Abstract
In hybrid satellite-terrestrial networks (HSTNs), spectrum sharing is crucial to alleviate the “spectrum scarcity” problem. Therein, the transmit beams should be carefully designed to mitigate the inter-satellite-terrestrial interference. Different from previous studies, this work considers the impact of both nonlinear power amplifier (PA) and large-scale channel state information at the transmitter (CSIT) on beamforming. These phenomena are usually inevitable in a cost-effective practical HSTN. Based on the Saleh model of PA nonlinearity and the large-scale multi-beam satellite channel parameters, we formulate a beamforming optimization problem to maximize the achievable rate of the satellite system while ensuring that the inter-satellite-terrestrial interference is below a given threshold. The optimal amplitude and phase of desired beams are derived in a decoupled manner. Simulation results demonstrate the superiority of the proposed beamforming scheme.
Introduction: The Challenge of Spectrum Sharing in HSTNs
As the demand for wireless connectivity grows, Hybrid Satellite-Terrestrial Networks (HSTNs) have emerged as a promising solution to "spectrum scarcity" by allowing satellite and terrestrial networks to share the same frequency bands. However, this coexistence introduces significant challenges, primarily the management of inter-system interference. To mitigate this, satellites employ beamforming—a technique to shape signal transmission toward intended targets while minimizing leakage to terrestrial users.
Most existing research assumes idealized conditions: perfect, real-time Channel State Information at the Transmitter (CSIT) and perfectly linear hardware. In reality, satellites often only have access to "large-scale" CSIT (slowly-varying data like location and path loss) due to the high cost and latency of real-time updates. Furthermore, to maintain cost-effectiveness, satellites utilize Power Amplifiers (PAs) that are inherently nonlinear, causing signal distortion when pushed toward saturation. This paper addresses the design of optimal beams under these realistic constraints.
Methodology: Decoupling Complexity
The researchers modeled PA nonlinearity using the Saleh model, which describes how input amplitude and phase are distorted at the output. They also employed a composite multi-beam satellite channel model that separates stable large-scale parameters from volatile small-scale atmospheric phase shifts.
The resulting optimization problem is "non-convex," making it difficult to solve directly. The authors' approach involves three key steps:
- Decoupling: Proving that the optimal phase and amplitude of the beams can be determined independently.
- Feasible Region Reduction: Narrowing the search space based on the physical saturation points of the PAs.
- Variable Substitution: Recasting the non-convex problem into a convex optimization problem, allowing for efficient solution using standard mathematical tools.
Key Insights: Navigating the Saturation Trap
A primary finding is the "saturation trap." Traditional beamformers often maximize gain by increasing power to antennas with the best channels. With nonlinear PAs, this strategy backfires; once an amplifier hits its saturation point, additional power only increases distortion, actually decreasing overall performance.
The authors also demonstrated that Large-Scale CSIT is sufficient. By correctly accounting for nonlinearity, designing for "average" channel conditions proves highly effective, removing the need for costly millisecond-by-millisecond updates.
Results and Performance
Simulations with a 16-antenna satellite system showed that the proposed algorithm consistently outperforms Maximum Ratio Transmission (MRT) and other state-of-the-art hybrid beamforming methods.
As shown in the results, the performance gap widens as the input power limit increases. While competing methods "choke" or plateau as they hit PA saturation, the proposed algorithm adapts its beam weights to remain within the hardware's efficient operating range. Additionally, the algorithm successfully maintains interference to terrestrial users below critical thresholds (e.g., -107 dBm) while maximizing satellite throughput.
Conclusion and Future Directions
This work provides a robust framework for beamforming in practical, cost-constrained HSTNs. While the current study focuses on a single interfering link, future research could extend this to multi-user scenarios and more complex amplifier models that account for memory effects. Nonetheless, the ability to achieve high data rates using large-scale CSIT and nonlinear hardware marks a significant step toward viable, large-scale hybrid networks.
Summary updated