Abstract
We report the observation of channel-width dependent enhancement in nanoscale field effect transistors containing lithographically-patterned silicon nanowires as the conduction channel. These devices behave as conventional metal-oxide-semiconductor field-effect transistors in reverse source drain bias. Reduction of nanowire width below 200 nm leads to dramatic change in the threshold voltage. Due to increased surface-to-volume ratio, these devices show higher transconductance per unit width at smaller width. Our devices with nanoscale channel width demonstrate extreme sensitivity to surface field profile, and therefore can be used as logic elements in computation and as ultrasensitive sensors of surface-charge in chemical and biological species.
Introduction
For decades, the semiconductor industry has followed Moore’s Law by scaling down planar CMOS devices. However, traditional scaling has reached a critical bottleneck where thinning the gate dielectric leads to excessive leakage currents and reliability issues. While "bottom-up" approaches—such as using chemically grown carbon nanotubes or silicon nanowires—offer excellent electrostatic control, they often lack the precise material control required for large-scale integration.
This study addresses these challenges by investigating high-performance, 3D transistor architectures fabricated via a "top-down" CMOS-compatible process. Specifically, we explore how the physical width of a silicon nanowire channel dictates its electrical behavior, demonstrating that geometry can serve as a powerful "control knob" for device performance.
Device Architecture and Fabrication
The devices were fabricated using a top-down nanofabrication approach on Silicon-on-Insulator (SOI) wafers with a 100 nm silicon layer. Using electron-beam lithography and surface nanomachining, nanowires were patterned with widths ranging from 100 nm to 400 nm.
Unlike standard planar transistors, these devices utilize a 3D gate architecture. A 20 nm layer of $Al_2O_3$ was deposited via Atomic Layer Deposition (ALD), followed by an aluminum top gate that wraps around the top and sides of the nanowire. This design maximizes electrostatic control over the conduction channel.
Electrical Characterization and Modeling
Because the fabrication process intentionally omitted high-temperature annealing to maintain simplicity, the source and drain contacts exhibited non-Ohmic, Schottky barrier behavior. To extract precise device parameters, we developed an analytical model combining thermionic emission and Frenkel-Poole emission (trap-assisted tunneling). This model allowed us to validate experimental $I-V$ characteristics and confirm that the equivalent resistance of these contacts remains negligible compared to the nanowire's resistance during sensing operations.
Results: The Impact of Channel Width
The core finding of this research is that the surface-to-volume ratio ($A_{sur}/V_{vol}$) is the primary driver of device performance. As the nanowire width decreases, the gate exerts significantly stronger control over the entire conduction channel. This leads to a dramatic shift in the threshold voltage ($V_t$), which was found to vary linearly with the surface-to-volume ratio.
Most notably, the transconductance ($g_m$) per unit width—a key metric for signal amplification efficiency—increased by nearly an order of magnitude as the width was scaled down. For a 20 nm thick oxide, the transconductance jumped from 6.31 nS/µm at a 400 nm width to 61.4 nS/µm at a 100 nm width. Even with a much thicker 120 nm oxide, the "narrow wire" effect remained strong enough to provide significant sensitivity enhancement.
Conclusion and Future Outlook
Our results demonstrate that controlling the transverse width of a 3D channel is a viable alternative to thinning gate dielectrics for performance gains. The 100 nm devices showed extreme sensitivity to surface field profiles, making them ideal candidates for ultrasensitive biochemical sensors capable of detecting species like proteins or glucose in real-time. Future work will focus on optimizing contact resistance through localized doping and functionalizing the nanowire surfaces for specific diagnostic applications.
Summary updated