Abstract
Volatile organic compounds (VOCs) are critical components in the generation of secondary organic aerosol (SOA) as well as ozone. In this study, the compositions of VOC emissions from two dyestuff plants were sampled and quantitatively analyzed using SUMMA canister sampling, a pre-concentrator, and GC-MS. Based on the organized emission concentrations, the two plants generated an estimated 443.0 kg a–1 and 667.8 kg a–1 of VOCs, which were dominated by halogenated hydrocarbons. The differences in composition between the plants, plant workshops, and production chains were remarkable. The average removal rate of the VOCs was calculated to be 86.1%, with alkanes and alkenes exhibiting the maximum rate, followed by halogenated hydrocarbons and OVOCs. Our research establishes the characteristics of VOCs—including their EFs, which have hitherto remained unassessed—generated by dyestuff production and offers supporting air quality data for emission inventories of relevant industries as well as policy making.
Introduction
While extensive data exists for VOC emissions from petrochemicals and solvent use, the dyestuff industry—a significant and growing sector—has remained largely uncharacterized. VOCs are critical precursors to ground-level ozone and secondary organic aerosols (SOA), both of which degrade air quality and impact human health. As regulatory frameworks tighten, accurate source profiles and emission factors (EFs) are essential for building reliable emission inventories. This study aims to unmask the chemical "fingerprints" of dyestuff production to inform effective mitigation strategies and regional air chemistry modeling.
Methodology
Researchers conducted a field study at two representative dyestuff plants (Plant A and Plant B) located in an industrial park in China. The study employed a multi-step analytical pipeline:
- Sampling: SUMMA canisters collected both "organized" emissions from exhaust stacks and "unorganized" fugitive gases near reaction equipment.
- Analysis: Samples were processed via a pre-concentrator and analyzed using Gas Chromatography-Mass Spectrometry (GC-MS), following US EPA TO-15 methods.
- Process Mapping: Emissions were mapped to specific production stages, including diazotization, coupling, and post-treatment. Figure 3 illustrates the complex production chains and sampling points for both plants.
- Efficiency Testing: The performance of Regenerative Thermal Oxidizers (RTO) was evaluated to determine removal efficiencies across different chemical classes.
Results and Discussion
VOC Composition and the "Fingerprint" Problem
A key finding of this research is the dominance of halogenated hydrocarbons, which accounted for 47.7% to 63.5% of total emissions. This contrasts with many other industries where alkanes or aromatics are the primary pollutants. The study also revealed significant variability in VOC composition between plants and even between workshops within the same facility.
As shown in Figure 5, the chemical profiles are highly specific to the raw materials and processes used. For instance, high concentrations of isopropyl alcohol, acetone, chloroethane, and dichloromethane were identified, directly correlating with the solvents and reagents employed in synthesis.
Treatment Efficiency and Emission Factors
The average VOC removal rate via RTO was calculated at 86.1%. However, efficiency varied significantly by chemical class: alkanes and alkenes saw a 95.4% removal rate, while some aromatics like methylbenzene were removed at rates as low as 45.6%. A critical observation was that RTO efficiency drops when inlet VOC concentrations are low (under 100 mg/m³), likely due to insufficient residence time for complete destruction.
The study established new EFs for the dyestuff industry. For example, the EF for 1,2,4-trimethylbenzene was 16 g/t in Plant A, while chlorobenzene reached 3.8 g/t in Plant B. Total annual emissions were estimated at 443.0 kg for Plant A and 667.8 kg for Plant B.
Conclusion
This research provides a foundational characterization of VOC emissions and EFs for dyestuff production. The findings highlight that halogenated hydrocarbons are a major concern and that emission profiles are highly process-dependent. While current treatment technologies are generally effective, their performance varies by chemical species and concentration. Refining these emission factors will be crucial for reducing uncertainties in industrial emission inventories and supporting evidence-based policy making.
Summary updated