Citric Acid-Modified Sepiolite as an Efficient and Sustainable Adsorbent for the Removal of Methylene Blue from Aqueous Solutions

Zhuangzhuang Tian, Ziyi Chen, Qing Wang, Xin Gao, Wei WeiWater 2025 · DOI

TL;DR

This paper introduces a novel, eco-friendly adsorbent, citric acid-modified sepiolite (CA-SEP), for efficiently removing methylene blue (MB) dye from wastewater. CA-SEP demonstrates a significant increase in MB adsorption capacity (2.6-fold) compared to unmodified sepiolite, along with excellent reusability and a promising cost-effectiveness, making it a sustainable solution for dye pollution.

What Problem Does This Paper Address?

Industrial wastewater often contains toxic organic dyes, posing significant environmental and health risks. Methylene blue (MB) is a common example, known for its persistence and adverse effects. While various methods exist for dye removal, many are energy-intensive, require substantial chemical inputs, or are prohibitively expensive. Adsorption using low-cost, eco-friendly materials is a promising alternative, but existing clay-based adsorbents often suffer from limited adsorption capacity due to insufficient porosity and surface functional groups. This research aims to overcome these limitations by developing a modified clay adsorbent with enhanced performance and sustainability.

Methods

The researchers synthesized a novel adsorbent, CA-SEP, by impregnating raw sepiolite (SEP) with citric acid (CA). They systematically investigated the effects of different CA concentrations (0.1 M to 1.0 M) on sepiolite modification, selecting 0.5 M CA as optimal. The synthesized materials were characterized using a suite of analytical techniques:

  • X-ray Diffraction (XRD): To analyze crystalline structure and identify mineral phases.
  • Fourier-transform infrared spectroscopy (FTIR): To identify functional groups and confirm chemical modifications.
  • Scanning Electron Microscopy-Energy Dispersive Spectroscopy (SEM-EDS): To examine surface morphology and determine elemental composition.
  • Brunauer-Emmett-Teller (BET) analysis: To measure specific surface area and pore volume.
  • Point of Zero Charge (pHPZC) determination: To understand the surface charge behavior of the adsorbent.

Batch adsorption experiments were conducted to evaluate MB removal efficiency under varying conditions: solution pH (2-10), contact time (5-300 min), adsorbent dosage (0.2-10 g/L), and initial MB concentration (10-150 mg/L) at different temperatures (283, 298, and 313 K). Adsorption kinetics were modeled using pseudo-first-order (PFO), pseudo-second-order (PSO), and Weber-Morris (W-M) models. Adsorption equilibrium data were fitted to Langmuir, Freundlich, and Sips isotherm models. Thermodynamic parameters were calculated to understand the adsorption process. The adsorbent's reusability was assessed over five adsorption-desorption cycles using an ethanol/water mixture. Finally, the CA-SEP adsorbent was tested on real textile wastewater samples.

Datasets

Not applicable. This study involves experimental synthesis and characterization of a novel material and its performance evaluation using synthetic and real wastewater samples. No pre-existing datasets were used for training or evaluation.

Key Insights and Ideas

  • Citric Acid as a Green Modifier: The study highlights citric acid as an effective and eco-friendly modifier for sepiolite, avoiding the environmental drawbacks associated with strong inorganic acids.
  • Functional Groups Over Surface Area: A key finding is that the enhanced adsorption capacity of CA-SEP is primarily attributed to the introduction of oxygen-containing functional groups (from citric acid) rather than an increase in surface area. This suggests a paradigm shift in designing clay-based adsorbents, focusing on chemical modification for active sites.
  • pH-Dependent Adsorption: The adsorption of MB is highly pH-dependent, with optimal removal occurring at pH 8.0, which is slightly above the pHPZC of CA-SEP. This indicates that electrostatic interactions play a crucial role, with the negatively charged CA-SEP surface attracting the positively charged MB cations.
  • Hybrid Adsorption Mechanism: The Sips isotherm model provided the best fit for the equilibrium data, suggesting a hybrid adsorption mechanism that combines aspects of both monolayer adsorption and heterogeneous surface adsorption.
  • Spontaneous and Endothermic Process: Thermodynamic analysis revealed that MB adsorption onto CA-SEP is a spontaneous and endothermic process, with increased spontaneity at higher temperatures.
  • Excellent Reusability: The CA-SEP adsorbent demonstrated remarkable stability, retaining over 80% of its adsorption capacity after five consecutive adsorption-desorption cycles, underscoring its sustainability.

