Challenges for the Interaction Region Design of the Future Circular Collider FCC-ee

M. Boscolo, N. Bacchetta, Michael Benedikt, Brunetti, Laurent, U. Bottigli, A. Ciarma, V. Dao, F. Fransesini, Mark A. Jones, R. Kersevan, M. Koratzinos, Fabio Maltoni, M. Migliorati, Eva Montbarbon, T. Nomura, K. Oide, L. Pellegrino, F. Poirier, L. Serafini, Michael Sullivan, L. Watrelot, 雄二郎 小川arXiv 2021 · DOI · arXiv

Abstract The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discuss the possible impact of the radiation generated in the interaction region including beamstrahlung.

Introduction: The MDI Challenge

The Future Circular Collider (FCC-ee) is envisioned as a 100 km "Higgs factory," colliding electrons and positrons at unprecedented intensities. A critical hurdle in its realization is the Machine Detector Interface (MDI). To maximize physics reach, detectors must be positioned as close as possible to the interaction point (IP). However, this proximity exposes sensitive equipment to extreme radiation and heat.

The design team is currently navigating a complex balancing act: shrinking the central beam pipe radius from 15 mm to a more ambitious 10 mm. While this improves vertex detector resolution, it significantly intensifies engineering challenges such as wakefield heating and beamstrahlung—radiation produced by the electromagnetic interaction between colliding bunches.

Schematic layout of the FCC-ee interaction region showing the central chamber, shielding, and final focus magnets.

Methodology and Simulation Framework

To model this high-stakes environment, researchers employed a suite of specialized simulation tools:

  • CST Studio Suite: Conducted 3D electromagnetic simulations to calculate wakefields—fields left by high-intensity bunches that cause parasitic heating.
  • SYNRAD+: Utilized ray-tracing to track synchrotron radiation (SR) photons, ensuring they are intercepted by masks before reaching the central beryllium pipe.
  • GuineaPig++: Simulated beamstrahlung to determine the energy spectra and impact locations of photons generated during collisions.
  • Geometry Optimization: Developed a "crab waist" collision scheme with a 30 mrad crossing angle to facilitate rapid beam separation and background minimization.

Key Design Innovations

The transition to a 10 mm beam pipe necessitated several innovative strategies:

  • Low Impedance Design: By smoothing internal geometries, the team reduced local heating power tenfold compared to previous iterations.
  • Strategic Coating: A few microns of gold coating on the beryllium pipe's interior serves a dual purpose: reducing resistive heat load at lower energies (Z-pole) and shielding against high-energy photons at the top-quark pair ($t\bar{t}$) threshold.
  • Shadowing the IP: Tungsten or lead masks placed 2.1 meters from the IP ensure the central chamber remains in a "shadow," preventing over 99.99% of synchrotron radiation from striking the detector.

Performance and Results

Simulations across four energy stages (Z, W, H, and top) demonstrate the viability of the revised layout. At the Z-pole, the resistive heat load for the 10 mm pipe is approximately 150 W/m, a manageable level for liquid cooling systems.

Power load as a function of bunch length, illustrating the thermal challenges of high-intensity operation.

Radiation control is equally successful, maintaining critical synchrotron radiation energies below 100 keV. Even at the highest $t\bar{t}$ energies, the "interacting power" from beamstrahlung hitting the pipe is limited to 0.4 kW, despite the massive total radiation produced at the IP. The design maintains a tight "free length" ($L^*$) of 2.2 meters from the IP to the first quadrupole magnet (QC1).

Future Directions

Despite these advances, several hurdles remain. The cantilevered configuration of magnets in a cramped space precludes standard alignment techniques, necessitating new radiation-hard, compact sensors. Furthermore, full Geant4 simulations are required to ensure detector occupancy remains within limits. Finally, the nanometer-scale beam sizes demand sophisticated active vibration-mitigation systems to prevent luminosity loss from mechanical instability.

Summary updated

Abstract

The FCC-ee is a proposed future high-energy, high-intensity and high-precision lepton collider. Here, we present the latest development for the FCC-ee interaction regions, which shall ensure optimum conditions for the particle physics experiments. We discuss measures of background reduction and a revised interaction region layout including a low impedance compact beam chamber design. We also discuss the possible impact of the radiation generated in the interaction region including beamstrahlung.
BibTeX
@misc{boscolo2021challenges,
  author = {M. Boscolo and N. Bacchetta and Michael Benedikt and Brunetti, Laurent and U. Bottigli and A. Ciarma and V. Dao and F. Fransesini and Mark A. Jones and R. Kersevan and M. Koratzinos and Fabio Maltoni and M. Migliorati and Eva Montbarbon and T. Nomura and K. Oide and L. Pellegrino and F. Poirier and L. Serafini and Michael Sullivan and L. Watrelot and 雄二郎 小川},
  title = {{Challenges for the Interaction Region Design of the Future Circular Collider FCC-ee}},
  year = {2021},
  eprint = {2105.09698},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2105.09698},
}

Loading related content...

Figure