Characterization and experimental verification of the rotating synthetic aperture optical imaging system

Yu Sun, Xiyang Zhi, Lei Zhang, Shikai Jiang, Tianjun Shi, Nan Wang, Jinnan GongScientific 2023 · DOI

Abstract

The rotating synthetic aperture (RSA) optical imaging system employs a rectangular primary mirror for detection. During the imaging process, the primary mirror rotates around the center to achieve the aperture equivalent to the long side of the rectangle at different rotation angles. As a result, the system's point spread function (PSF) changes over time, causing periodic time-varying characteristics in the acquired images' resolution. Moreover, due to the rectangular primary mirror, the images obtained by the RSA system are spatially asymmetric, with a lower resolution in the short side's direction than in the long side's direction. This paper characterizes the imaging quality degradation mechanism of the RSA system and the time-space evolution law of the imaging process. Through a semi-physical experimental platform, we quantify the impact on image degradation and evaluate the limitations of generic deep learning-based super-resolution methods in addressing these unique artifacts.

Introduction

In high-orbit remote sensing, the demand for higher resolution necessitates larger primary mirrors. However, traditional monolithic circular mirrors are heavy and difficult to launch. The Rotating Synthetic Aperture (RSA) system offers a lightweight alternative by using a slim rectangular mirror with a high aspect ratio. By rotating this mirror, the system can theoretically synthesize the resolution of a large circular aperture over time.

However, this design introduces a complex "spatially asymmetric and temporally periodic" blur. A rectangular aperture produces a PSF that is narrow in the direction of the long side (high resolution) and wide in the direction of the short side (low resolution). As the mirror spins, this elliptical blur rotates, creating images with resolution that varies both across the frame and over time.

Theoretical Modeling and Experimental Setup

The researchers first derived the mathematical PSF for a rotating rectangular pupil. The analysis confirmed that the system’s energy distribution is roughly elliptical and rotates in synchronization with the mirror's physical orientation.

Figure 1: Theoretical Point Spread Function (PSF) of the RSA system at rotation angles of 0°, 45°, 90°, and 135°, illustrating the spatially asymmetric and temporally periodic nature of the blur.

To verify these characteristics, a semi-physical simulation platform was constructed. Rather than relying solely on digital simulation, the team used a high-quality circular mirror and placed rotating rectangular mask plates in front of it to simulate various mirror geometries and aspect ratios. High-resolution remote sensing images from the WorldView-3 satellite—covering urban infrastructure and natural landscapes—were passed through this rig to create a specialized dataset of RSA-degraded image pairs.

Evaluation of Super-Resolution Methods

The study tested five state-of-the-art deep learning Super-Resolution (SR) networks: SRGAN, EDSR, SRMD, FSSR, and Real-ESRGAN. The goal was to determine if generic models, typically trained on isotropic (uniform) blur, could compensate for the extreme directional information loss inherent in RSA systems.

Key Findings

  • The Directional Information Gap: Resolution in the direction of the mirror's short side is dramatically lower than the long side. This creates a "striped" or "smeared" effect that changes orientation as the mirror rotates.
  • Texture Sensitivity: The system impacts complex textures (e.g., airports or forests) more severely than uniform scenes (e.g., open sea). PSNR and SSIM scores were consistently 5–10% lower for high-texture scenes.
  • Generic AI Limitations: While models like SRMD provided a quantitative boost (up to ~6 dB in PSNR), they failed to restore fine details in the "low-resolution" direction of the ellipse. Because these models are designed for uniform blur, they struggle with the extreme asymmetry of high-aspect-ratio mirrors.
  • Aspect Ratio Threshold: When the mirror's length-width ratio exceeds 7, image quality drops below the threshold required for reliable interpretation, even after AI enhancement.

Conclusion

The RSA system presents a unique challenge for image restoration due to its time-varying, asymmetric PSF. Current generic SR models treat RSA blur as a standard artifact rather than a mathematically predictable projection, leading to suboptimal reconstruction of directional details.

Future work should focus on physics-informed deep learning models. By incorporating the mirror's rotation angle and aspect ratio as priors, multi-frame reconstruction algorithms could potentially fuse a sequence of rotating images to synthesize a single, high-resolution circular-equivalent image, overcoming the limitations of single-image processing.

Summary updated

Abstract

The rotating synthetic aperture (RSA) optical imaging system employs a rectangular primary mirror for detection. During the imaging process, the primary mirror rotates around the center to achieve the aperture equivalent to the long side of the rectangle at different rotation angles. As a result, the system's point spread function changes over time, causing periodic time-varying characteristics in the acquired images' resolution. Moreover, due to the rectangular primary mirror, the images obtained by the RSA system are spatially asymmetric, with a lower resolution in the short side's direction than in the long side's direction. Hence, image processing techniques are necessary to enhance the image quality. To provide reference for the study of image quality improvement methods, we first characterize the imaging quality degradation mechanism of the RSA system and the time-space evolution law of the imaging process. We then establish an imaging experiment platform to simulate the dynamic imaging process of the RSA system. We quantify the RSA system's impact on image degradation using objective indexes. Subsequently, by comparing the imaging experiment results with theoretical analysis, we verify the spatially asymmetric and temporally periodic imaging characteristics of the RSA system. Lastly, we introduce image super-resolution experiments to assess the limitations of directly applying generic deep learning-based single image super-resolution methods to the images captured by the RSA system, thereby revealing the challenges involved in improving image quality for the RSA system.
BibTeX
@inproceedings{sun2023characterization,
  author = {Yu Sun and Xiyang Zhi and Lei Zhang and Shikai Jiang and Tianjun Shi and Nan Wang and Jinnan Gong},
  title = {{Characterization and experimental verification of the rotating synthetic aperture optical imaging system}},
  booktitle = {Scientific},
  year = {2023},
  doi = {10.1038/s41598-023-44382-2},
}
Figure