TL;DR
This paper tackles the critical issue of coal wall spalling in large mining height working faces, a common problem that compromises mine safety and production efficiency. The researchers developed and tested a novel low-temperature polyurethane composite grouting material and technology, demonstrating its effectiveness in significantly enhancing coal wall stability and reducing spalling through numerical simulations and field trials.
What Problem Does This Paper Address?
Coal mining, especially in large mining height working faces, is prone to coal wall spalling. This phenomenon occurs when the immense pressure from the overlying strata, combined with the inherent weakness of the coal seam and surrounding rock, causes the coal walls to fracture and break away. This spalling not only leads to production stoppages and equipment damage but also poses significant safety risks, including potential roof collapses and even casualties. Existing methods for preventing coal wall spalling often have limitations, such as insufficient support force or environmental concerns. Therefore, there's a pressing need for effective, safe, and efficient reinforcement technologies to mitigate this problem.
Methods
The study employed a multi-faceted approach:
- Theoretical Analysis: The paper begins by analyzing the fundamental mechanisms behind coal wall spalling, considering factors like mining height, geological structure, and roof lithology.
- Numerical Simulation: The researchers utilized FLAC3D 5.0, a finite difference software, to simulate the stress distribution and plastic zone changes in the coal wall before and after grouting. This allowed them to quantitatively assess the impact of the proposed reinforcement technology.
- Novel Material Development: A new low-temperature, two-component polyurethane composite material was developed. This material is designed to have rapid reaction, low polymerization temperature, adjustable setting time, high strength, and environmental friendliness, addressing some of the drawbacks of existing grouting agents.
- Grouting Technology: A specific grouting scheme and equipment were designed and implemented for the working face, including details on hole placement, drilling, injection, and pressure control.
- Field Experimentation: Industrial tests were conducted on the 150505 working face of the Duanwang Mine. On-site monitoring and comparative analysis of spalling before and after grouting were performed to validate the effectiveness of the developed technology.
Datasets
Not discussed in the paper. The study relies on geological data from the Duanwang Mine and laboratory test results for the developed grouting material.
Key Insights and Ideas
- Multi-factorial Spalling: Coal wall spalling in large mining height faces is not due to a single cause but a complex interplay of high mining height, geological structures (faults), weak roof lithology, and intense roof pressure.
- Polyurethane Composite Advantage: The developed low-temperature polyurethane composite offers a promising alternative to traditional grouting materials due to its rapid setting, high strength, and reduced exothermic reaction, which is crucial for preventing coal seam fires.
- Grouting as a Structural Reinforcement: Grouting effectively transforms the fractured coal wall into a more cohesive and stable structure by filling cracks and increasing the overall bearing capacity.
- Numerical Simulation as a Predictive Tool: FLAC3D simulations accurately predicted the stress redistribution and reduction in the plastic zone after grouting, providing strong evidence for the technology's efficacy.
- Field Validation is Crucial: The successful industrial application confirmed that the proposed grouting reinforcement technology significantly reduced coal wall spalling and improved production efficiency.
Key Results
- Reduced Spalling: Field monitoring showed a significant reduction in the number and size of coal wall spalling events after the implementation of the grouting reinforcement.
- Enhanced Stability: Numerical simulations indicated a substantial decrease in the plastic zone width (from 2-5m to 1-3m) and an improvement in the advanced abutment pressure distribution, signifying enhanced coal wall stability.
- Increased Production: The paper reports a 150% increase in labor productivity and a 15% increase in raw coal production due to the continuous operation of the working face without the need for production stoppages for roof maintenance.
- Improved Recovery Rate: The recovery rate increased by 8.9% due to the reduction of coal loss in fault fracture zones.
- Material Properties: The new grouting material exhibited excellent properties, including a curing time of 40-100 seconds, a maximum reaction temperature of 80-90°C, and a bond strength of 4.2 MPa.
Limitations and Future Work
- Limitations: The study focuses on a specific working face (150505) in the Duanwang Mine. While the results are promising, their generalizability to all mining conditions might require further investigation. The paper also mentions that the grouting material is primarily suitable for loose broken coal rock mass, suggesting potential limitations in extremely hard or fractured rock formations.
- Future Work: The authors suggest that this research provides a basis for rib spalling control in similar working faces. Further research could explore optimizing the grouting parameters for different geological conditions, investigating the long-term durability of the grouted material, and potentially developing even more advanced composite materials for enhanced reinforcement. The study also implies that further research into the "nano-composite" aspect of the material could yield further insights.
Summary updated