Abstract
Lithium-rich layered transition metal oxide positive electrodes offer access to anion redox at high potentials, promising high energy densities for lithium-ion batteries. However, anion redox is associated with unfavorable properties like open-circuit voltage hysteresis. This study reveals that in $\text{Li}_{1.17–x}\text{Ni}_{0.21}\text{Co}_{0.08}\text{Mn}_{0.54}\text{O}_2$, these properties arise from a strong coupling between anion redox and cation migration. Partially reversible transition metal migration decreases the potential of the bulk oxygen redox couple by > 1 V, reordering anionic and cationic redox potentials during cycling. This mechanism, driven by changes in local oxygen coordination, stabilizes the oxygen redox couple for over 500 cycles.
Introduction: The Challenge of Voltage Hysteresis
To surpass the energy density limits of current Li-ion batteries, researchers are investigating "lithium-rich" layered oxides. Unlike standard cathodes that only cycle transition metals, these materials trigger "anion redox," extracting electrons from oxygen atoms to provide a massive capacity boost. However, this process is plagued by significant voltage hysteresis: the battery requires a much higher voltage to charge than it delivers during discharge, leading to poor energy efficiency and "voltage fade" over time.
Experimental and Computational Methods
The authors employed a multi-modal approach to determine if oxygen redox is a bulk or surface phenomenon. Scanning Transmission X-ray Microscopy (STXM) combined with X-ray Absorption Spectroscopy (XAS) allowed for nanoscale mapping of the bulk of primary particles. Resonant Inelastic X-ray Scattering (RIXS) was used to identify a unique electronic fingerprint for oxidized oxygen, while synchrotron XRD quantified the migration of transition metals (TM) into lithium layers. These findings were supported by first-principles Density Functional Theory (DFT) calculations to model how metal movement affects the electronic state of surrounding oxygen.
Mechanistic Insights: Oxygen Redox and Cation Migration
The study identifies a "dynamic reordering" of redox potentials. During charging, metal redox occurs first, followed by oxygen redox. Crucially, as oxygen is oxidized, transition metal atoms migrate from their original layers into vacancies in the lithium layers. This migration drastically changes the local coordination environment of the oxygen atoms, making them "under-coordinated" and lowering their redox potential by more than 1 V.
As shown in the experimental data, TM occupancy in the lithium layer increases from approximately 2.8% to 9.0% during the high-voltage charge plateau. Because of this structural shift, during discharge, the metals reduce before the oxygen. While cation migration is often viewed as a failure mode, the authors propose that this specific coupling actually stabilizes the oxygen redox couple, preventing oxygen gas evolution and allowing the mechanism to persist for 500 cycles with 94% capacity retention in optimized 18650-format cells.
Conclusion and Future Directions
The large voltage hysteresis in Li-rich layered oxides is fundamentally explained by the coupling between oxygen redox and partially reversible cation migration. While this mechanism stabilizes the capacity, the energy loss remains a challenge. Future work will focus on strategies to tune cation migration pathways to minimize hysteresis while maintaining structural stability, potentially by utilizing heavier 4d or 5d transition metals to further stabilize the crystal lattice.
Summary updated