Caterpillar-Inspired Multi-Gait Generation Method for Series-Parallel Hybrid Segmented Robot

Mingyuan Dou, Ning He, Jianhua Yang, Lile He, Jiaxuan Chen, Yating ZhangBiomimetics 2024 · DOI

TL;DR

This paper introduces a novel "Stable Segment Update" (SSU) gait generation method inspired by caterpillar locomotion for series-parallel hybrid segmented robots. By modeling caterpillar movement as a unified framework and transforming it into an end-effector tracking problem, the SSU method enables the generation of multiple gaits for enhanced adaptability in challenging terrains.

What Problem Does This Paper Address?

Navigating complex and unstructured environments, such as pipelines or disaster sites, is a significant challenge for robots. Segmented robots, with their ability to adapt their form, are well-suited for these tasks. While innovative serial-parallel hybrid segmented robots offer a versatile platform, their hyper-redundancy presents a challenge for effective gait generation. Existing methods often lack a unified framework for multi-segment control or struggle to leverage the full potential of these complex structures. This paper aims to address this by developing a unified gait generation method that mimics the efficient and stable locomotion of caterpillars, enabling segmented robots to traverse difficult terrains.

Methods

The core of this work is the Stable Segment Update (SSU) gait generation method. The authors draw inspiration from natural caterpillars, modeling each segment as a rigid body with six degrees of freedom. The SSU method parameterizes caterpillar-like gaits by abstracting the locomotion into a series of discrete "hump waves."

Key methodological aspects include:

  • Unified Framework: The SSU approach establishes a single framework for generating multiple gaits, unlike previous methods that might require unique formulas for each gait.
  • End-Effector Tracking: The complex hyper-redundant motion of the segmented robot is simplified into a single-segment end-effector tracking problem. This is achieved by analyzing forward kinematics and identifying a minimum lifting segment.
  • Parameterization: Three distinct parameter sets are introduced within the SSU method to control the stability and efficiency of the robot's motion. These parameters define the "hump waves" that drive locomotion.
  • Kinematic Analysis: Trajectories for each swinging segment are determined through kinematic analysis, ensuring coordinated movement.
  • Robot Modeling: The paper details the kinematics of a specific 4-3-RSR series-parallel hybrid segmented robot, which serves as the experimental platform. This includes deriving forward and inverse kinematics solutions for the robot's segments.

Datasets

Not discussed in the paper. The experiments rely on a custom-built 4-3-RSR robot and simulated gait generation.

Key Insights and Ideas

  • Caterpillar Locomotion as a Unified Model: The paper successfully demonstrates that the complex, multi-segment locomotion of caterpillars can be effectively abstracted into a unified gait generation framework (SSU) using a limited set of parameters.
  • End-Effector Tracking for Hyper-Redundancy: Transforming the hyper-redundant segmented robot problem into a single-segment end-effector tracking task is a clever simplification that allows for more precise control and potentially better performance.
  • Parameter-Driven Gait Generation: The SSU method's ability to generate diverse gaits by simply adjusting a few key parameters (like q, Ns, λ) offers a flexible and efficient way to adapt to different terrains and tasks.
  • Stability vs. Speed Trade-off: The research highlights how different gait parameters can influence the robot's stability and speed, allowing for tailored locomotion strategies. For instance, reducing the number of swinging segments (Ns) improves stability.

Key Results

The experimental validation of the SSU method on a 4-3-RSR robot demonstrated its effectiveness in generating multiple gaits with varying speeds and adaptability.

  • Multi-Gait Generation: The SSU method successfully generated three distinct gaits: 1-1-1-1-1, 1-1-2-1, and 1-2-2.
  • Speed Performance:
    • At T = 40 ms, speeds were around 22.6-22.9 mm/s.
  • At T = 400 ms, the 1-2-2 and 1-1-2-1 gaits were significantly faster (45.17% and 17.76% respectively) than the 1-1-1-1-1 gait.
  • A rectilinear-like gait achieved a speed of 43.43 mm/s.
  • Environmental Adaptability:
    • Gap Crossing: The 1-1-1-1-1 gait successfully crossed a 30 mm gap, demonstrating robustness even without gap perception.
  • Rough Terrain: The 1-1-1-1-1 gait achieved a speed of 6.14 mm/s on bentonite particles, with a normalized velocity comparable to or better than other studies. The 1-1-2-1 gait was slower on rough terrain.
  • Normalized Velocity: The normalized velocity achieved by the SSU method was found to be superior to or comparable to many existing caterpillar-inspired robots.

Limitations and Future Work

The authors acknowledge several limitations and propose future research directions:

  • Lack of Dynamic Model and Friction Model: The current experiments were conducted without a precise dynamic model or substrate friction model. This led to some backward movement and rebound effects, particularly evident in certain gaits. Future work should incorporate these models for more accurate control and improved performance.
  • Discrete Step-by-Step Movement: The SSU method, by its nature, generates discrete step-by-step movements. This limits its efficiency in continuous locomotion compared to gaits like the serpentine gait.
  • Limited Blind Walking Adaptability: The 1-1-1-1-1 gait, while robust, has limited blind walking adaptability and reduced speed.
  • Optimizing for Surface Curvature: For more complex environments, optimizing single-segment trajectories to adapt to surface curvature is suggested.
  • Impact of Friction: The significant decay in speed at higher locomotion speeds due to neglected friction needs to be addressed by incorporating friction into trajectory optimization.
  • Adhesion Devices: The authors plan to explore attaching adhesion devices to segments to enhance climbing abilities, which could be valuable for applications like earthquake relief and urban search and rescue.
  • Higher Degrees of Freedom: The paper notes that robots with higher degrees of freedom per segment might offer wider workspaces for SSU parameter planning and trajectory generation.

Summary updated

Abstract

The body structures and motion stability of worm-like and snake-like robots have garnered significant research interest. Recently, innovative serial-parallel hybrid segmented robots have emerged as a fundamental platform for a wide range of motion modes. To address the hyper-redundancy characteristics of these hybrid structures, we propose a novel caterpillar-inspired Stable Segment Update (SSU) gait generation approach, establishing a unified framework for multi-segment robot gait generation. Drawing inspiration from the locomotion of natural caterpillars, the segments are modeled as rigid bodies with six degrees of freedom (DOF). The SSU gait generation method is specifically designed to parameterize caterpillar-like gaits. An inverse kinematics solution is derived by analyzing the forward kinematics and identifying the minimum lifting segment, framing the problem as a single-segment end-effector tracking task. Three distinct parameter sets are introduced within the SSU method to account for the stability of robot motion. These parameters, represented as discrete hump waves, are intended to improve motion efficiency during locomotion. Furthermore, the trajectories for each swinging segment are determined through kinematic analysis. Experimental results validate the effectiveness of the proposed SSU multi-gait generation method, demonstrating the successful traversal of gaps and rough terrain.
BibTeX
@inproceedings{dou2024caterpillar,
  author = {Mingyuan Dou and Ning He and Jianhua Yang and Lile He and Jiaxuan Chen and Yating Zhang},
  title = {{Caterpillar-Inspired Multi-Gait Generation Method for Series-Parallel Hybrid Segmented Robot}},
  booktitle = {Biomimetics},
  year = {2024},
  doi = {10.3390/biomimetics9120754},
}
Figure