Control of Ionic Conductivity by Lithium Distribution in Cubic Oxide Argyrodites Li6+xP1–xSixO5Cl

Alexandra Morscher, Benjamin B. Duff, Guopeng Han, Luke M. Daniels, Yun Dang, Marco Zanella, Manel Sonni, Ahmad Malik, Matthew S. Dyer, Ruiyong Chen, Frédéric Blanc, John B. Claridge, Matthew J. RosseinskyJournal of the American Chemical Society 2022 · DOI

TL;DR

Researchers have developed a new class of oxide argyrodite materials, Li<sub>6+<i>x</i></sub>P<sub>1–<i>x</i></sub>Si<sub><i>x</i></sub>O<sub>5</sub>Cl, that exhibit significantly improved ionic conductivity compared to previous oxide argyrodites. By controlling the distribution of lithium ions within the crystal structure through compositional tuning, they achieved a conductivity of 1.82(1) × 10<sup>-6</sup> S cm<sup>-1</sup>, a three-orders-of-magnitude improvement, while maintaining excellent air and lithium metal stability.

What Problem Does This Paper Address?

Solid-state lithium-ion batteries (ASSBs) offer enhanced safety and performance over traditional liquid electrolyte batteries. However, the development of efficient solid electrolytes has been a major bottleneck. Sulfide argyrodites are known for their high ionic conductivity, but they suffer from poor stability in air and against lithium metal, limiting their practical application. Oxide argyrodites, while more stable, have historically exhibited much lower ionic conductivities, making them unsuitable for many applications. This paper addresses the critical need for stable, high-performance oxide solid electrolytes by exploring the largely uncharted territory of oxide argyrodites and demonstrating a pathway to significantly boost their ionic conductivity.

Methods

The researchers employed a multi-faceted approach to synthesize, characterize, and evaluate their new materials:

  • Solid-state synthesis: High-purity precursors were carefully dried and mixed, then subjected to high-temperature annealing in sealed quartz tubes under an inert atmosphere to produce the Li<sub>6+<i>x</i></sub>P<sub>1–<i>x</i></sub>Si<sub><i>x</i></sub>O<sub>5</sub>Cl solid solutions.
  • Synchrotron X-ray Diffraction (SXRD): High-resolution SXRD was crucial for determining the crystal structures of the synthesized materials at various temperatures and compositions. This technique allowed them to identify the specific lithium ion sites (T5, T5a, T3, and T4) and track structural phase transitions.
  • Rietveld Refinement: This crystallographic analysis technique was used to precisely determine atomic positions, site occupancies, and lattice parameters from the SXRD data, providing detailed insights into the lithium ion distribution.
  • Differential Scanning Calorimetry (DSC): DSC was used to identify and characterize phase transitions, particularly the order-disorder transition observed in Li<sub>7</sub>SiO<sub>5</sub>Cl.
  • AC Impedance Spectroscopy: This technique was employed to measure the ionic conductivity of the synthesized pellets over a range of temperatures.
  • <sup>7</sup>Li Nuclear Magnetic Resonance (NMR) Spectroscopy: Both static and magic angle spinning (MAS) NMR were used to probe lithium ion dynamics, including diffusion pathways and activation energies, providing complementary information to impedance spectroscopy.
  • Electrochemical Testing: Galvanostatic Li plating/stripping experiments were conducted to assess the stability of the solid electrolyte against lithium metal.
  • SEM and EDX: Scanning electron microscopy and energy-dispersive X-ray spectroscopy were used for microstructural analysis and elemental composition determination.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Unlocking Oxide Argyrodite Potential: The study demonstrates that oxide argyrodites, previously considered low-conductivity materials, can achieve significant ionic conductivity through careful control of lithium ion distribution.
  • Lithium Site Engineering: The identification of four distinct lithium ion sites (T5, T5a, T3, and T4) and the ability to tune their occupancy through aliovalent substitution (Si<sup>4+</sup> with P<sup>5+</sup>) is a key finding. This allows for the creation of novel Li<sup>+</sup> diffusion pathways.
  • Structure-Property Correlation: A direct link was established between the Li<sup>+</sup> distribution within the crystal structure and the resulting ionic conductivity. Specifically, the delocalization of Li<sup>+</sup> ions across multiple sites, particularly the T3 and T4 sites, is crucial for enhanced conductivity.
  • Order-Disorder Transition: The discovery of an order-disorder phase transition in Li<sub>7</sub>SiO<sub>5</sub>Cl at 473 K, mirroring the behavior of superionic sulfide argyrodites, highlights a promising avenue for achieving high conductivity in oxide systems.
  • Compositional Control of Symmetry: The study revealed that the crystal symmetry (P2<sub>1</sub>3 vs. F4̅3m) can be tuned by varying the P/Si ratio, directly impacting Li<sup>+</sup> ordering and conductivity.
  • Superior Stability: The developed oxide argyrodites exhibit significantly better atmospheric stability and are stable against lithium metal, addressing major limitations of their sulfide counterparts.