Key Results

  • Enhanced Adsorption Capacity: CA-SEP exhibited a 2.6-fold increase in MB adsorption capacity compared to pristine SEP, reaching a maximum of 17.42 mg/g under optimal conditions (pH 8.0, 298 K). The Langmuir model estimated a maximum adsorption capacity (qm) of 40.61 mg/g at 313 K.
  • Optimal Modification: The optimal citric acid concentration for modification was found to be 0.5 M.
  • Kinetic and Isotherm Fit: The adsorption process was best described by the pseudo-second-order (PSO) kinetic model and the Sips isotherm model.
  • Surface Area Reduction: CA modification led to a slight decrease in specific surface area and pore volume, suggesting pore blockage or structural alteration, but this did not hinder adsorption performance.
  • Real Wastewater Treatment: CA-SEP effectively removed MB and reduced color and CODcr in real textile wastewater samples, with one sample meeting stringent discharge standards.
  • Cost-Effectiveness: The estimated production cost of CA-SEP was approximately **$185 per ton**, significantly lower than commercial activated carbon (~$1200 per ton).

Limitations and Future Work

  • Surface Area vs. Functional Groups: While the study emphasizes the role of functional groups, the slight decrease in surface area due to modification might be a limitation for certain applications. Further research could explore modifications that enhance both functional groups and surface area.
  • Preliminary Cost Analysis: The cost evaluation is preliminary and based on raw material inputs. A full techno-economic analysis, including energy, equipment, and operational costs, is needed for accurate economic viability assessment at scale.
  • Regeneration Eluent: While an ethanol/water mixture was effective for regeneration, exploring other greener or more cost-effective eluents could be beneficial.
  • Long-Term Stability: While five cycles showed excellent reusability, investigating the adsorbent's performance over a larger number of cycles would provide a more comprehensive understanding of its long-term durability.
  • Wastewater Complexity: The study tested real wastewater samples, but further investigations into the adsorbent's performance with a wider range of complex industrial effluents containing various co-contaminants would be valuable.

Summary updated

Abstract

Eco-friendly clay-based adsorbents with low cost and high adsorption capacity for toxic dyes have attracted significant attention. In this study, a novel citric acid-modified sepiolite (CA-SEP) composite was developed for the efficient removal of methylene blue (MB) from aqueous solutions. The morphological, crystalline, and structural properties of the composite were characterized using XRD, FTIR, SEM, and BET analyses. Compared to pristine SEP, CA-SEP exhibited a 2.6-fold increase in adsorption capacity for MB and demonstrated excellent reusability. The effects of key parameters—including solution pH (2.0–10.0), contact time (0–300 min), adsorbent dosage (0.2–2.0 g/L), and initial MB concentration (10–150 mg/L)—on adsorption performance were systematically investigated. Modeling results indicated that the Sips isotherm provided the optimal fit for the equilibrium data. In kinetic studies, the adsorption process was best described by the pseudo-second-order model. The maximum adsorption capacity of CA-SEP for MB was estimated to be 40.61 mg/g. Moreover, the adsorbent retained high removal efficiency after five adsorption-desorption cycles, demonstrating good regenerability. These results indicate that CA-SEP is a highly efficient, sustainable, and economically viable adsorbent for the elimination of MB from contaminated water.
BibTeX
@inproceedings{tian2025citric,
  author = {Zhuangzhuang Tian and Ziyi Chen and Qing Wang and Xin Gao and Wei Wei},
  title = {{Citric Acid-Modified Sepiolite as an Efficient and Sustainable Adsorbent for the Removal of Methylene Blue from Aqueous Solutions}},
  booktitle = {Water},
  year = {2025},
  doi = {10.3390/w17202998},
}
Figure