Chest-wall reconstruction with a customized titanium-alloy prosthesis fabricated by 3D printing and rapid prototyping

Xiaopeng Wen, Shan Gao, Jinteng Feng, Shuo Li, Rui Gao, Guangjian ZhangJournal of Cardiothoracic Surgery 2018 · DOI

Abstract

Chest-wall reconstruction with a customized titanium-alloy prosthesis is a reliable technique for repairing bony defects. This study validates a digital pipeline that moves reconstruction from manual bending to precision engineering, achieving superior anatomical symmetry and mechanical strength compared to traditional methods.

Introduction

Large bony defects in the chest wall, typically resulting from extensive tumor resections, present a significant challenge for thoracic surgeons. Traditional reconstruction methods rely on generic materials such as Marlex mesh, bone cement, or standard titanium plates that must be manually shaped during surgery. These "one-size-fits-all" solutions often lead to poor anatomical fit, prolonged operating times, and mechanical complications like screw loosening or plate fracture. Furthermore, restoring the complex geometry of the ribcage is vital for maintaining respiratory function and aesthetic appearance. This paper presents a clinical workflow for repairing major chest-wall defects using custom-designed, 3D-printed titanium-alloy prostheses.

Methods and Materials

The researchers developed a multi-step digital-to-physical workflow to address these challenges:

  1. Imaging & Modeling: Helical CT data was processed using MIMICS software to create a high-fidelity 3D digital model of the patient’s skeletal anatomy.
  2. Custom Design: Using "mirroring technology," the authors utilized the patient’s healthy contralateral side as a template to design a perfectly symmetrical prosthesis in Digisurf software.
  3. Simulation: Before fabrication, ANSYS finite element analysis (FEA) was employed to simulate mechanical stress on the design, ensuring uniform load distribution.
  4. Prototyping: A resin (SLA) model was 3D-printed first to test the fit on a physical model of the patient’s chest.
  5. Fabrication: The final implant was produced via laser rapid prototyping using spherical titanium-alloy powder (Ti6Al4V) in an argon-shielded environment to prevent oxidation.
  6. Surgical Integration: The designs included a 2 cm redundant fixing area, providing surgeons with flexibility to adjust attachment points based on intraoperative findings.
Pre-operative CT imaging and 3D reconstruction for Case 1, showing the extent of the chest wall defect and planned reconstruction.

Case Studies

The study evaluated this workflow through two specific clinical cases:

  • Case 1: A 62-year-old male with a lung mass invading the 2nd and 3rd ribs.
  • Case 2: A 64-year-old male with a sternal chondrosarcoma requiring resection of the sternum and bilateral costal cartilages (ribs 3–7).
Clinical presentation and 3D modeling for Case 2, illustrating a large sternal tumor and the corresponding CT/3D reconstructions.

Results

The mechanical properties of the printed alloy were evaluated against the YY0117.1–2005 pharmaceutical industry standards for surgical implants.

Mechanical Performance

The 3D-printed Ti-alloy demonstrated exceptional strength, reaching an ultimate strength of 1005 ± 26 MPa (well above the ≥860 MPa industry standard) and a yield strength of 950 ± 14 MPa. The elongation rate (ductility) was 13.3%, surpassing the required ≥10%.

Clinical Outcomes

In both cases, the implants fit perfectly without the need for intraoperative adjustments. Case 1 was completed in just 120 minutes with minimal blood loss, highlighting the efficiency of pre-fabricated implants. At the 6-month follow-up, there were no signs of infection, implant rejection, or loosening of the fixation screws.

Discussion

The "mirroring" technique allows for a level of anatomical symmetry nearly impossible to replicate with manual shaping. Additionally, the 3D-printed titanium exceeded standard industry requirements for forged or cast titanium. Fitting a resin prototype to a 3D-printed model of the patient's actual defect before surgery significantly reduces surgical guesswork and operating time. Despite the high-tech approach, the custom prostheses cost between $1200 and $1300, making them financially competitive with traditional materials.

Limitations and Future Work

The primary limitation is the small sample size (n=2). Larger clinical trials are necessary to establish long-term durability. Furthermore, the software pipeline is currently fragmented, requiring multiple programs (MIMICS, Digisurf, and custom tools). Future work should focus on creating an integrated software suite and gathering multi-year data to confirm long-term fatigue resistance.

Conclusion

Customized 3D-printed titanium-alloy prostheses offer a precise, strong, and efficient solution for complex chest-wall reconstructions, significantly improving both functional and aesthetic outcomes for patients.

Summary updated

Abstract

Chest-wall reconstruction with a customized titanium-alloy prosthesis is a reliable technique for repairing bony defects.
BibTeX
@article{wen2018chest,
  author = {Xiaopeng Wen and Shan Gao and Jinteng Feng and Shuo Li and Rui Gao and Guangjian Zhang},
  title = {{Chest-wall reconstruction with a customized titanium-alloy prosthesis fabricated by 3D printing and rapid prototyping}},
  journal = {Journal of Cardiothoracic Surgery},
  year = {2018},
  doi = {10.1186/s13019-017-0692-3},
}
Figure