Key Results

  • New Oxide Argyrodite: The synthesis and characterization of Li<sub>7</sub>SiO<sub>5</sub>Cl, a new cubic Li-rich oxide argyrodite with an ordered P2<sub>1</sub>3 structure at room temperature.
  • Solid Solution: The creation of a Li<sub>6+<i>x</i></sub>P<sub>1–<i>x</i></sub>Si<sub><i>x</i></sub>O<sub>5</sub>Cl solid solution that stabilizes a disordered F4̅3m structure down to room temperature for compositions with 0.3 < <i>x</i> < 0.85.
  • Maximum Ionic Conductivity: A peak ionic conductivity of 1.82(1) × 10<sup>-6</sup> S cm<sup>-1</sup> was achieved at 303 K for Li<sub>6.75</sub>P<sub>0.25</sub>Si<sub>0.75</sub>O<sub>5</sub>Cl (<i>x</i> = 0.75), which is three orders of magnitude higher than previously reported oxide argyrodites.
  • Activation Energy: The highest conducting sample exhibited a low activation energy of 0.522(5) eV, the lowest reported for an oxide argyrodite.
  • Air Stability: The oxide argyrodites demonstrated superior stability in air compared to sulfide argyrodites, with minimal decomposition observed after 60 hours.
  • Lithium Metal Compatibility: The materials were found to be stable against lithium metal.

Limitations and Future Work

  • Conductivity Still Lower than Sulfides: While a significant improvement for oxide argyrodites, the achieved conductivity (1.82 × 10<sup>-6</sup> S cm<sup>-1</sup>) is still lower than that of the best sulfide argyrodites (which can reach 10<sup>-2</sup> S cm<sup>-1</sup>).
  • Impurity Phases: For higher Si content (<i>x</i> = 0.9 and 1), it was challenging to obtain phase-pure materials, with noticeable amounts of Li<sub>4</sub>SiO<sub>4</sub> and Li<sub>6</sub>SiO<sub>4</sub>Cl<sub>2</sub> impurities.
  • Future Work: The authors emphasize that the heterovalent cation substitution explored here represents only a fraction of the potential chemical space within oxide argyrodites. Further research into tuning anion sublattice disorder and exploring other cation substitutions could lead to even higher transport properties, making this a promising area for future solid-state electrolyte development.

Summary updated

Abstract

Argyrodite is a key structure type for ion-transporting materials. Oxide argyrodites are largely unexplored despite sulfide argyrodites being a leading family of solid-state lithium-ion conductors, in which the control of lithium distribution over a wide range of available sites strongly influences the conductivity. We present a new cubic Li-rich (>6 Li<sup>+</sup> per formula unit) oxide argyrodite Li<sub>7</sub>SiO<sub>5</sub>Cl that crystallizes with an ordered cubic (<i>P</i>2<sub>1</sub>3) structure at room temperature, undergoing a transition at 473 K to a Li<sup>+</sup> site disordered <i>F</i>4̅3<i>m</i> structure, consistent with the symmetry adopted by superionic sulfide argyrodites. Four different Li<sup>+</sup> sites are occupied in Li<sub>7</sub>SiO<sub>5</sub>Cl (T5, T5a, T3, and T4), the combination of which is previously unreported for Li-containing argyrodites. The disordered <i>F</i>4̅3<i>m</i> structure is stabilized to room temperature via substitution of Si<sup>4+</sup> with P<sup>5+</sup> in Li<sub>6+<i>x</i></sub>P<sub>1-<i>x</i></sub>Si<sub><i>x</i></sub>O<sub>5</sub>Cl (0.3 < <i>x</i> < 0.85) solid solution. The resulting delocalization of Li<sup>+</sup> sites leads to a maximum ionic conductivity of 1.82(1) × 10<sup>-6</sup> S cm<sup>-1</sup> at <i>x</i> = 0.75, which is 3 orders of magnitude higher than the conductivities reported previously for oxide argyrodites. The variation of ionic conductivity with composition in Li<sub>6+<i>x</i></sub>P<sub>1-<i>x</i></sub>Si<sub><i>x</i></sub>O<sub>5</sub>Cl is directly connected to structural changes occurring within the Li<sup>+</sup> sublattice. These materials present superior atmospheric stability over analogous sulfide argyrodites and are stable against Li metal. The ability to control the ionic conductivity through structure and composition emphasizes the advances that can be made with further research in the open field of oxide argyrodites.
BibTeX
@article{morscher2022control,
  author = {Alexandra Morscher and Benjamin B. Duff and Guopeng Han and Luke M. Daniels and Yun Dang and Marco Zanella and Manel Sonni and Ahmad Malik and Matthew S. Dyer and Ruiyong Chen and Frédéric Blanc and John B. Claridge and Matthew J. Rosseinsky},
  title = {{Control of Ionic Conductivity by Lithium Distribution in Cubic Oxide Argyrodites Li<sub>6+<i>x</i></sub>P<sub>1–<i>x</i></sub>Si<sub><i>x</i></sub>O<sub>5</sub>Cl}},
  journal = {Journal of the American Chemical Society},
  year = {2022},
  doi = {10.1021/jacs.2c09863},
}
Figure