Abstract
Flash Joule heating (FJH) is an emerging and profitable technology for converting inexhaustible biomass into flash graphene (FG). However, producing biomass FG continuously and reducing the high carbon footprint associated with pyrolytic volatiles and carbon black additives remain significant challenges. This study introduces an integrated automatic system utilizing a "pyrolysis-FJH nexus" to achieve continuous, low-carbon biomass FG production. By first converting biomass to biochar via pyrolysis, the system eliminates the need for conductive additives and reduces carbon emissions by ~86.1% (1.9 g CO₂-eq g⁻¹ graphene) compared to traditional biomass-based FJH methods.
Introduction
Flash Joule Heating (FJH) has emerged as a rapid synthesis method for graphene, using high-voltage pulses to transform carbon sources into few-layered graphene in seconds. Despite its speed, industrial scaling has been hindered by manual batch processing and the environmental cost of processing raw biomass. Raw biomass typically requires significant energy to expel pyrolytic volatiles and often necessitates the addition of energy-intensive carbon black to initiate electrical conductivity. This research addresses these bottlenecks through mechanical automation and a novel energy-allocation strategy.
Integrated Automated System
The researchers developed a third-generation FJH device governed by a Programmable Logic Controller (PLC). This system automates the turnover of biomass FG production, utilizing robotic arms for loading and unloading reaction tubes. An imputation algorithm ensures precision in mechanical handling, allowing for a continuous workflow that significantly outpaces manual laboratory setups.
The Pyrolysis-FJH Nexus
A key innovation is the "pyrolysis-FJH nexus," which splits the process into distinct energy-requirement stages. Instead of flashing raw biomass directly, the material undergoes low-energy pyrolysis to create biochar. Biochar produced at 750°C possesses a "Goldilocks" resistance—conductive enough to start the FJH reaction without additives, yet resistive enough for efficient heating.
This pre-treatment allows the subsequent FJH pulses—alternating current (AC) for initial graphitization and direct current (DC) for structural optimization—to focus energy on refining the graphene lattice rather than boiling off gases.
Results and Performance
The automated system achieved a production rate of 21.6 g/h, a substantial improvement over previous manual generations. Life Cycle Assessment (LCA) revealed that the biochar-based process emits only 1.9 g CO₂-eq per gram of graphene. The resulting sawdust-derived FG maintained high quality, with ~97.3% carbon purity and excellent performance in water treatment applications, such as achieving ~93.3% bromate removal.
Conclusion and Future Outlook
The integration of automation with the pyrolysis-FJH nexus provides a viable pathway for the industrial-scale, sustainable production of biomass flash graphene. While the pilot scale is successful, future work will focus on refining the system for high-impurity biomass sources like rice straw and scaling the electrical infrastructure to meet industrial demands. Pairing the system with 100% renewable electricity could further push the process toward true carbon neutrality.
Summary updated