Comprehensive Study on Viscosity-Increasing and Oil Displacement Characteristics of Functional Polymer

Jingang He, Xian'gao Jin, Xiaoying Liu, Lin Yuan, Ruina Liu, Sian Chen, Hao Wu, Wei Yang, Jingyu Wang, Zhang Hai-xiang, Xizhong An, Meng Fan, Bicheng GanProcesses 2025 · DOI

TL;DR

This study investigates the enhanced oil recovery (EOR) potential of functional polymers (salt-resistant polymers and polymeric surfactants) compared to conventional polymers. The findings demonstrate that these advanced polymers exhibit superior viscosity enhancement, better reservoir compatibility, and ultimately lead to significantly improved oil displacement efficiency, addressing the limitations of traditional polymer flooding in challenging reservoir conditions.

What Problem Does This Paper Address?

Conventional polymer flooding, primarily using anionic partially hydrolyzed polyacrylamide (HPAM), has been a cornerstone of enhanced oil recovery (EOR) for decades, significantly increasing oil recovery rates. However, with the shift towards developing more challenging reservoirs (Class II and III) and the increasing prevalence of high salinity and complex geological structures, conventional polymers are proving insufficient. Their limitations include poor salt resistance and an inability to effectively adapt to reservoir heterogeneity. This necessitates the development of advanced functional polymers that can overcome these challenges and further boost oil recovery in these demanding environments.

Methods

The researchers employed a multi-faceted experimental approach to compare functional polymers (specifically, salt-resistant polymers and polymeric surfactants) with conventional polymers:

  • Emulsification Experiments: Assessed the ability of polymers to form and stabilize emulsions with crude oil, a key factor in mobilizing trapped oil.
  • Hydrodynamic Characteristic Size and Reservoir Compatibility: Measured the effective size of polymer molecules in solution and evaluated their ability to navigate reservoir pore structures using a microporous membrane method. This helps understand how well polymers can pass through the reservoir without excessive retention or plugging.
  • Polymer Retention Experiments in Porous Media: Quantified how much polymer is adsorbed or retained within the reservoir rock using Nuclear Magnetic Resonance (NMR) techniques. High retention can lead to increased pressure drop and reduced sweep efficiency.
  • Core Flooding Experiments: Simulated the injection of polymer solutions into actual reservoir rock samples (cores) under reservoir conditions (temperature, pressure) to directly measure their oil displacement performance, including recovery factor and pressure behavior.
  • Rheological Measurements: Characterized the viscosity of polymer solutions at various concentrations and conditions to understand their thickening mechanisms.
  • Molecular Structure Analysis: Examined the chemical structures of the polymers to correlate their composition with their performance.

Datasets

The study utilized:

  • Field Water Samples: Clear water, deep sewage, and simulated formation water from Daqing Oilfield, with detailed ion content analysis provided in Table 1.
  • Daqing Crude Oil: Used for emulsification and displacement experiments.
  • Daqing Natural Cores: Three natural core samples were used for experiments.
  • Artificial Cores: Used for some experiments, with specified dimensions and permeability.

No new benchmarks were introduced; the focus was on comparing existing polymer types against functionalized ones using established experimental protocols.

Key Insights and Ideas

  • Multi-Stage Viscosity Enhancement: Functional polymers exhibit a more complex viscosity enhancement mechanism than conventional polymers, involving bulk viscosity, associative viscosity, and crucially, emulsion-induced viscosity enhancement. This multi-stage approach allows for better mobility control.
  • Structural Disparities Lead to Performance Differences: The molecular structures of functional polymers (branched polymers and polymeric surfactants) are fundamentally different from conventional linear polymers, leading to distinct aggregation behaviors and viscosity-enhancing properties.
  • Reservoir Compatibility is Key: The hydrodynamic size of polymers is critical for their transport through reservoir pores. Functional polymers, particularly polymeric surfactants, can form network structures that enhance viscosity even before critical association concentrations are reached, influencing their pore-scale behavior.
  • Functional Polymers Outperform Conventional Ones: Core flooding experiments consistently showed that functional polymers (salt-resistant and polymeric surfactants) achieved significantly higher oil recovery rates compared to ordinary polymers.
  • Emulsification as a Performance Driver: The ability of functional polymers to emulsify crude oil is a significant factor in their enhanced oil displacement performance, contributing to increased viscosity and better oil mobilization.

