Crossbeam Structure Optimization Using Orthogonal Experimental Combined Weighting Method

Shuai Ye, Yun Xu, Z. G. Wen, Hailin Liao, Tao ZhangAcademic 2025 · DOI

TL;DR

This paper presents a robust optimization framework for the crossbeam of a CNC gantry machining center, a component critical for machining precision. By combining orthogonal experimental design with a hybrid weighting method—integrating objective data analysis (Entropy Method) with expert judgment (Fuzzy AHP)—the researchers achieved a 9.4% reduction in mass while simultaneously doubling the beam's rigidity and significantly boosting its vibration resistance.

What Problem Does This Paper Address?

In the world of high-precision manufacturing, the gantry crossbeam is a "moving target" for designers. It needs to be lightweight to allow for high-speed movement and energy efficiency, yet it must remain incredibly stiff to prevent deformations that ruin machining accuracy.

Traditional design often relies on trial-and-error or purely subjective expert opinions, which can lead to sub-optimal structures. The challenge lies in balancing multiple conflicting objectives: mass, maximum deformation, equivalent stress, and natural frequency. The authors aim to move beyond "gut feeling" by providing a mathematical framework that balances objective simulation data with engineering expertise.

Methods

The researchers employed a multi-stage optimization workflow:

  1. Orthogonal Experimental Design: Instead of testing every possible combination of design factors (which would be computationally expensive), they used an orthogonal table to select representative design points. They varied four factors: stiffener structure type, stiffener thickness, overall beam layout (rectangular vs. trapezoidal), and rail type.
  2. Finite Element Analysis (FEA): Using SolidWorks and ANSYS, they simulated the static and dynamic performance of eight distinct design schemes.
  3. Combined Weighting Method: This is the paper's core methodological contribution. They calculated evaluation weights using two different approaches:
  4. Entropy Weight Method (EWM): An objective approach that calculates weights based on the variance in the simulation data.
  5. Fuzzy Analytic Hierarchy Process (FAHP): A subjective approach that incorporates expert rankings of the criteria.
  6. By merging these into a multiplicative synthesis, they created a "Combined Weight" that is more reliable than either method alone.
  7. Sensitivity Analysis: After identifying the best general scheme, they performed a sensitivity analysis on nine specific internal dimensions to find which ones most influenced performance, allowing for a final round of "fine-tuning" optimization.

Datasets

The study does not use a traditional external dataset. Instead, it generates its own data through Finite Element Simulations of eight specific design configurations. The material properties used for all simulations were based on Gray cast iron HT300 (Elastic modulus: 130 GPa, Poisson's ratio: 0.3, Density: 7300 kg/m³).

Key Insights and Ideas

  • Data vs. Intuition: The paper highlights that while Scheme 1 was the "winner" in the fuzzy evaluation, it actually ranked 6th in terms of deformation. This "aha moment" led the authors to realize that the best overall scheme still required targeted dimensional optimization to fix its specific weaknesses.
  • The Power of Pruning: Through sensitivity analysis, the authors found that only 4 out of 9 key dimensions (P1, P8, P13, P15) significantly impacted the optimization goals. By ignoring the "noise" of the other 5 parameters, they could focus their computational power on the variables that actually moved the needle.
  • Rounding for Reality: A practical insight often missed in academic papers is the "rounding" step. Optimized dimensions from software are often too precise for manufacturing (e.g., 18.1mm). The authors re-analyzed their design after rounding to standard manufacturing dimensions to ensure the performance gains held up in the real world.

Key Results

The final optimized crossbeam showed dramatic improvements over the original design:

  • Mass: Reduced by 205.6 kg (9.4% decrease), achieving the lightweight goal.
  • Rigidity: Maximum deformation was slashed by 50% (from 0.0286 mm to 0.0143 mm).
  • Stress: Maximum equivalent stress decreased by 7.4%.
  • Vibration Resistance: The first-order natural frequency increased by 26.29% (a rise of 7.541 Hz), meaning the beam is much less likely to resonate during high-speed operations.

Limitations and Future Work

The authors acknowledge several areas for improvement:

  • Material Diversity: The study only looked at one material (HT300). Future work could explore composite materials or different alloys to push the lightweighting further.
  • Subjectivity: While the hybrid weighting method reduces bias, the FAHP component still relies on expert scoring, which can vary between different engineering teams.
  • Observability: The data acquisition process is noted as being somewhat "insufficient" due to its reliance on simulated rather than purely empirical real-time sensor data during the initial design phase.

Future research could integrate real-world sensor feedback from manufactured prototypes to further refine the digital twin models used in the optimization process.

Summary updated

Abstract

The machining quality of the gantry machining center is directly impacted by the structural performance of the crossbeam, which is one of its key moving components. The optimization of the overall performance of the crossbeam is aimed to be achieved through the conduct of finite element analysis and the utilization of orthogonal experimental methods, along with a combination weighting approach to strengthen the quantitative data analysis. The research investigates the influence of different design approaches on the rigidity and vibration characteristics of the crossbeam. By integrating structural optimization and data analysis, a well-rounded crossbeam design solution with superior overall performance is proposed. Following optimization, the beam's mass was reduced by 205.6kg, a decrease of 9.4%, maximum deformation reduced by 0.0143mm, a decrease of 50%, maximum equivalent stress decreased by 0.839MPa, a decrease of 7.4%, and simultaneously, the first-order natural frequency increased by 7.541Hz, a rise of 26.29%. Through effective optimization, the crossbeam's static and dynamic performance improved while achieving lightweight design under the premise of ensuring rigidity.
BibTeX
@inproceedings{ye2025crossbeam,
  author = {Shuai Ye and Yun Xu and Z. G. Wen and Hailin Liao and Tao Zhang},
  title = {{Crossbeam Structure Optimization Using Orthogonal Experimental Combined Weighting Method}},
  booktitle = {Academic},
  year = {2025},
  doi = {10.54097/3ktbq195},
}
Figure