Crucial role of hydroxyl in CO selectivity for integrated CO2 capture and electrocatalytic reduction

Shaona Wang, Yang Yang, Wenqing Xu, Zhuoshu Bai, Fabing Su, Yixi Wang, Dingrong Bai, Tingyu ZhuCarbon 2026 · DOI

Abstract As an integrated $CO_2$ capture and utilization (ICCU) process, direct electrochemical reduction of amine captured-$CO_2$ reduction reaction ($cCO_2RR$) has enormous advantages in energy efficiency and operating cost. The low product selectivity is an urgent issue. Here, we found that the hydroxyl (-OH) on $CeO_2$ can significantly enhance CO selectivity. After hydroxyl modification, the CO faraday efficiency ($FE_{CO}$) was surprisingly increased by 188% (relative increase rate). The correlation coefficient between -OH quantity and $FE_{CO}$ is as high as 0.98. Further study indicated that the presence of -OH can lead to a more compact electrochemical double layer (EDL) and charge transfer resistance by proton transfer. The -OH can also enhance $CO_2$ adsorption and stabilize the intermediate species (*COOH). DFT results further demonstrate that the rate-determining step was proton transfer from the surface -OH to $MEACOO^-$, -OH modification can reduce the energy barrier to as low as 0.39 eV. This work provides additional insights into improving selectivity in amine-based $cCO_2RR$, advancing the development of ICCU technology.

Introduction

Traditional Carbon Capture and Utilization (CCU) is often energy-intensive due to the high temperatures (120–150 °C) required to strip $CO_2$ from amine capture solvents like monoethanolamine (MEA). Integrated $CO_2$ capture and utilization (ICCU) aims to bypass this costly step by directly reducing the captured $CO_2$—now in the form of carbamates—via electrolysis ($cCO_2RR$). However, a major hurdle is selectivity; the negatively charged carbamate molecules are electrostatically repelled from the cathode, often leading to unwanted hydrogen production instead of the desired carbon monoxide (CO).

Catalyst Design and Characterization

To overcome these selectivity barriers, researchers developed silver nanoparticles (AgNPs) supported on various metal oxides ($CeO_2$, $ZrO_2$, and $TiO_2$). The physical structure and elemental distribution of these catalysts were analyzed using High-Resolution Transmission Electron Microscopy (HRTEM) and Energy Dispersive Spectroscopy (EDS) mapping.

HRTEM images and EDS elemental mapping of Ag supported on $CeO_2$, $ZrO_2$, and $TiO_2$, showing the morphology and distribution of silver nanoparticles on the oxide supports.

Characterization confirmed that Ag nanoparticles were successfully dispersed across the supports. The study then focused on how the surface chemistry of these supports, particularly the presence of hydroxyl (-OH) groups, influenced the electrochemical performance.

The Hydroxyl Effect: Mechanism and Performance

A critical discovery was the near-perfect linear correlation ($R^2 = 0.98$) between the quantity of surface -OH groups and CO selectivity. X-ray Photoelectron Spectroscopy (XPS) was utilized to examine the electronic states of the silver and the interaction with the supports.

XPS spectra of the Ag 3d region for AgNPs and the supported catalysts, illustrating the binding energy shifts associated with different metal oxide supports.

The -OH groups on $CeO_2$ act as Brønsted acid sites that facilitate "proton shuttling." By donating a proton to the negatively charged carbamate ($MEACOO^-$), the hydroxyl groups neutralize the reactant, allowing it to reach the electrode surface more easily. This mechanism creates a more compact electrochemical double layer and significantly lowers the energy barrier for the rate-determining step—proton transfer to the carbamate.

Key Results and Insights

  • Selectivity Boost: The $Ag/CeO_2$ catalyst achieved a CO Faradaic efficiency ($FE_{CO}$) of 53.2%, a 188% relative increase over unsupported AgNPs.
  • Lowered Energy Barriers: DFT calculations revealed that -OH modification on $CeO_2$ reduced the energy barrier for the rate-determining step to just 0.39 eV, compared to 1.72 eV for $ZrO_2$.
  • Kinetic Improvement: $Ag/CeO_2$ exhibited a lower Tafel slope and a 30.27% reduction in charge transfer resistance compared to standard AgNPs, indicating faster and more efficient reaction kinetics.

Conclusion

This research identifies surface hydroxyl groups as a pivotal factor in governing selectivity for integrated $CO_2$ reduction. By leveraging the proton-donating capabilities of supports like $CeO_2$, the efficiency of amine-based ICCU can be dramatically improved, offering a more sustainable path for industrial carbon management.

Summary updated

Abstract

Abstract As an integrated CO 2 capture and utilization (ICCU) process, direct electrochemical reduction of amine captured-CO 2 reduction reaction (cCO 2 RR) has enormous advantages in energy efficiency and operating cost. The low product selectivity is an urgent issue. Here, we found that the hydroxyl (-OH) on CeO 2 can significantly enhance CO selectivity. After hydroxyl modification, the CO faraday efficiency (FE CO ) was surprisingly increased by 188% (relative increase rate). The correlation coefficient between -OH quantity and FE CO is as high as 0.98. Further study indicated that the presence of -OH can lead to a more compact electrochemical double layer (EDL) and charge transfer resistance by proton transfer. The -OH can also enhance CO 2 adsorption and stabilize the intermediate species (*COOH). DFT results further demonstrate that the rate-determining step was proton transfer from the surface -OH to MEACOO − , -OH modification can reduce the energy barrier to as low as 0.39 eV. This work provides additional insights into improving selectivity in amine-based cCO 2 RR, advancing the development of ICCU technology.
BibTeX
@inproceedings{wang2026crucial,
  author = {Shaona Wang and Yang Yang and Wenqing Xu and Zhuoshu Bai and Fabing Su and Yixi Wang and Dingrong Bai and Tingyu Zhu},
  title = {{Crucial role of hydroxyl in CO selectivity for integrated CO2 capture and electrocatalytic reduction}},
  booktitle = {Carbon},
  year = {2026},
  doi = {10.1007/s43979-025-00157-4},
}
Figure