Abstract
Aerial Base Stations (ABSs) are increasingly critical for emergency response and rural connectivity. However, they are constrained by limited power, long propagation distances, and spectrum scarcity. This paper presents a Dual-Band Aerial Access (DBAA) strategy that integrates UHF and S-band frequencies. Through empirical field measurements using a 35-meter airship and a novel joint spectrum-and-power allocation algorithm, the proposed scheme demonstrates significant capacity improvements—up to 73%—over traditional single-band airborne networks.
Introduction
The deployment of Aerial Base Stations (ABSs) on platforms like airships and drones offers a flexible solution for providing wide-area wireless coverage. Despite their potential, ABSs face a "trilemma": the need for high-speed data transmission over massive distances while operating on limited onboard power. Traditional single-band solutions often fail to balance coverage and throughput. Low-frequency bands (e.g., UHF) provide excellent diffraction and range but limited bandwidth, whereas high-frequency bands (e.g., S-band) offer high throughput but suffer from severe shadowing and path loss.
System Model and Dual-Band Strategy
The researchers proposed a DBAA architecture that leverages the complementary strengths of different frequency bands. In this model, the airship serves as a central hub, creating a tiered coverage area.
As shown in the system model, users located closer to the ABS or in clear line-of-sight (LOS) conditions are assigned to the high-frequency S-band (2160 MHz) to maximize data rates. Users at the network edge or behind obstacles are transitioned to the low-frequency UHF band (785 MHz), which maintains connectivity through superior diffraction capabilities.
Methodology and Field Measurements
To validate the model, a comprehensive field measurement campaign was conducted in Xi’an, China. A 35-meter-long airship was deployed at altitudes ranging from 50m to 950m.
The team utilized a ground vehicle (pictured above) equipped with a spectrum analyzer and GPS to measure signal strength across rural, suburban, and urban environments. These empirical data points were used to adapt the COST-2100 path loss model, introducing a specific altitude correction factor ($\Delta C_F$) to account for the unique fading characteristics of air-to-ground (A2G) channels.
Resource Allocation and Results
A joint optimization algorithm was developed to manage spectrum and power. The algorithm employs a "channel-condition-first" heuristic for band assignment and the Lagrange dual technique for power optimization.
Key findings include:
- Capacity Gains: The DBAA scheme achieved a 46% throughput increase over UHF-only systems and a 73% increase over S-band-only systems.
- Optimization Impact: Spectrum assignment was found to be more critical than power allocation, contributing approximately 36% to performance gains compared to 19% from power tuning.
- Range Resilience: While S-band signals often dropped after 20 km, the UHF band remained reliable up to 70 km, ensuring robust wide-area connectivity.
Conclusion
The integration of dual-band frequencies significantly enhances the performance and reliability of airborne networks. By intelligently matching users to frequency bands based on real-time channel conditions, the DBAA approach overcomes the limitations of single-band systems. Future research will focus on multi-ABS coordination and the potential of Non-Orthogonal Multiple Access (NOMA) to further increase spectral efficiency.
Summary updated