Controllable fabrication of uniform core–shell structured zeolite@SBA-15 composites

Xufang Qian, Junming Du, Bin Li, M. Si, Yisu Yang, Yuanyuan Hu, Guoxing Niu, Yahong Zhang, Hualong Xu, Bo Tu, Yi Tang, Dongyuan ZhaoChemical 2011 · DOI

TL;DR

This paper introduces a novel "ultra-dilute liquid-phase coating strategy" to create uniform core-shell structured zeolite@SBA-15 composites. These materials, featuring zeolite cores and tunable mesoporous silica shells, demonstrate excellent catalytic performance in methanol-to-propylene conversion, offering a promising platform for advanced catalytic applications.

What Problem Does This Paper Address?

The development of advanced catalytic materials often hinges on precisely controlling their nanoscale architecture. Specifically, mesoporous materials with large pores are highly sought after for applications like catalysis, drug delivery, and separations, as they facilitate efficient diffusion of reactants and products. However, creating uniform, well-defined core-shell structures where a microporous zeolite core is encapsulated by a mesoporous silica shell has been a significant challenge. Existing methods often struggle to achieve uniform shell thickness, ordered mesoporosity, and controlled interfaces between the core and shell. This paper aims to address this by developing a method for fabricating uniform zeolite@SBA-15 core-shell composites with tunable shell properties.

Methods

The core innovation presented is an "ultra-dilute liquid-phase coating strategy" in an acidic medium. This method utilizes Pluronic P123 triblock copolymer as a mesostructural template for the SBA-15 silica shell. Key aspects of the methodology include:

  • Ultra-dilute conditions: Low concentrations of TEOS (silica precursor) and P123 were employed to promote controlled growth of the silica shell.
  • Acidic medium: The synthesis was carried out in an acidic environment, which influences the hydrolysis and condensation of TEOS.
  • Zeolite cores: Pre-synthesized HZSM-5 or Silicalite-1 zeolite particles served as the core.
  • Tunable shell thickness: The thickness of the SBA-15 shell was controlled by adjusting the TEOS/zeolite mass ratio and other synthesis parameters.
  • Post-hydrothermal treatment: A novel step of post-hydrothermal treatment at 100 °C was introduced to enhance the regularity of the mesostructure.
  • Characterization techniques: A comprehensive suite of techniques was used to analyze the materials, including:
  • Wide-angle X-ray scattering (WAXS) and Small-angle X-ray scattering (SAXS) for structural analysis.
  • Nitrogen sorption isotherms (BET, NLDFT) for surface area and pore size distribution.
  • Transmission Electron Microscopy (TEM) and Field-Emission Scanning Electron Microscopy (FESEM) for morphology and shell thickness determination.
  • Fourier Transform Infrared (FTIR) spectroscopy for chemical characterization.
  • NH3-temperature-programmed-desorption (NH3-TPD) for acidity measurements.
  • Inductively Coupled Plasma Atomic Emission Spectroscopy (ICP-AES) for elemental analysis.

Datasets

Not discussed in the paper. The paper focuses on the synthesis and characterization of novel materials.

Key Insights and Ideas

  • Controlled Mesopore Formation: The ultra-dilute conditions and acidic medium are crucial for forming ordered, fingerprint-like mesoporous silica shells with tunable thicknesses. This suggests a surface-induced micellization and controlled growth mechanism.
  • Crystal Face-Dependent Shell Growth: The shell thickness is not uniform across the entire zeolite crystal but is dependent on the specific crystal faces, indicating an anisotropic growth process. This offers a sophisticated level of control over the composite's architecture.
  • Improved Mesostructural Regularity: The novel post-hydrothermal treatment step significantly improves the regularity of the mesoporous silica shells, leading to better pore structures.
  • Synergistic Catalytic Performance: The core-shell HZSM-5@SBA-15 (HZ@S15) catalyst exhibits superior performance in the methanol-to-propylene (MTP) reaction compared to pure HZSM-5 or a physical mixture, highlighting the benefits of integrating microporous and mesoporous materials in a well-defined architecture.

