Confined elasticae and the buckling of cylindrical shells

Stephan WojtowytschAdvances 2020 · DOI · arXiv

Abstract

For curves of prescribed length embedded into the unit disk in two dimensions, we obtain scaling results for the minimal elastic energy as the length just exceeds $2\pi$ and in the large length limit. In the small excess length case, we prove convergence to a fourth-order obstacle-type problem with integral constraint on the real line which we then solve. From the solution, we obtain the energy expansion $2\pi + \Theta \delta^{1/3} + o(\delta^{1/3})$ when a curve has length $2\pi + \delta$ and determine first order coefficient $\Theta \approx 37$. We present an application of the scaling result to buckling in two-layer cylindrical shells where we can determine an explicit bifurcation point between compression and buckling in terms of universal constants and material parameters scaling with the thickness of the inner shell.

Introduction

The study of elastic curves, or elasticae, has a long history in variational calculus, dating back to the work of Euler and Bernoulli. A fundamental problem in this field is the behavior of such curves under geometric constraints. This paper investigates the confined elastica problem: determining the configuration that minimizes the bending energy of a curve with a fixed length $L$ that is constrained to lie within a unit disk in $\mathbb{R}^2$.

When the length $L$ is exactly $2\pi$, the curve fits perfectly as the unit circle, which is the global minimizer of the bending energy functional $W(\gamma) = \int \kappa^2 ds$. However, as the length increases to $L = 2\pi + \delta$ for small $\delta > 0$, the curve is forced to deviate from the boundary to accommodate the excess length. This transition triggers a buckling phenomenon that is mathematically modeled as a higher-order obstacle problem.

Mathematical Framework and Linearization

The core challenge of the confined elastica problem lies in its non-linearity and the presence of a rigid boundary constraint. To analyze the small excess length regime, the research employs a linearization technique. By mapping the circular boundary to a flat line, the geometric problem is transformed into a fourth-order obstacle problem on the real line.

In this linearized setting, the radial displacement of the curve from the boundary is represented by a function $u(x)$. The bending energy is approximated by the $L^2$-norm of the second derivative, $\int (u'')^2 dx$, subject to the constraint that $u \geq 0$ (staying inside the disk) and an integral constraint $\int (u')^2 dx \approx \delta$ representing the excess length. The resulting Euler-Lagrange equation is a non-homogeneous linear fourth-order ordinary differential equation (ODE) that describes the exact shape of the "bump" that minimizes energy.

The 1/3 Power Law and Universal Scaling

One of the primary contributions of this work is the discovery of a specific scaling law for the minimal energy. In two dimensions, the energy does not grow linearly with the extra length $\delta$. Instead, the analysis reveals a $1/3$ power law:

$$W(\gamma) = 2\pi + \Theta \delta^{1/3} + o(\delta^{1/3})$$

The coefficient $\Theta$ is a universal constant calculated to be approximately $36.69$. This sub-linear growth (relative to $\delta$) indicates that the energy cost for adding length is initially very high. Physically, this corresponds to the curve forming a single, sharp, localized "bump" to absorb the extra length. The author proves that the optimal shape is indeed a single symmetric bump that is compactly supported, meaning it maintains contact with the boundary circle everywhere except for one specific segment.

Application to Cylindrical Shell Buckling

The theoretical results for confined elasticae find a direct application in structural engineering, specifically in the buckling of two-layer cylindrical shells. Consider an industrial pipe where a thin inner liner is fitted inside a rigid outer casing. Under thermal expansion or mechanical stress, the inner shell may experience compression.

The system faces a competition between two energy states:

  1. Uniform Compression: The shell remains in contact with the outer casing but compresses its material, costing elastic energy.
  2. Buckling: The shell detaches from the casing and bends inward, costing bending energy but relieving compressive stress.

Using the derived energy expansion, the paper provides an explicit formula for the critical excess length $\delta_{crit}$ at which buckling becomes energetically favorable. This bifurcation point is determined by universal constants, the shell's thickness ($h$), the radius ($r_o$), and material parameters. This provides a rigorous mathematical foundation for predicting failure modes in layered cylindrical structures.

