Compact microstrip lowpass filter with very wide stopband using open stubs loaded with defected front coupled tapers

Mohsen Hayati, Omid Sadeghi Fathabady, Sohrab MajidifarIEICE Electron. Express 2011 · DOI

Introduction

In the landscape of modern wireless communication, the demand for high-performance microwave components continues to grow. Lowpass filters (LPFs) are critical for maintaining signal integrity, serving to suppress unwanted harmonics and high-frequency noise. However, engineers often face a difficult trade-off between three competing requirements: high selectivity, a wide stopband, and a compact physical footprint. This paper presents a novel microstrip LPF design that addresses these challenges through a unique resonator structure utilizing "defected front coupled tapers."

Resonator Design and Methodology

The core of the proposed filter is a symmetric resonator structure consisting of a main transmission line loaded with four open stubs. The primary innovation lies in the termination of these stubs in a tapered geometry. By placing these tapered ends in close proximity to one another—a configuration the authors call "defected front coupled tapers"—the design generates enhanced mutual capacitance. This increased capacitance is instrumental in sharpening the filter's roll-off (selectivity) and extending the rejection range into higher frequencies.

Furthermore, the horizontal and vertical symmetry of the layout increases series inductance, which minimizes signal degradation within the passband. To achieve the final high-performance filter, the researchers cascaded two of these resonator units in series. They further integrated auxiliary triangular resonators and additional open stubs to suppress specific higher-order harmonics. The design process identified three critical dimensions—$L_g$, $L_s$, and $L_m$—that allow for independent tuning of the bandwidth and stopband depth, with $L_m$ specifically noted for its ability to increase rejection without compromising selectivity.

Experimental Results

The design was validated through electromagnetic simulations using ADS Momentum and physical fabrication on an RT/Duroid 5880 substrate. The prototype was tested using an HP8757A network analyzer, demonstrating exceptional performance across several key metrics:

  • Stopband Performance: The filter maintains a rejection level of at least -20 dB across a remarkably wide range of 24.41 GHz. This bandwidth is significantly broader than many contemporary designs.
  • High Selectivity: The transition from the -3 dB passband edge to the -20 dB stopband rejection level occurs within a narrow 0.74 GHz window, indicating a very sharp roll-off characteristic.
  • Passband Integrity: Insertion loss remains below 0.1 dB from DC up to 8.38 GHz, ensuring that the desired signal passes through the filter with negligible attenuation.
  • Miniaturization: Despite its high performance, the filter occupies a compact area of only 12.3 mm x 6.9 mm, making it highly suitable for integration into dense microwave circuits.

Conclusion and Future Work

The integration of defected front coupled tapers provides a versatile mechanism for tuning filter characteristics. While the current study focuses on performance metrics, future work could explore power handling limits and fabrication sensitivity to manufacturing deviations. Nevertheless, this design represents a significant step forward in developing compact, high-selectivity filters for next-generation communication systems, including 5G and satellite technology.

Summary updated

BibTeX
@article{hayati2011compact,
  author = {Mohsen Hayati and Omid Sadeghi Fathabady and Sohrab Majidifar},
  title = {{Compact microstrip lowpass filter with very wide stopband using open stubs loaded with defected front coupled tapers}},
  journal = {IEICE Electron. Express},
  year = {2011},
  doi = {10.1587/elex.8.670},
}
Figure