Key Results

  • Uniform Core-Shell Structures: The developed method successfully produced uniform core-shell composites with zeolite cores and SBA-15 shells.
  • Tunable Shell Thickness: Shell thicknesses could be controlled in the range of 30–45 nm on some crystal faces and 40–120 nm on others.
  • High Surface Area and Large Pores: The composites possessed tunable specific surface areas (115–228 m²/g) and large mesopores (~7.0 nm in diameter) with abundant mesotunnels (~3.0 nm).
  • Enhanced Catalytic Activity: The HZ@S15 catalyst achieved high methanol conversion (~98%) and a high propylene-to-ethylene (P/E) ratio (~10.7) in the MTP reaction, outperforming pure HZSM-5 and a mechanical mixture.
  • Influence of Synthesis Parameters: The study systematically investigated the impact of MgSO4 additive, stirring rate, acidity, temperature, and reaction time on the formation of these core-shell structures.

Limitations and Future Work

  • Limitations: While the paper demonstrates excellent control over shell thickness and mesostructure, the precise mechanism of "crystal face-dependent" growth and the exact role of each synthesis parameter could be further elucidated. The paper also mentions that the shell thickness determination has a standard deviation of around 10 nm, indicating some variability.
  • Future Work: The authors propose a scheme for the formation of these core-shell composites, suggesting further investigation into the surface-induced micellization and hydrothermal rearrangement processes. The excellent catalytic performance of the HZ@S15 composite in MTP conversion implies that these core-shell materials could be explored for a broader range of catalytic applications where diffusion limitations are a concern. Further optimization of shell properties and core-shell interfaces could lead to even more advanced catalytic materials.

Summary updated

Abstract

Mesoporous core–shell composites with large-pore silica shells are highly desired for a broad spectrum of applications. We report an ultra-dilute liquid-phase coating strategy in an acidic medium for controllable synthesis of uniform micro/mesoporous core–shell composites zeolite@SBA-15 comprising zeolite cores and mesoporous silica SBA-15 shells using triblock compolymer Plunoric P123 as a template. Structural characterizations show that the core–shell composites possess tunable specific surface areas (115–228 m2 g−1), large pores (∼7.0 nm in diameter) with plenty of mesotunnels (∼3.0 nm) from silica shells, original crystalline zeolite frameworks, and opened junctions between micropores and mesopores. The silica shells have ordered 2-D hexagonal mesopore channels, most of which are annularly parallel (fingerprint-like arrangement) to the anisotropic zeolite faces. The shell-thickness is crystal face-dependent, which could be facilely tuned in the range of 30–45 and 40–120 nm on a pinacoids/dome faces and b pinacoids of a zeolite single-crystal, respectively. Moreover, the synthesis parameters such as MgSO4 additive, stirring rate, acidity, temperature and reaction time show great influences on the formation of uniform core–shell composites. Post-hydrothermal treatment at 100 °C has been for the first time adopted to improve mesostructural regularity of the core–shell composites. A scheme regarding surface-induced micellization and hydrothermal rearrangement of mesostructured silica shells in the coating process is proposed to illustrate the formation of core–shell composites. The core–shell composite HZSM-5@SBA-15 (HZ@S15) was employed as a catalyst for methanol to propylene (MTP) conversion, and shows excellent catalytic performance with high methanol conversion (∼98%) and propylene to ethylene (P/E) ratio (∼10.7) as well as propylene selectivity (∼39%).
BibTeX
@inproceedings{qian2011controllable,
  author = {Xufang Qian and Junming Du and Bin Li and M. Si and Yisu Yang and Yuanyuan Hu and Guoxing Niu and Yahong Zhang and Hualong Xu and Bo Tu and Yi Tang and Dongyuan Zhao},
  title = {{Controllable fabrication of uniform core–shell structured zeolite@SBA-15 composites}},
  booktitle = {Chemical},
  year = {2011},
  doi = {10.1039/c1sc00250c},
}
Figure