Crack-Based Composite Flexible Sensor with Superhydrophobicity to Detect Strain and Vibration

Yazhou Zhang, Huansheng Wu, Linpeng Liu, Yang Yang, Changchao Zhang, Ji’an DuanPolymers 2024 · DOI

TL;DR

Researchers have developed a novel flexible vibration sensor that combines superhydrophobicity with a unique crack-based design. This sensor can accurately detect vibrations across a wide frequency range (up to 2000 Hz) and in challenging wet or underwater environments, offering a significant advantage over traditional rigid sensors.

What Problem Does This Paper Address?

Current vibration sensors, often made from rigid materials like metals and ceramics, face limitations in practical applications. Their hardness makes them difficult to mount on irregular surfaces common in machinery. Furthermore, many existing flexible sensors struggle to operate reliably in wet or humid conditions, which are prevalent in many industrial and environmental settings. This gap creates a need for robust, flexible, and cost-effective vibration sensors that can perform accurately in diverse and demanding environments, including underwater.

Methods

The core innovation lies in the sensor's fabrication and design. A flexible PDMS (polydimethylsiloxane) film serves as the substrate. This film is patterned with parallel, through-cracks using a femtosecond laser ablation technique. This crack structure is crucial for enhancing sensitivity to subtle mechanical deformations. Following this, a conductive ink composed of multi-walled carbon nanotubes (MWCNTs), carbon black (CB), and PDMS is spray-coated onto the cracked surface. This composite layer not only provides conductivity but also, due to its surface morphology, imparts superhydrophobic properties. The sensor is then completed with conductive silver paste electrodes and copper foil.

Datasets

Not discussed in the paper. The paper focuses on the fabrication and characterization of a single sensor design, with performance evaluated through controlled experiments rather than training on large datasets.

Key Insights and Ideas

  • Crack-based design for enhanced sensitivity: The parallel microcracks on the PDMS substrate act as stress concentrators. When the sensor experiences vibration, these cracks deform significantly, leading to a more pronounced change in the conductive path and thus a stronger electrical signal. This is a clever way to amplify small mechanical inputs.
  • Superhydrophobicity for environmental resilience: The spray-coating process, combined with the carbon nanomaterials, naturally creates a rough surface morphology that repels water. This superhydrophobic nature (water contact angle > 150°) is critical for enabling reliable operation in wet and underwater conditions, a major limitation for many other flexible sensors.
  • Versatility beyond vibration: The sensor's flexibility and strain-sensitive nature also allow it to function as a strain sensor, demonstrating its potential for broader applications.
  • Mimicking nature for function: While not explicitly stated as biomimicry, the crack pattern and the resulting flexibility and sensitivity echo principles found in biological systems, suggesting a potential avenue for future bio-inspired sensor designs.

Key Results

  • High-frequency response: The sensor can detect vibrations up to 2000 Hz.
  • High acceleration sensitivity: It exhibits a high acceleration response of up to 100 m/s².
  • Excellent superhydrophobicity: A water contact angle of 159.61° was measured, and the superhydrophobic properties remained stable for over 40,000 vibration cycles.
  • Linearity: A high linearity of 0.9812 was achieved between the voltage signal and acceleration.
  • Underwater operation: The sensor demonstrated stable performance in both air and underwater environments.
  • Strain sensing: The sensor showed a gauge factor of 2.46 for strains up to 22% with high linearity.
  • Speech recognition: The sensor successfully captured and distinguished speech vibrations, indicating potential for human-machine interfaces.
  • Machinery monitoring: The sensor was successfully applied to monitor vibrations during rock fracturing in a shield tunneling machine, identifying different operational states.

Limitations and Future Work

  • Underwater performance nuances: While functional underwater, the sensor's response was noted to be slightly less stable and with lower voltage amplitude compared to air operation. The paper suggests that water might dampen the mechanical deformation, leading to less resistance variation. Further investigation into optimizing underwater performance could be beneficial.
  • Long-term durability in extreme conditions: While stability over 40,000 cycles was demonstrated for superhydrophobicity, the long-term mechanical durability of the crack structure and conductive layer under continuous extreme vibration or harsh chemical environments could be a subject for future study.
  • Integration and miniaturization: While the fabrication is described as simple and cost-effective, further work on integrating these sensors into complex systems and potentially miniaturizing them for more widespread deployment could be explored.
  • Advanced signal processing: The paper hints at applications in signal classification and fault detection. Future work could focus on developing more sophisticated signal processing algorithms to extract richer information from the sensor's output for advanced diagnostics.

Summary updated

Abstract

Vibration sensors are widely applied in the detection of faults and analysis of operational states in engineering machinery and equipment. However, commercial vibration sensors with a feature of high hardness hinder their usage in some practical applications where the measured objects have irregular surfaces that are difficult to install. Moreover, as the operating environments of machinery become increasingly complex, there is a growing demand for sensors capable of working in wet and humid conditions. Here, we present a flexible, superhydrophobic vibration sensor with parallel microcracks. The sensor is fabricated using a femtosecond laser direct writing ablation strategy to create the parallel cracks on a PDMS film, followed by spray-coating with a conductive ink composed of MWCNTs, CB, and PDMS. The results demonstrate that the developed flexible sensor exhibits a high-frequency response of up to 2000 Hz, a high acceleration response of up to 100 m/s<sup>2</sup>, a water contact angle as high as 159.61°, and a linearity of 0.9812 between the voltage signal and acceleration. The results indicate that the sensor can be employed for underwater vibration, sound recognition, and vibration monitoring in fields such as shield cutters, holding significant potential for mechanical equipment vibration monitoring and speech-based human-machine interaction.
BibTeX
@inproceedings{zhang2024crack,
  author = {Yazhou Zhang and Huansheng Wu and Linpeng Liu and Yang Yang and Changchao Zhang and Ji’an Duan},
  title = {{Crack-Based Composite Flexible Sensor with Superhydrophobicity to Detect Strain and Vibration}},
  booktitle = {Polymers},
  year = {2024},
  doi = {10.3390/polym16172535},
}
Figure