning and operation is the result of a common effort of CERN, Fermilab and INFN Groups.
BibTeX
@misc{alrahman2025cryogenics,
author = {Fatima Abd Alrahman and P. Abratenko and N. Abrego-Martinez and Antoni Aduszkiewicz and F. Akbar and L. Aliaga Soplin and M. Artero Pons and J. Asaadi and W. Badgett and B. Behera and Vincenzo Bellini and R. Benocci and N. Berger and S. Berkman and O. Beltramello and S. Bertolucci and M. Betancourt and Adrien Blanchet and F. Boffelli and M. Bonesini and T. Boone and B. Bottino and A. Braggiotti and J. Bremer and S. J. Brice and V. Brio and C. Brizzolari and H. S. Budd and A. Campani and A. Campos and D. Carber and M. Carneiro and I. Terrazas and H. Carranza and Francisco Fernandez and A. Castro and S. Centro and G. Cerati and M. Chalifour and P. Chambouvet and A. Chatterjee and D. Cherdack and S. Cherubini and N. Chithirasreemadam and T. E. Coan and A. Cocco and M. R. Convery and L. Cooper-Troendle and S. Copello and H. da Motta and M. Dall’Olio and A. A. Dange and A. De Roeck and S. Di Domizio and L. Di Noto and D. Di Ferdinando and M. Diwan and S. Dolan and L. Domine and S. Donati and Roza Doubnik and F. Drielsma and J. Dyer and S. Dytman and C. Fabre and A. Falcone and C. Farnese and A. Fava and N. Gallice and F. G. Garcia and C. Gatto and M. Geynisman and D. Gibin and A. Gioiosa and W. Gu and A. Guglielmi and G. Gurung and K. Hassinin and H. Hausner and A. Heggestuen and B. Howard and Ryan T. Howell and Z. Hulcher and I. Ingratta and C. James and W. Jang and Y. -J. Jwa and L. Kashur and W. Ketchum and Kim Js and Dae Koh and J. Larkin and Yufeng Li and X. Luo and C. Marshall and S. I. Martynenko and N. Mauri and K. S. McFarland and D. P. Méndez and A. Menegolli},
title = {{Cryogenics and purification systems of the ICARUS T600 detector installation at Fermilab}},
year = {2025},
eprint = {2509.18392},
archivePrefix = {arXiv},
url = {https://arxiv.org/abs/2509.18392},
}