Characterization of an Ionization Readout Tile for nEXO

M. J. Jewell, A. Schubert, W. R. Cen, J. Dalmasson, R. DeVoe, L. Fabris, G. Gratta, A. Jamil, Gordon Li, A. Odian, M. Patel, A. Pocar, Delong Qiu, Qiuhong Wang, Liangjian Wen, J. B. Albert, G. Anton, I. J. Arnquist, I. Badhrees, P. S. Barbeau, D. Beck, V. Belov, F. Bourque, J. Brodsky, A. Brown, T. Brunner, A. Burenkov, G. F. Cao, Liqiang Cao, C. Chambers, Serge A. Charlebois, M. Chiu, B. T. Cleveland, Minor J. Coon, A. Craycraft, W. Cree, M. Côté, T. Daniels, S. J. Daugherty, J. Daughhetee, S. Delaquis, A. Der Mesrobian-Kabakian, T. Didberidze, J. Dilling, Ying Ding, M. J. Dolinski, A. Dragone, W. M. Fairbank, J. Farine, Soheyla Feyzbakhsh, Réjean Fontaine, D. Fudenberg, G. Giacomini, R. Gornea, E. V. Hansen, Devin K. Harris, M. Hasan, M. Heffner, E. W. Hoppe, A. House, P. Hufschmidt, M. Hughes, J. Hößl, Y. Ito, A. Iverson, X. S. Jiang, S. Johnston, A. Karelin, L. J. Kaufman, T. Koffas, S. Kravitz, R. Krücken, A. Kuchenkov, K.s. Kumar, Y. Lan, D. S. Leonard, S. Li, Z. Li, C. Licciardi, Y. H. Lin, R. MacLellan, Thilo Michel, B. Mong, David C. Moore, K. Murray, J. Newby, Zhe Ning, O. Njoya, F. Nolet, K. Odgers, M. Oriunno, J. L. Orrell, I. Ostrovskiy, C.t. Overman, G.s. Ortega, Samuel Parent, A. Piepke, J.‐f. Pratte, V. Radeka, E. RaguzinJournal of Instrumentation 2018 · DOI · arXiv

Abstract

A new design for the anode of a time projection chamber (TPC), consisting of a charge-detecting "tile", is investigated for use in large-scale liquid xenon detectors. The tile is produced by depositing 60 orthogonal metal charge-collecting strips, 3 mm wide, on a 10 cm $\times$ 10 cm fused-silica wafer. These charge tiles are intended for the proposed tonne-scale nEXO experiment to search for neutrinoless double-beta decay ($0\nu\beta\beta$). Modular by design, an array of tiles can cover a sizable area without the need for a Frisch grid, reducing radioactive backgrounds and mechanical complexity. A prototype tile tested in liquid xenon achieved an energy resolution of $\sigma/E = 5.5\%$ at 570 keV, comparable to the best intrinsic ionization-only resolutions reported in literature.

Introduction: The Challenge of $0\nu\beta\beta$ Detection

Searching for neutrinoless double-beta decay is a primary goal of modern particle physics. Detecting this rare process would demonstrate that neutrinos are Majorana particles and provide insight into the matter-antimatter asymmetry of the universe. Experiments like nEXO require massive detectors using tonnes of liquid xenon that must operate with extremely low background radiation.

Traditional TPCs utilize planes of thin, crossed wires to sense ionization electrons. However, scaling these to the meter-plus range presents significant engineering challenges. Wires require heavy tensioning frames that are difficult to manage at cryogenic temperatures and can introduce radioactive contaminants. Furthermore, traditional designs require a "Frisch grid" to shield the sense wires, adding further material and complexity to the detector's radioactive budget.

Modular Charge Tile Design

To address these challenges, the nEXO collaboration has developed a modular solution: Ionization Readout Tiles. Each tile is a 10 cm $\times$ 10 cm fused-silica wafer. On this substrate, 60 orthogonal metal strips (30 in X and 30 in Y) are deposited with a 3 mm pitch. The strips are composed of gold and titanium, with a thin layer of silicon dioxide ($SiO_2$) providing electrical isolation at the crossing points.

Schematic of the charge tile showing the orthogonal strip layout and microscopic detail of the $SiO_2$ isolation layer at the crossing points.

Because the strips are narrow, the "weighting field"—the region where moving electrons induce a measurable signal—is highly localized. This allows the detector to operate without a Frisch grid, significantly simplifying the mechanical design and reducing the potential for radioactive background interference.

Experimental Methodology

A prototype tile was integrated into a liquid xenon test cell and exposed to a $^{207}$Bi radioactive source to characterize its performance. The experimental setup included custom cryogenic preamplifiers designed to achieve low noise levels, approximately 200 electrons RMS.

Cross-section of the experimental test stand (left) and a detailed view of the TPC internals (right) showing the anode tile, cathode, and PMT placement.

