Conversion of photon temporal shape using single gradient metasurface

Zhaohua Tian, Qi Liu, Yu Tian, Ying GuarXiv 2025 · DOI · arXiv

Abstract

By applying phase modulation across different frequencies, metasurfaces possess the ability to manipulate the temporal dimension of photons at the femtosecond scale. However, there remains a fundamental challenge to shape the single wavepacket at the nanosecond scale by using of metasurfaces. Here, we propose that the single photon temporal shape can be converted through the multi-photon wavepacket interference on a single metasurface. By selecting appropriate input single-photon temporal shapes and metasurfaces beam splitting ratio, controllable photon shape conversion can be achieved with high fidelity. For examples, photons with an exponentially decaying profile can be shaped into a Gaussian profile; by tuning the relative time delays of input photons, Gaussian-shaped photons can be transformed into exponentially decaying or rising profiles through the same metasurface. The proposed mechanism provides a compact way for solving the temporal shape mismatch issues in quantum networks, facilitating the realization of high-fidelity on-chip quantum information processing.

Introduction: The Challenge of Temporal Shaping

In quantum information processing, the temporal profile of a photon is a critical parameter that determines its interaction efficiency with other quantum systems. For example, Gaussian-shaped photons are optimal for quantum interference, whereas exponentially rising (ER) photons are required for efficient loading into resonant cavities. However, most solid-state quantum emitters, such as quantum dots, naturally produce photons with an exponentially decaying (ED) profile.

Bridging this gap requires converting ED photons into Gaussian or ER shapes. Existing solutions often involve bulky electro-optic modulators or complex emitter control, which are difficult to scale for integrated on-chip quantum circuits. While metasurfaces offer a compact alternative for light manipulation, they typically rely on frequency dispersion, which is ineffective for nanosecond-scale photons due to their extremely narrow spectral bandwidths. This paper introduces a method to overcome this limitation using multi-photon wavepacket interference on a single phase-gradient metasurface.

Methodology: Multi-Photon Interference on Metasurfaces

The proposed approach bypasses the need for frequency-dependent phase response by utilizing the metasurface as a multi-mode beam splitter to induce interference between photon wavepackets.

Conceptual diagram of the metasurface-based photon temporal shape conversion process.

The process involves four key steps:

  1. Input Preparation: Three distinct photon wavepackets are directed into separate input modes of a phase-gradient metasurface.
  2. Interference Mechanism: The metasurface acts as a four-mode beam splitter, causing the photons to become temporally entangled as they pass through.
  3. Joint Measurement: Photon Number Resolving Detectors (PNRDs) perform joint Time-Resolved Measurements (TRMs) on two of the output modes.
  4. Heralded Output: Detecting photons at specific times "heralds" the third photon in the remaining output mode. Its temporal shape becomes a coherent superposition of the inputs, determined by the metasurface's splitting ratio and the detection timing.

This mechanism is highly programmable. By adjusting input shapes, relative time delays, or measurement timing, a single physical metasurface can generate a variety of output temporal profiles.

Key Results and Performance

The theoretical framework demonstrates high-fidelity conversion across several common photon profiles. A primary achievement is the conversion of exponentially decaying (ED) photons into a Gaussian profile.

Demonstration of high-fidelity conversion from exponentially decaying input photons to a Gaussian output profile.

Key performance metrics include:

  • ED to Gaussian Conversion: Achieved a fidelity of 99.7% with an 8.86% selection probability. Increasing the success probability to 28% still maintains a high fidelity of 98.3%.
  • Gaussian to ER/ED Conversion: By adjusting input delays and incorporating an additional 50/50 beam splitter, the system achieved 97.7% fidelity for both exponentially rising and decaying profiles.
  • Robustness: The shaping fidelity remains above 95% even with $\pm5\%$ deviations in the metasurface's co-polarization conversion coefficient, indicating strong feasibility for physical fabrication.
  • Detector Requirements: High fidelity is maintained if the detector's temporal resolution is within 10% of the target photon's width, which is compatible with current technology.

Conclusion and Future Outlook

While the proposed method is probabilistic due to its reliance on post-selection (with success rates between 4% and 28%), it offers a compact and scalable solution for on-chip quantum networks. By shifting the shaping mechanism from dispersion to interference, metasurfaces can now manipulate nanosecond-scale quantum states. Future work will likely focus on the experimental integration of these metasurfaces onto photonic chips, enabling deterministic quantum state transfer and advanced quantum logic gates by resolving temporal mismatch issues.

Summary updated

Abstract

By applying phase modulation across different frequencies, metasurfaces possess the ability to manipulate the temporal dimension of photons at the femtosecond scale. However, there remains a fundamental challenge to shape the single wavepacket at the nanosecond scale by using of metasurfaces. Here, we propose that the single photon temporal shape can be converted through the multi-photon wavepacket interference on a single metasurface. By selecting appropriate input single-photon temporal shapes and metasurfaces beam splitting ratio, controllable photon shape conversion can be achieved with high fidelity. For examples, photons with an exponentially decaying profile can be shaped into a Gaussian profile; by tuning the relative time delays of input photons, Gaussian-shaped photons can be transformed into exponentially decaying or rising profiles through the same metasurface. The proposed mechanism provides a compact way for solving the temporal shape mismatch issues in quantum networks, facilitating the realization of high-fidelity on-chip quantum information processing.
BibTeX
@misc{tian2025conversion,
  author = {Zhaohua Tian and Qi Liu and Yu Tian and Ying Gu},
  title = {{Conversion of photon temporal shape using single gradient metasurface}},
  year = {2025},
  eprint = {2503.17134},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2503.17134},
  howpublished = {arXiv},
}
Figure