Abstract
Woody biomass is a vital renewable resource that can replace petroleum-based feedstocks. Its primary component, lignocellulose, consists of cellulose, hemicellulose, and lignin in a complex, hierarchical structure. Efficiently separating these components and converting them into advanced materials is key to high-value transformation. This review examines the structural and chemical characteristics of each component and summarizes advanced separation strategies—including cellulose-targeted, hemicellulose-first, and lignin-first approaches. These strategies are linked to the development of electromagnetic interference (EMI) shielding materials, where cellulose provides a structural scaffold, and lignin enhances dielectric loss. This framework offers guidance for designing sustainable, high-performance EMI shielding materials.
Introduction: The Challenge of Electromagnetic Pollution
As 5G technology and electronic miniaturization expand, "electromagnetic pollution" has become a significant concern for both device performance and human health. Traditional EMI shields rely on metals like copper or aluminum, which are effective but suffer from high density, high cost, and susceptibility to corrosion.
Woody biomass offers a promising sustainable alternative. However, its three main components—cellulose (the structural backbone), hemicellulose (the branched "glue"), and lignin (the aromatic binder)—are tightly interwoven in a "recalcitrant" hierarchical structure. The challenge lies in separating these components without destroying their functional properties, then reassembling them into architectures that can effectively reflect or absorb electromagnetic waves.
Advanced Separation Strategies
The "separation-to-function" link is critical; the method of separation directly dictates final shielding performance. Recent progress has highlighted several key strategies:
- Cellulose-Targeted Separation: Often involves Ionic Liquids (ILs) for high-efficiency dissolution or Deep Eutectic Solvents (DES) as a green alternative to disrupt hydrogen bond networks.
- Hemicellulose-First: Focuses on extracting hemicellulose before it degrades, though it remains the least utilized component in shielding applications.
- Lignin-First Strategy: Utilizes Reductive Catalytic Fractionation (RCF) to extract lignin while preventing the "condensation" (clumping) that usually ruins its chemical reactivity. Preserving the aromatic skeleton is vital for maximizing dielectric loss in the final shield.
Fabrication and Shielding Mechanisms
Once separated, these components are reassembled into functional architectures like aerogels, films, or carbonized skeletons.
- Structure as Strategy: Wood’s natural hierarchical pores act as "waveguide cavities." When EM waves enter these channels, they undergo multiple internal reflections, significantly increasing the probability of absorption.
- Component Synergies: Cellulose acts as a structural scaffold that prevents the agglomeration of conductive fillers (like MXenes or carbon nanotubes), ensuring a uniform conductive network. Lignin, with its aromatic rings and phenolic groups, facilitates $\pi–\pi$ electron transitions and dipole polarization, converting EM energy into heat.
- Gradient Design: Effective shields often use gradient structures—a highly conductive surface layer and a porous, absorbing base—to minimize surface reflection and "trap" waves inside the material.
Performance Metrics and Key Results
Synthesizing findings from 178 peer-reviewed sources, the paper highlights several record-breaking performances:
- Carbonized Wood: Achieved a reflection loss of -64.1 dB via 3D conductive channels.
- Lignin-Based Aerogels: Ultra-lightweight RGO/lignin-derived carbon aerogels reached a specific shielding efficacy (SSE/t) of 53,250 dB·cm³/g.
- Cellulose/MXene Hybrids: Multilayered films achieved SE values exceeding 90 dB, far surpassing the commercial requirement of 20–30 dB for most electronics.
Future Outlook
Despite progress, hurdles remain. Hemicellulose potential is largely untapped, and the cost of green solvents like Ionic Liquids must decrease for industrial scaling. Additionally, biomass-based shields need better resistance to extreme temperatures and humidity to compete with metals in harsh environments. Future research will likely focus on "all-component" utilization and developing multifunctional shields that combine EMI protection with thermal management or sensing capabilities.
Summary updated