Characterization of a prototype SCUBA-2 1280-pixel submillimetre superconducting bolometer array
Lists
Only you see this
Abstract
We present the results of characterization measurements on a 1280 pixel superconducting bolometer array designed for operation at wavelengths around 450 μm. The array is a prototype for the sub-arrays which will form the focal plane for the SCUBA-2 sub-mm camera, being built for the James Clerk Maxwell Telescope (JCMT) in Hawaii. With over 10 000 pixels in total, it will provide a huge improvement in both sensitivity and mapping speed over existing instruments. The array consists of molybdenum-copper bi-layer TES (transition edge sensor) pixels, bonded to a multiplexer. The detectors operate at a temperature of approximately 175 mK, and require a heat sink at a temperature of approximately 60 mK. In contrast to previous TES arrays, the multiplexing elements are located beneath each pixel (an "in-focal plane" configuration). We present the results of electrical and optical measurements, and show that the optical NEP (noise equivalent power) is less than 1.4 × 10<sup>-16</sup> W Hz<sup>-0.5</sup> and thus within the goal of 1.5 × 10<sup>-16</sup> W Hz<sup>-0.5</sup>.
BibTeX
@inproceedings{woodcraft2006characterization,
author = {Adam L. Woodcraft and M. Hollister and Dan Bintley and Maureen A. Ellis and Xiaofeng Gao and W. S. Holland and Michael J. MacIntosh and P. A. R. Ade and Julian S. House and Cynthia L. Hunt and R. Sudiwala and William Duncan and G. C. Hilton and K. D. Irwin and C. D. Reintsema and Camelia Dunare and William Parkes and A.J. Walton and J. B. Kycia and M. Amiri and B. Burger and M. Halpern},
title = {{Characterization of a prototype SCUBA-2 1280-pixel submillimetre superconducting bolometer array}},
booktitle = {Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE},
year = {2006},
doi = {10.1117/12.671310},
}Loading related content...