Cascaded Catalytic Copyrolysis of Microalgae and LDPE with Ni/Biochar and HZSM-5 for Improving High-Grade Bio-Oil Production

Lei Liu, Wenguang Zhou, Yunpu Wang, Yinghua Yao, Jun Qian, Jiabo Wu, Jinye Hu, Mengjiao Wang, Weixin Wang, Ting Luo, Kuangli Jin, Liangliang FanACS 2023 · DOI

Abstract

The N and O elements of microalgae are mainly responsible for the low quality of the bio-oil, and it is difficult to completely remove the heteroatomic compounds by any single catalyst. In this study, the tandem catalysts of Ni/biochar and HZSM-5 were used for the catalytic copyrolysis of microalgae and low-density polyethylene (LDPE). The tandem catalysts improved the product yield and conversion rate compared to Ni/biochar or HZSM-5 alone. Higher addition of LDPE also favored feedstock conversion. During the cascaded catalytic pyrolysis, up to 100% of C5–C12 hydrocarbons, including 48.6% for BTX, were obtained. The selectivity of C5–C12 hydrocarbons was increased by 45.2% due to the synergistic effect of the two catalysts. The copyrolysis process improved the production of C5–C12 hydrocarbons with the highest synergistic degree of 83.1% and resulted in the complete removal of N and O. The plausible pathway for the formation of aromatics and short-chain hydrocarbons was elucidated based on the synergistic effects.
BibTeX
@inproceedings{liu2023cascaded,
  author = {Lei Liu and Wenguang Zhou and Yunpu Wang and Yinghua Yao and Jun Qian and Jiabo Wu and Jinye Hu and Mengjiao Wang and Weixin Wang and Ting Luo and Kuangli Jin and Liangliang Fan},
  title = {{Cascaded Catalytic Copyrolysis of Microalgae and LDPE with Ni/Biochar and HZSM-5 for Improving High-Grade Bio-Oil Production}},
  booktitle = {ACS},
  year = {2023},
  doi = {10.1021/acssuschemeng.3c04597},
}

Loading related content...

Figure