Characteristics-based measurements of supersonic flows from schlieren images

Alberto Guardone, Marta Zocca, Paolo Gajoni, Francesca Mondonico, Camilla Cecilia ContiExperiments in Fluids 2025 · DOI

Abstract

Schlieren photography is a cornerstone of aerospace engineering, traditionally used for qualitative visualization of shock waves and expansions. This research, published in Experiments in Fluids, introduces a novel method to extract quantitative Mach number and flow angle data from standard schlieren images. By utilizing the Method of Characteristics (MoC) and automated line detection, the technique reconstructs 2D supersonic flow fields, even in complex "non-ideal" gas environments where traditional sensors like Particle Image Velocimetry (PIV) are impractical.

Introduction

While schlieren images are visually striking, they typically only indicate where density gradients exist, rather than providing precise local flow properties. In the regime of Non-Ideal Compressible Fluid Dynamics (NICFD)—which involves complex organic vapors near their boiling points—obtaining quantitative data is exceptionally challenging. Traditional "seeding" for PIV is technically difficult in these high-pressure, high-temperature environments. This paper addresses the "internal point" problem: determining flow properties in the middle of a stream without prior knowledge of the flow direction.

Methodology

The proposed method relies on the geometric properties of supersonic flows described by the Method of Characteristics.

Automated Line Detection

The process begins with an automated algorithm based on the Hough transform to identify "Mach lines." These are tiny perturbations caused by microscopic surface roughness that propagate through the flow. The workflow involves several image processing steps, including spatial correspondence, contrast enhancement, and binarization, to isolate these features.

The 10-step automated workflow for extracting quantitative data from schlieren images.

Quantitative Reconstruction

  1. Internal Point Method: In a 2D supersonic flow, two families of characteristic lines ($C^+$ and $C^-$) intersect. The local flow angle ($\theta$) is the bisector of these lines, and the angle between them relates directly to the Mach angle ($\mu$). The Mach number is then calculated as $M = 1/\sin(\mu)$. This geometric approach is independent of the specific gas used.
  2. Wall Point Method: For measurements at solid boundaries, the authors integrate Riemann invariants from known internal points down to the wall.
  3. Thermodynamic State: By combining the measured Mach number with state equations and assuming constant total enthalpy and entropy, properties such as pressure, temperature, and density can be back-calculated.

Experimental Validation

The method was validated in the TROVA (Test-Rig for Organic VApours) wind tunnel using two primary setups:

  • Asymmetric Nozzle: Using siloxane MM ($C_6H_{18}OSi_2$) to create a complex, non-parallel flow field.
  • Diamond-Shaped Airfoil: Tested in a stream of siloxane MDM ($C_8H_{24}Si_3O_2$).

Results were compared against inviscid and RANS CFD simulations and physical pressure tap measurements.

Key Results and Discussion

The technique demonstrated high accuracy and robustness:

  • Precision: Measured Mach numbers generally agreed with CFD predictions within $\pm 5\%$, and flow angles were accurate to within $\pm 2^\circ$.
  • Non-Ideal Robustness: The method successfully reconstructed static pressures that matched physical tap data even in highly non-ideal regimes ($Z_t \approx 0.65$).
  • Exploiting "Noise": By using surface roughness as a feature to generate Mach waves, the method turns a common experimental nuisance into a valuable data source.
Close-up of the processed measurement area showing the intersection of characteristic lines.

Conclusion and Future Work

This characteristics-based approach transforms schlieren from a qualitative tool into a powerful quantitative diagnostic. Future work will focus on automating the "Wall Point Method" tracing and exploring extensions to 3D or axisymmetric flows. While the method requires visible Mach lines, it offers a robust alternative for flow visualization in challenging thermodynamic regimes.

Summary updated

BibTeX
@inproceedings{guardone2025characteristics,
  author = {Alberto Guardone and Marta Zocca and Paolo Gajoni and Francesca Mondonico and Camilla Cecilia Conti},
  title = {{Characteristics-based measurements of supersonic flows from schlieren images}},
  booktitle = {Experiments in Fluids},
  year = {2025},
  doi = {10.1007/s00348-025-03958-6},
}
Figure