The team utilized a two-stage simulation pipeline to interpret the results. GEANT4 and the Noble Element Simulation Technique (NEST) handled particle interactions and the microphysics of electron-ion recombination. A custom signal simulation then modeled electron drift, diffusion, and induced charges on the strips using the method of images.

Key Results and Discussion

The prototype achieved a landmark energy resolution of $\sigma/E = 5.5\%$ at 570 keV. This performance is comparable to the best results achieved with traditional wire-based TPCs under similar drift fields (936 V/cm). The experimental data showed very good agreement with the simulated Bismuth spectrum, validating the collaboration's understanding of the tile's electrostatic response.

While this study focused on ionization (charge), the researchers noted that liquid xenon produces both charge and scintillation light. These signals are anti-correlated; future integration of Silicon Photomultiplier (SiPM) arrays to capture light alongside the tile's charge data is expected to improve energy resolution further.

Conclusion and Future Outlook

The successful characterization of the ionization readout tile demonstrates that a modular, grid-less anode is a viable and high-performance alternative to traditional wire planes for large-scale TPCs. Future work will focus on integrating readout electronics (ASICs) directly onto the tiles to handle the thousands of channels required for a full-scale experiment and optimizing the geometry to reduce light shadowing and signal cross-talk.

Summary updated

Abstract

A new design for the anode of a time projection chamber, consisting of a charge-detecting "tile", is investigated for use in large scale liquid xenon detectors. The tile is produced by depositing 60 orthogonal metal charge-collecting strips, 3~mm wide, on a 10~\si{\cm} $\times$ 10~\si{\cm} fused-silica wafer. These charge tiles may be employed by large detectors, such as the proposed tonne-scale nEXO experiment to search for neutrinoless double-beta decay. Modular by design, an array of tiles can cover a sizable area. The width of each strip is small compared to the size of the tile, so a Frisch grid is not required. A grid-less, tiled anode design is beneficial for an experiment such as nEXO, where a wire tensioning support structure and Frisch grid might contribute radioactive backgrounds and would have to be designed to accommodate cycling to cryogenic temperatures. The segmented anode also reduces some degeneracies in signal reconstruction that arise in large-area crossed-wire time projection chambers. A prototype tile was tested in a cell containing liquid xenon. Very good agreement is achieved between the measured ionization spectrum of a $^{207}$Bi source and simulations that include the microphysics of recombination in xenon and a detailed modeling of the electrostatic field of the detector. An energy resolution $\sigma/E$=5.5\% is observed at 570~\si{keV}, comparable to the best intrinsic ionization-only resolution reported in literature for liquid xenon at 936~V/\si{cm}.
BibTeX
@article{jewell2018characterization,
  author = {M. J. Jewell and A. Schubert and W. R. Cen and J. Dalmasson and R. DeVoe and L. Fabris and G. Gratta and A. Jamil and Gordon Li and A. Odian and M. Patel and A. Pocar and Delong Qiu and Qiuhong Wang and Liangjian Wen and J. B. Albert and G. Anton and I. J. Arnquist and I. Badhrees and P. S. Barbeau and D. Beck and V. Belov and F. Bourque and J. Brodsky and A. Brown and T. Brunner and A. Burenkov and G. F. Cao and Liqiang Cao and C. Chambers and Serge A. Charlebois and M. Chiu and B. T. Cleveland and Minor J. Coon and A. Craycraft and W. Cree and M. Côté and T. Daniels and S. J. Daugherty and J. Daughhetee and S. Delaquis and A. Der Mesrobian-Kabakian and T. Didberidze and J. Dilling and Ying Ding and M. J. Dolinski and A. Dragone and W. M. Fairbank and J. Farine and Soheyla Feyzbakhsh and Réjean Fontaine and D. Fudenberg and G. Giacomini and R. Gornea and E. V. Hansen and Devin K. Harris and M. Hasan and M. Heffner and E. W. Hoppe and A. House and P. Hufschmidt and M. Hughes and J. Hößl and Y. Ito and A. Iverson and X. S. Jiang and S. Johnston and A. Karelin and L. J. Kaufman and T. Koffas and S. Kravitz and R. Krücken and A. Kuchenkov and K.S. Kumar and Y. Lan and D. S. Leonard and S. Li and Z. Li and C. Licciardi and Y. H. Lin and R. MacLellan and Thilo Michel and B. Mong and David C. Moore and K. Murray and J. Newby and Zhe Ning and O. Njoya and F. Nolet and K. Odgers and M. Oriunno and J. L. Orrell and I. Ostrovskiy and C.T. Overman and G.S. Ortega and Samuel Parent and A. Piepke and J.‐F. Pratte and V. Radeka and E. Raguzin},
  title = {{Characterization of an Ionization Readout Tile for nEXO}},
  journal = {Journal of Instrumentation},
  year = {2018},
  doi = {10.1088/1748-0221/13/01/p01006},
}
Figure