Cofabrication of Planar Gunn Diode and HEMT on InP Substrate

Vasileios Papageorgiou, Ata Khalid, Chong Li, David R. S. CummingIEEE Transactions on Electron Devices 2014 · DOI

Abstract

We present the cofabrication of planar Gunn diodes and high-electron mobility transistors (HEMTs) on an indium phosphide substrate for the first time. Electron beam lithography has been used extensively for the complete fabrication procedure and a 70-nm T-gate technology was incorporated for the enhancement of the small-signal characteristics of the HEMT. Diodes with anode-to-cathode separation (L <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">ac</sub> ) down to 1and 120-μm width were shown to oscillate up to 204 GHz. The transistor presents a cutoff frequency ( f <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">T</sub> ) of 220 GHz, with power gain up to 330 GHz ( f <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">max</sub> ). The integration of the two devices creates the potential for the realization of high-power, high-frequency MMIC Gunn oscillators, circuits, and systems.
BibTeX
@article{papageorgiou2014cofabrication,
  author = {Vasileios Papageorgiou and Ata Khalid and Chong Li and David R. S. Cumming},
  title = {{Cofabrication of Planar Gunn Diode and HEMT on InP Substrate}},
  journal = {IEEE Transactions on Electron Devices},
  year = {2014},
  doi = {10.1109/ted.2014.2331368},
}

Loading related content...

Figure