Key Results

  • Viscosity Enhancement: At a concentration of 1200 mg/L, polymer surfactants and salt-resistant polymers showed approximately three times the apparent viscosity of ordinary polymers.
  • Emulsification Performance: Ordinary polymers showed no emulsifying ability, while salt-resistant polymers and polymeric surfactants demonstrated significant emulsifying capabilities, with water separation rates of 92% and 100% respectively over 24 hours.
  • Viscosity Increase Post-Emulsification: The viscosity of salt-resistant polymer and polymer surfactant solutions increased dramatically after emulsification with oil. For instance, the viscosity of a salt-resistant polymer emulsion increased by 659% at 50% water content.
  • Polymer Retention: Polymer surfactant showed significantly higher retention in porous media (0.276 mg/mL) compared to salt-resistant polymer (0.232 mg/mL) and ordinary polymer (0.181 mg/mL), indicating higher seepage resistance.
  • Oil Displacement Efficiency: In core flooding experiments, salt-resistant polymers achieved a recovery rate 1.2 times that of ordinary polymers, while polymer surfactants achieved 1.3 times the recovery rate.

Limitations and Future Work

  • Optimal Balance is Crucial: The effectiveness of functional polymers is highly dependent on achieving an optimal balance between their association degree and reservoir heterogeneity. Mismatches can lead to poor performance, even with high injection pressures.
  • Viscosity vs. Effectiveness: While viscosity is an important property, it doesn't directly correlate with the overall effectiveness of polymer flooding. Reservoir adaptability and molecular aggregate compatibility are more critical factors.
  • Future Work Suggestions: The paper implicitly suggests that further research should focus on designing functional polymers with tailored hydrophobic groups to optimize compatibility with various reservoir heterogeneities. Understanding and controlling the intermolecular association of these polymers will be key to maximizing their application in EOR. The study also highlights the need for careful consideration of polymer solution properties in relation to reservoir characteristics for optimal oil displacement.

Summary updated

Abstract

Polymer flooding is one of the critical methods for enhancing oil recovery (EOR) in domestic and international oilfields. Since the large-scale implementation of industrial polymer flooding in Daqing Oilfield in 1996, the overall recovery rate has increased by over 10%. With the advancement of chemical flooding technologies, conventional polymer flooding can no longer meet the practical demands of oilfield development. This study focuses on functional polymers, such as salt-resistant polymers and polymeric surfactants, tailored for Class II and III reservoirs in Daqing Oilfield. A series of experiments, including emulsification experiments, hydrodynamic characteristic size-reservoir compatibility comparison experiments, polymer retention experiments in porous media, and core flooding experiments, were conducted to investigate the differences between functional polymers and conventional polymers in terms of intrinsic properties and application performance. Comparative analyses of molecular chemical structures and micro-aggregation morphologies between functional polymers (branched polymers and polymeric surfactants) and conventional polymers revealed structural composition disparities and distinct viscosity-enhancing properties. From the perspective of aqueous solution viscosity enhancement mechanisms, functional polymers exhibit a three-stage viscosity-enhancing mechanism: bulk viscosity, associative viscosity, and emulsion-induced viscosity enhancement. The hydrodynamic characteristic sizes of polymers were analyzed to evaluate their compatibility with reservoir pore structures, and the seepage resistance mechanisms of both polymeric surfactants and salt-resistant polymers were identified. Core flooding experiments conclusively demonstrated the superior practical performance of functional polymers over conventional polymers. The application of functional polymers in polymer flooding can effectively enhance oil recovery.
BibTeX
@inproceedings{he2025comprehensive,
  author = {Jingang He and Xian'gao Jin and Xiaoying Liu and Lin Yuan and Ruina Liu and Sian Chen and Hao Wu and Wei Yang and Jingyu Wang and Zhang Hai-xiang and Xizhong An and Meng Fan and Bicheng Gan},
  title = {{Comprehensive Study on Viscosity-Increasing and Oil Displacement Characteristics of Functional Polymer}},
  booktitle = {Processes},
  year = {2025},
  doi = {10.3390/pr13061859},
}
Figure