Construction of STM Aligned Electron Field Emission Source

Jeong Young Park, Heechol Choi, Youngsun Lee, Seokho Kang, Kwang‐Hoon Chun, S. W. Park, Young KukJournal de Physique IV (Proceedings) 1996 · DOI

TL;DR

This paper presents the construction of a Scanning Tunneling Microscope (STM) aligned field emission (SAFE) electron source using micro-fabricated electrostatic lenses. This miniaturized system achieves high brightness and a small beam diameter (≈ 0.1 µm), paving the way for high-resolution electron beam lithography and scanning electron microscopy.

What Problem Does This Paper Address?

The miniaturization of electron beam columns offers significant advantages, including improved brightness and reduced aberrations. However, fabricating such small electrostatic lenses with high precision has been a major challenge. Conventional methods struggle to achieve the required sub-micron feature sizes. This paper addresses this by leveraging silicon micro-fabrication techniques to create highly integrated, miniaturized electrostatic lenses for an electron beam system, aiming to overcome the limitations of larger, conventional systems.

Methods

The core innovation lies in the micro-fabrication of electrostatic lenses using silicon processing techniques. The authors detail a multi-step process involving thermal oxidation, silicon nitride deposition, aluminum deposition, and APCVD oxide etching to create lenses with hole diameters as small as 5 µm for the extractor and 100 µm for the einzel lens. Direct electron beam lithography was employed for precise patterning of lens features. For assembly, anodic bonding with drilled slide glasses was used, and a self-assembly technique with an "assembly key" was developed to ensure accurate alignment and avoid resolution loss due to misalignment. The system integrates a W(111) field emitter tip on a piezoelectric ceramic tube for scanning, a beam dump, a quadrupole deflector, and an einzel lens. STM feedback electronics are used to regulate emission current, and a channeltron or channel plate is used for beam detection. A 127° electrostatic energy analyzer is also incorporated for aberration measurements.

Datasets

Not discussed in the paper.

Key Insights and Ideas

  • Micro-fabrication for Miniaturization: The paper demonstrates that advanced silicon micro-fabrication techniques are crucial for creating the sub-micron features required for high-performance electron beam systems.
  • Self-Assembly for Precision: The development of a self-assembly technique for the microlenses is a key insight, as it addresses the critical challenge of precise alignment, which is a major source of aberration in such systems.
  • High Brightness Potential: By miniaturizing the lenses and using a field emission source, the system achieves significantly higher brightness compared to conventional thermal electron sources.
  • STM Integration for Stability: Integrating STM feedback for emission current regulation is shown to be effective in compensating for slow variations, contributing to overall system stability.

Key Results

The constructed STM aligned field emission electron beam system produces an electron beam with:

  • Energy: 0.2 - 2 kV
  • Beam current: up to 10 nA
  • Beam size: ≤ 0.1 µm

The transparency through the whole column was measured to be around 10³ - 10⁴, depending on the alignment. The authors believe that the performance of self-aligned microcolumns can be greatly improved. The aberration of the system is primarily determined by the alignment of the microlenses.

Limitations and Future Work

The authors acknowledge that the aberration of the system is mainly determined by the alignment of the microlenses. While they have developed a self-assembly technique to mitigate this, further improvements in alignment precision are implied. Future work could focus on optimizing the alignment process and exploring even smaller feature sizes for enhanced resolution. The paper also suggests that Schottky emission could further improve the stability and energy resolution of the emitter source.

Summary updated

Abstract

We constructed a scanning tunneling microscope aligned field emission (SAFE) source by using silicon micro-fabricated electrostatic lenses. The system consists of an STM aligned field emitter, 5µm extractor, 100µm accelerator, beam dump, quadrupole deflector and einzel lens. The microlenses were made by using silicon processing techniques. The system can be operated from 200 to 2 kV, resulting in a beam current of tens of nA and with the diameter of ≈ 0.1 µm when a sample was placed less than 2 mm away from the exiting einzel lens. In order to measure the spherical and chromatic aberrations, a detector and cylindrical electron energy analyzer were attached to the micro-column.
BibTeX
@article{park1996construction,
  author = {Jeong Young Park and Heechol Choi and Youngsun Lee and Seokho Kang and Kwang‐Hoon Chun and S. W. Park and Young Kuk},
  title = {{Construction of STM Aligned Electron Field Emission Source}},
  journal = {Journal de Physique IV (Proceedings)},
  year = {1996},
  doi = {10.1051/jp4:1996546},
}
Figure