Abstract
For large-scale Internet of Things (IoT), backscatter communication is a promising technology to reduce power consumption and simplify deployment. However, backscatter communication lacks stability, along with limited communication range within a few meters. Due to the limited computation ability of backscatter tags, it is burdensome to effectively adapt the bitrate for the time-varying channel. Thus, backscatter tags are failed to fully utilize the optimal transmission rate. In this paper, we design a system named COOK with self-reliant bitrate adaptation in backscatter communication. Channel symmetry allows backscatter tags to adjust bitrate depending on the received signal strength of the excitation source (ES) without feedback. In addition, the chirp spreading signal is exploited as the ES signal to enable backscatter tags to work under noise floor. Our modulation approach is denoted as Chirp-OOK since the tags reflect the chirp signal by employing the on-off keying modulation. It allows that receiver can decode under the noise floor and the bitrate varies flexibly as the communication range changes. We have implemented the prototype system based on the universal software radio peripheral (USRP) platform. Extensive experiment results demonstrate the effectiveness of the proposed system. Our system provides valid communication distance up to 27m, which is 7 times as compared with normal backscatter system. The system significantly increases the backscatter communication stability, by supporting bitrate adaptation ranges from 0.33kbps to 1.2Mbps, and guaranteeing the bit error rate (BER) is below 1%.
Introduction
Backscatter communication is a cornerstone of low-power IoT, enabling tags to transmit data by reflecting existing radio signals from an Excitation Source (ES). While energy-efficient, traditional backscatter systems suffer from limited range and a lack of adaptive bitrate mechanisms. Implementing Adaptive Data Rate (ADR) is typically challenging because tags lack the computational power for complex channel estimation, and feedback from distant receivers consumes excessive energy. COOK (Chirp-OOK Optimized Communication) addresses these hurdles by pushing complexity to the powered infrastructure while keeping the tag hardware simple and self-reliant.
System Design and Methodology
COOK introduces a novel modulation scheme and an autonomous adaptation logic to stabilize and extend backscatter links.
Chirp-OOK Modulation
Unlike standard systems that use single-frequency carriers, COOK utilizes a Chirp Spread Spectrum (CSS) signal from the ES. The tag performs simple On-Off Keying (OOK) by modulating its reflection state. This allows the receiver to use correlation techniques to extract signals from beneath the noise floor, significantly extending the operational range.
Self-reliant Bitrate Adaptation
The system leverages channel symmetry, the principle that the signal strength a tag receives from the ES is a reliable proxy for the link quality the receiver will experience. By measuring the ES signal locally, the tag can independently adjust its bitrate without requiring feedback packets from the receiver, eliminating significant control overhead.
Dynamic Threshold Decoding
To combat signal fluctuations in mobile environments, COOK employs a dynamic thresholding algorithm. Instead of a fixed decoding threshold, the system updates its parameters in real-time based on the previous FFT peak values of the received signal, maintaining link stability where traditional OOK would fail.
Key Insights: Spatial Signal Distribution
The theoretical foundation for COOK's adaptation logic is the predictable spatial distribution of signal strength. As illustrated in the 3D signal strength distributions for monostatic and bistatic deployments, the consistent decay patterns validate that local signal measurements at the tag are sufficient for determining the optimal transmission rate.
Experimental Results
The COOK prototype was evaluated using an NI USRP-RIO platform and modified "HitchHike" tags in various indoor and outdoor environments.
- Extended Range: The system achieved a maximum communication distance of 27 meters, representing a 7x improvement over standard ambient backscatter systems.
- Bitrate Versatility: COOK supports a wide dynamic range of bitrates, from 0.33 kbps at long range up to 1.2 Mbps at short range.
- Reliability: Across all tested distances and rates, the system maintained a Bit Error Rate (BER) of less than 1%.
- Environmental Stability: Experimental results showed that the dynamic thresholding algorithm successfully maintained link stability across varying environmental factors ($K$-factors).
Conclusion
COOK demonstrates that high-speed, long-range backscatter is possible without increasing tag complexity. By combining Chirp-OOK modulation with self-reliant bitrate adaptation, the system provides a robust solution for large-scale IoT. Future work will focus on optimizing the "blank area" in distance-rate tradeoffs and enhancing the speed of signal strength detection for highly mobile scenarios.
Summary updated