Abstract
The chlor-alkali industry faces high energy consumption, competition between the chlorine evolution reaction (CER) and oxygen evolution reaction (OER), and challenges such as high costs and poor stability of precious metal catalysts in chlorine production. At the same time, the treatment of antibiotic pollution urgently requires efficient degradation technologies. In this study, a non-precious metal anode of $CuCo_2S_4$ (CCS/Ti) with a nanosheet structure was constructed on a foam titanium substrate using a hydrothermal method, achieving dual-functional applications for efficient chlorine evolution and the degradation of ofloxacin (OFX). The electrode exhibits an overpotential of 1.23 V (vs. Ag/AgCl) at a current density of 100 $mA \cdot cm^{-2}$, with a Faradaic efficiency of 95.66%, and remains stable for 180 h. DFT calculations indicate that the chlorine evolution mechanism on the CCS/Ti electrode primarily follows the Volmer-Heyrovsky pathway. Furthermore, the CCS/Ti electrode achieves a degradation efficiency of 91.34% for OFX within 5 min and demonstrates broad-spectrum degradation capabilities for various fluoroquinolone antibiotics (>83.05%). This study provides an efficient and cost-effective new approach for catalyst material design, contributing to the greening of the chlor-alkali industry and the treatment of refractory pollutants.
Introduction
The chlor-alkali industry is a foundational pillar of modern chemical manufacturing, producing chlorine essential for plastics, disinfectants, and water treatment. However, this industry is notoriously energy-intensive, consuming approximately 150 TWh of electricity annually. Current industrial standards rely on Dimensionally Stable Anodes (DSAs) composed of precious metals like Ruthenium (Ru) and Iridium (Ir). While effective, these materials are expensive, susceptible to corrosion in acidic environments, and often lack the selectivity required to prevent the competing oxygen evolution reaction (OER).
Parallel to these industrial challenges is the growing environmental crisis of antibiotic pollution. Fluoroquinolone antibiotics, such as Ofloxacin (OFX), are persistent organic pollutants that resist conventional wastewater treatment. This research presents a synergistic solution: a noble-metal-free catalyst that optimizes chlorine evolution while simultaneously utilizing the resulting reactive species to degrade hazardous antibiotics.
Experimental Methodology
Researchers developed a high-performance anode by growing $CuCo_2S_4$ (CCS) nanosheets directly onto a porous titanium (Ti) foam substrate using a one-step hydrothermal method. This nanoarray structure provides a high surface area, maximizing the exposure of active sites for electrochemical reactions.
The material's efficacy was evaluated through a combination of experimental characterization and theoretical modeling:
- Structural Characterization: Scanning Electron Microscopy (SEM) and Transmission Electron Microscopy (TEM) were used to visualize the nanosheet morphology, while X-ray Photoelectron Spectroscopy (XPS) tracked the oxidation states of Copper and Cobalt during the reaction.
- Electrochemical Performance: Linear Sweep Voltammetry (LSV) and Tafel slope analysis were employed to determine reaction kinetics and overpotentials.
- Theoretical Insights: Density Functional Theory (DFT) simulations modeled the interaction between chloride ions ($Cl^-$) and the catalyst surface to identify the primary active sites and reaction pathways.
Results and Discussion
The $CuCo_2S_4$ (CCS/Ti) electrode demonstrated exceptional performance in both chlorine evolution and pollutant degradation. At a current density of 100 $mA \cdot cm^{-2}$, the electrode achieved an overpotential of just 1.23 V (vs. Ag/AgCl), significantly outperforming traditional DSAs. Furthermore, the electrode maintained a high Faradaic efficiency of 95.66% and exhibited remarkable durability, remaining stable for 180 hours of continuous operation.
DFT calculations revealed that Cobalt (Co) serves as the primary active site due to its strong binding affinity for chloride ions and high density of states near the Fermi level. The reaction was confirmed to follow the Volmer–Heyrovsky pathway, which is the most thermodynamically favorable mechanism on this surface. XPS data further suggested that $Cu^{2+}/Cu^+$ and $Co^{3+}/Co^{2+}$ redox couples work synergistically to optimize reactant adsorption.
In terms of environmental application, the CCS/Ti anode achieved a 91.34% degradation rate for Ofloxacin (OFX) within just 5 minutes. This rapid degradation is driven by the reactive chlorine species (such as $HClO$) generated during the CER. The system also demonstrated broad-spectrum efficacy, removing over 83% of various other fluoroquinolones, including Ciprofloxacin (CIP) and Norfloxacin (NFX).
Conclusion and Future Outlook
This study successfully demonstrates that noble-metal-free $CuCo_2S_4$ nanoarrays can match or exceed the performance of traditional precious metal catalysts. By integrating industrial chlorine production with wastewater treatment, this "waste-to-treat-waste" approach offers a sustainable path forward for the chlor-alkali industry.
Future research should focus on testing these electrodes within complex industrial brine matrices and investigating the long-term toxicity of degradation by-products. Additionally, scaling the hydrothermal synthesis process for industrial-sized electrodes remains a key engineering milestone for the widespread adoption of this technology.
Summary updated