Dimensionality and Large Length Limits

The paper further explores how the problem changes with dimensionality and length scales.

  • Dimensionality Matters: The $1/3$ power law is a distinct feature of 2D confinement. If the curve is allowed to move in three dimensions, it can "twist" out of the plane. The author demonstrates that in 3D, the energy scales linearly with $\delta$, as the curve can accommodate excess length through torsion rather than high-curvature bending.
  • Large Length Limit: For very long curves ($L \gg 1$), the energy behavior shifts. While the total energy scales linearly with $L$, the "excess" energy—the difference between the bending energy and the length—scales as $\sqrt{L}$.

Conclusion and Future Directions

This study provides a rigorous asymptotic analysis of the confined elastica problem, bridging the gap between abstract variational calculus and practical structural mechanics. While the small and large length regimes are well-characterized, the behavior at intermediate lengths remains an open area for research. Future work may also involve extending the simplified 1D profile model used for shell buckling to a full 3D elasticity treatment to capture more complex deformation patterns.

Summary updated

Abstract

Abstract For curves of prescribed length embedded into the unit disk in two dimensions, we obtain scaling results for the minimal elastic energy as the length just exceeds <m:math xmlns:m="http://www.w3.org/1998/Math/MathML"> <m:mrow> <m:mn>2</m:mn> <m:mo>⁢</m:mo> <m:mi>π</m:mi> </m:mrow> </m:math> {2\pi} and in the large length limit. In the small excess length case, we prove convergence to a fourth-order obstacle-type problem with integral constraint on the real line which we then solve. From the solution, we obtain the energy expansion <m:math xmlns:m="http://www.w3.org/1998/Math/MathML"> <m:mrow> <m:mrow> <m:mn>2</m:mn> <m:mo>⁢</m:mo> <m:mi>π</m:mi> </m:mrow> <m:mo>+</m:mo> <m:mrow> <m:mi mathvariant="normal">Θ</m:mi> <m:mo>⁢</m:mo> <m:msup> <m:mi>δ</m:mi> <m:mfrac> <m:mn>1</m:mn> <m:mn>3</m:mn> </m:mfrac> </m:msup> </m:mrow> <m:mo>+</m:mo> <m:mrow> <m:mi>o</m:mi> <m:mo>⁢</m:mo> <m:mrow> <m:mo stretchy="false">(</m:mo> <m:msup> <m:mi>δ</m:mi> <m:mfrac> <m:mn>1</m:mn> <m:mn>3</m:mn> </m:mfrac> </m:msup> <m:mo stretchy="false">)</m:mo> </m:mrow> </m:mrow> </m:mrow> </m:math> {2\pi+\Theta\delta^{\frac{1}{3}}+o(\delta^{\frac{1}{3}})} when a curve has length <m:math xmlns:m="http://www.w3.org/1998/Math/MathML"> <m:mrow> <m:mrow> <m:mn>2</m:mn> <m:mo>⁢</m:mo> <m:mi>π</m:mi> </m:mrow> <m:mo>+</m:mo> <m:mi>δ</m:mi> </m:mrow> </m:math> {2\pi+\delta} and determine first order coefficient <m:math xmlns:m="http://www.w3.org/1998/Math/MathML"> <m:mrow> <m:mi mathvariant="normal">Θ</m:mi> <m:mo>≈</m:mo> <m:mn>37</m:mn> </m:mrow> </m:math> {\Theta\approx 37} . We present an application of the scaling result to buckling in two-layer cylindrical shells where we can determine an explicit bifurcation point between compression and buckling in terms of universal constants and material parameters scaling with the thickness of the inner shell.
BibTeX
@inproceedings{wojtowytsch2020confined,
  author = {Stephan Wojtowytsch},
  title = {{Confined elasticae and the buckling of cylindrical shells}},
  booktitle = {Advances},
  year = {2020},
  doi = {10.1515/acv-2019-0033},
}
Figure