Cell Alignment in Aqueous Solution Employing a Flexural Plate Wave Piezoelectric MEMS Transducer

Alessandro Nastro, Marco Baù, Marco Ferrari, Libor Rufer, Skandar Basrour, Vittorio FerrariIEEE Access 2023 · DOI

TL;DR

This paper presents a novel piezoelectric MEMS transducer that uses flexural plate waves to precisely align cells in aqueous solutions. This technology offers a label-free, non-contact method for manipulating biological cells, crucial for advancements in tissue engineering and medical diagnostics.

What Problem Does This Paper Address?

The precise alignment of cells is a critical challenge in various biological and medical applications. In tissue engineering, aligned cells are essential for restoring the function of tissues like blood vessels and promoting the regrowth of damaged nerves. In diagnostics, cell alignment can aid in early detection of abnormalities. Existing methods for cell manipulation, such as optical or magnetic tweezers, can be complex or invasive. Acoustophoresis, which uses acoustic waves, offers a promising label-free and non-contact approach, but achieving precise and controllable alignment patterns, especially in microfluidic devices, remains an area of active research. This paper addresses the need for a reliable and efficient method to generate controlled acoustic fields for cell alignment within a micro-scale device.

Methods

The core of this work is a custom-designed piezoelectric MEMS transducer. This transducer features a composite diaphragm made of doped silicon and aluminum nitride (AlN) piezoelectric material, housed within a silicon substrate with a central cavity. The AlN layer is patterned with interdigitated transducers (IDTs) that, when excited by an electrical signal, generate flexural plate waves (FPWs) in the diaphragm. These FPWs couple to the water in the cavity, creating a one-dimensional (1D) acoustic field. By exciting two symmetrically placed IDTs, standing FPWs are generated, leading to pressure nodes at half-wavelength intervals. These nodes act as traps for dispersed cells, effectively aligning them into regular patterns.

The device was fabricated using the PiezoMUMPs process. To understand and optimize the device's performance, a 2D finite element model was developed using COMSOL Multiphysics®. This model allowed for the simulation of the electro-mechanical behavior and the calculation of the electrical admittance of the IDTs. A tailored front-end electronic circuit, based on a direct digital synthesizer (DDS), was designed to precisely control the excitation signals applied to the IDTs, enabling the generation of the required acoustic field.

Datasets

Not discussed in the paper. The study uses inactive fibroblast cells with an approximate diameter of 15 µm, dispersed in demineralized water, as the biological sample for alignment.

Key Insights and Ideas

  • FPWs for Controlled Cell Alignment: The paper demonstrates that flexural plate waves (FPWs) generated by a piezoelectric MEMS transducer can effectively create a 1D acoustic field pattern suitable for precise cell alignment.
  • Wavelength Matching for Efficient Coupling: The design emphasizes matching the acoustic wavelength in the diaphragm to the wavelength of the acoustic waves in the water. This crucial step ensures efficient energy transfer and the generation of strong acoustic radiation forces for cell manipulation.
  • 1D Patterning with Symmetrical IDT Excitation: By exciting two symmetrically placed IDTs, a standing wave pattern is established, leading to predictable and regular cell alignment at specific intervals (half the acoustic wavelength).
  • Integrated MEMS and Electronics Solution: The work highlights the successful integration of a custom MEMS transducer with a tailored DDS-based electronic circuit, providing a complete system for controlled cell manipulation.
  • Validation through Simulation and Experiment: The theoretical predictions and simulation results were rigorously validated by experimental measurements of the device's electrical admittance and direct observation of cell alignment.

Key Results

  • Cell Alignment Achieved: The MEMS transducer successfully aligned inactive fibroblast cells (15 µm diameter) in demineralized water.
  • Precise Spacing: The aligned cells formed lines with a spacing of approximately 56 µm, which corresponds to half the acoustic wavelength (λ/2), validating the theoretical predictions.
  • Frequency of Operation: Cell alignment was achieved at an excitation frequency of 12.5 MHz, falling within the predicted range of 13 ± 1.4 MHz.
  • Good Agreement between Simulation and Experiment: The simulated and experimentally measured electrical admittance of the IDTs showed remarkable agreement, with minor discrepancies attributed to fabrication tolerances.
  • High Cell Concentration: The experiments were conducted with a cell concentration of approximately 10⁵ cells/ml.

Limitations and Future Work

Limitations: * The current study focuses on 1D cell alignment. * The paper mentions residual discrepancies between simulated and experimental results, likely due to fabrication process tolerances and simplifying assumptions in the 2D model.

Future Work: * Exploiting the MEMS transducer to generate 2D acoustic field patterns by driving four IDTs. * Integrating the MEMS device into a dedicated lab-on-chip system to expand application possibilities.

Summary updated

BibTeX
@article{nastro2023cell,
  author = {Alessandro Nastro and Marco Baù and Marco Ferrari and Libor Rufer and Skandar Basrour and Vittorio Ferrari},
  title = {{Cell Alignment in Aqueous Solution Employing a Flexural Plate Wave Piezoelectric MEMS Transducer}},
  journal = {IEEE Access},
  year = {2023},
  doi = {10.1109/access.2023.3333694},
}
Figure