Comparison of High-Speed Polarization Imaging Methods for Biological Tissues

Xianyu Wu, Mark Pankow, Taka Onuma, Hsiao-Ying Shadow Huang, Kara PetersSensors 2022 · OpenReview

TL;DR

This paper compares two high-speed polarization imaging techniques for observing dynamic deformations in biological tissues. The authors found that a polarization filter array camera offers advantages in eliminating motion blur and temporal bias compared to a rotating polarizer system, especially for highly scattering tissues, though it comes with reduced spatial resolution and calibration challenges.

What Problem Does This Paper Address?

Understanding how biological tissues deform under stress is crucial for fields ranging from biomechanics to medical device design. Traditional methods for observing these dynamic deformations often struggle with capturing rapid changes without introducing artifacts like motion blur or temporal bias. Polarization imaging is a powerful technique for visualizing internal material properties like stress and fiber alignment, but achieving high temporal resolution (fast frame rates) has been a significant challenge. This paper specifically addresses the need for high-speed, artifact-free imaging of biological tissues undergoing large, dynamic deformations, comparing two leading approaches: a rotating polarizer system and a polarization filter array integrated with a camera sensor.

Methods

The study compares two main methods for high-speed polarization imaging:

  • Rotating Polarizer System: This classical approach uses a physical polarizer that rotates in front of the specimen. To capture polarization states, multiple images are acquired at different rotation angles. While this preserves full spatial resolution, it inherently limits temporal resolution because several images are needed per measurement, and rapid changes can lead to temporal bias (phase lag).
  • Polarization Filter Array (PFA) Camera: This method integrates a 2x2 array of polarizing filters directly onto the camera's image sensor. Each pixel in the array captures a different polarization state simultaneously. This allows for much higher temporal resolution as only one image acquisition is needed per measurement. However, it reduces the effective spatial resolution by a factor of four (four pixels are needed to reconstruct one polarization state image).

The researchers applied these methods to two types of specimens: polycarbonate (low scattering) and tendon-to-bone insertion (high scattering) under dynamic tensile loading at up to 7000 frames per second. They analyzed collagen fiber alignment angle and retardation (a measure of alignment strength).

Datasets

Not discussed in the paper. The study uses custom experimental setups and specimens.

Key Insights and Ideas

  • PFA Eliminates Temporal Bias: The PFA camera's ability to capture all polarization states simultaneously eliminates the temporal bias inherent in rotating polarizer systems, which is critical for accurately tracking rapid dynamic events.
  • PFA Reduces Motion Blur: By acquiring all necessary polarization data in a single frame, the PFA method effectively eliminates motion blur that can plague rotating polarizer systems when dealing with fast deformations.
  • Scattering is a Major Challenge: Highly scattering biological tissues, like tendon-to-bone insertions, pose significant challenges for polarization imaging. The PFA method, while still affected, showed promise in handling these materials better than rotating systems due to the elimination of temporal artifacts.
  • Spatial Resolution Trade-off: The PFA method sacrifices spatial resolution by a factor of four compared to the rotating polarizer method. While software solutions exist to mitigate this, they were not implemented in this study's commercial software.
  • Calibration is Crucial (and Tricky): The PFA camera requires careful calibration for each specific sample and lighting condition. The study highlights how different calibration approaches can significantly impact the accuracy of the alignment and retardation maps, especially for scattering tissues.

Key Results

  • The PFA camera successfully captured dynamic deformations in polycarbonate and tendon-to-bone insertion specimens at 7000 fps.
  • For polycarbonate specimens, the PFA results were consistent with previous measurements using a rotating polarizer, demonstrating the removal of temporal bias.
  • For tendon-to-bone insertion specimens, the PFA method provided valuable insights into collagen fiber realignment during dynamic loading, despite the high scattering.
  • The study showed that while the PFA method reduces spatial resolution, its advantages in temporal resolution and artifact reduction outweigh this limitation for many high-speed dynamic applications.
  • The calibration procedure for the PFA camera was found to be critical, with one specific calibration method (using a breather sheet) yielding the best results for scattering tissues.

Limitations and Future Work

  • Reduced Spatial Resolution: The PFA camera inherently reduces spatial resolution by a factor of four. The authors note that software methods exist to potentially recover this resolution, which could be a direction for future work.
  • Calibration Complexity: The need for precise calibration for each sample and lighting condition presents a significant challenge, especially for heterogeneous and scattering biological tissues. Further development in calibration procedures is needed.
  • Alignment Issues: Numerical issues were encountered when alignment angles were near 0°, which could be resolved by adjusting camera alignment. This suggests that precise setup is still critical.
  • Future Work: The authors suggest further development in alignment, image size reduction, and calibration methods for the PFA system. They also imply that the PFA method's advantages make it a promising avenue for future research in dynamic tissue mechanics.

Summary updated

Abstract

We applied a polarization filter array and high-speed camera to the imaging of biological tissues during large, dynamic deformations at 7000 frames per second. The results are compared to previous measurements of similar specimens using a rotating polarizer imaging system. The polarization filter eliminates motion blur and temporal bias from the reconstructed collagen fiber alignment angle and retardation images. The polarization imaging configuration dose pose additional challenges due to the need for calibration of the polarization filter array for a given sample in the same lighting conditions as during the measurement.
BibTeX
@inproceedings{wu2022comparison,
  author = {Xianyu Wu and Mark Pankow and Taka Onuma and Hsiao-Ying Shadow Huang and Kara Peters},
  title = {{Comparison of High-Speed Polarization Imaging Methods for Biological Tissues}},
  booktitle = {Sensors},
  year = {2022},
  url = {https://openreview.net/forum?id=z9b10druYd6},
}
Figure