Carbon reduction potential and selection strategies of emerging construction-phase technologies

Zhiping Liu, Zongjun Xia, Jie Li, Yifei Wang, Peng Zhang, X. Z. Li, Qi YangScientific 2026 · DOI

TL;DR

This paper quantifies the carbon reduction potential of 25 emerging construction technologies, categorizing them by their reduction pathways. It reveals that renewable energy and waste reduction technologies offer the most significant on-site carbon emission reductions, while prefabrication technologies also show substantial benefits. A case study demonstrates that integrating multiple technologies can achieve nearly 30% reduction in construction-phase emissions.

What Problem Does This Paper Address?

The building sector is a major global contributor to carbon emissions. While much focus has been placed on operational carbon reduction, the construction phase, though shorter in duration, involves intense emissions. This paper addresses the challenge of identifying and selecting effective emerging technologies to mitigate these construction-phase emissions. Existing research often focuses on individual technologies, lacking a comprehensive comparison and classification that would guide strategic adoption and policy development for achieving carbon neutrality in construction.

Methods

The study employs a quantitative approach to evaluate the carbon reduction potential of 25 emerging construction technologies. Key methods include:

  • Carbon Emission Boundary Determination: The analysis focuses on on-site emissions during the construction phase, aligning with Module A5 of the ISO 21,930 standard. This includes emissions from material consumption, equipment use, and waste transportation.
  • Carbon Emission Calculation: Standard methodologies from the IPCC Guidelines for National Greenhouse Gas Inventories are adapted. This involves calculating emissions from:
  • Material Consumption: Using material-specific carbon emission factors.
  • Equipment Use: Accounting for energy consumption (electricity, diesel) of construction machinery.
  • Waste Transportation: Estimating emissions from moving waste materials to treatment facilities.
  • Relative Carbon Reduction Percentage: To overcome inconsistencies in measurement units across different technologies, a relative percentage is used to quantify emission reduction benefits compared to traditional methods.
  • Technology Categorization: The 25 technologies are classified into four groups based on their carbon reduction pathways:
  • High-strength and high-performance material technologies.
  • Simplified construction process technologies.
  • Renewable resources and waste reduction technologies.
  • Prefabrication technologies.
  • Case Study Verification: A real-world project (Xinyang CAZ Double Innovation Industrial Park) is used to validate the proposed technology selection strategy and quantify the integrated reduction achieved.

Datasets

Not explicitly discussed as distinct datasets. The study relies on:

  • Carbon Emission Factors: Derived from the 2006 IPCC Guidelines for National Greenhouse Gas Inventories (2019 Refinement) and provided in online appendices.
  • Material and Equipment Data: Specific consumption values and energy coefficients for various materials and equipment are detailed in online appendices.
  • Waste Type and Volume Coefficients: Also provided in online appendices.
  • Project-Specific Data: For the case study, data on the application of eight specific technologies and their quantities were collected from the Xinyang CAZ Double Innovation Industrial Park project.

Key Insights and Ideas

  • Renewable Resources & Waste Reduction Lead: These technologies offer the highest potential for on-site carbon reduction, achieving up to 100% reduction by utilizing clean energy and minimizing waste transportation. This highlights a critical pathway for achieving carbon neutrality in construction.
  • Prefabrication's Transformative Power: Shifting processes to factories and focusing on on-site assembly can reduce emissions by over 90%, fundamentally changing construction workflows and offering significant environmental benefits.
  • Simplified Processes Offer Variable Gains: Technologies that streamline construction processes show diverse reduction rates, directly tied to how effectively they eliminate energy-intensive or waste-generating steps.
  • Materials Offer Incremental Gains: High-strength and high-performance materials provide the least direct carbon reduction (<30%) by optimizing material use, rather than fundamentally changing processes or energy sources.
  • Synergistic Benefits of Integration: The case study powerfully demonstrates that combining multiple technologies, rather than relying on a single solution, leads to substantial overall emission reductions. This underscores the importance of a holistic approach.
  • "Carbon Reduction Pathway-Technology Typology-Reduction Pathway" Framework: The study proposes a novel framework to guide technology selection, moving beyond vague sustainability goals to actionable insights.

Key Results

  • Technology Categorization: The study successfully categorizes 25 emerging construction technologies into four distinct groups based on their carbon reduction pathways.
  • Highest Reduction Potential: Renewable resources and waste reduction technologies achieved up to 100% on-site carbon emission reduction.
  • Significant Prefabrication Benefits: Prefabrication technologies generally reduce emissions by over 90%.
  • Limited Material-Based Reductions: High-strength and high-performance material technologies showed the least reduction, generally below 30%.
  • Case Study Success: The integrated application of eight selected technologies in the Xinyang CAZ Double Innovation Industrial Park project resulted in a 28.49% reduction in on-site construction-phase carbon emissions, equivalent to the sequestration of 9,080 trees over the project's duration.
  • Contribution Breakdown in Case Study: High-strength bar technology contributed the largest share (54.3%) due to its widespread application, followed by construction waste reduction (26.6%).

Limitations and Future Work

  • Order of Magnitude Analysis: The study acknowledges that its analysis is based on orders of magnitude, which can vary significantly between projects.
  • Scalability: The scalability of emerging technologies is not addressed.
  • Logistical and Carbon Footprint Implications: The implications of transporting prefabricated components across regions and the associated logistical and carbon footprints were not fully explored.
  • Policy Instrument Effectiveness: The varying effectiveness of policy instruments across different local governance contexts was not evaluated.

Future Work: The authors suggest future research should focus on:

  • Addressing the limitations mentioned above, including full lifecycle cost assessments.
  • Utilizing digital tools (BIM, AI) to optimize technology synergies and logistics.
  • Expanding datasets to identify generalized principles for technological interactions.
  • Evaluating technology applicability and performance within diverse local policy frameworks.

Summary updated

Abstract

Carbon reduction has emerged as a critical global challenge. The building sector, as the primary contributor to carbon emissions, stands to benefit substantially from the adoption of emerging technologies during construction. This study quantitatively evaluates the carbon reduction potential of 25 emerging construction technologies, investigates their reduction pathways, and provides a comparative analysis and classification of these techniques. The results demonstrate that renewable resources and waste reduction technologies offer substantial reductions in carbon emissions from energy consumption and waste transportation, presenting a key avenue for achieving carbon neutrality in the construction phase. Prefabrication technologies, which relocate traditional on-site curing processes to factories while retaining only assembly tasks on-site, reduce emissions by over 90%. Technologies streamlining construction processes exhibit varying reduction rates, influenced by their impact on workflows. High-strength and high-performance materials, which optimize concrete and steel use on-site, show the least reduction (< 30%). A phase-specific technology selection strategy is proposed and validated through a case study, which demonstrates a 28.49% reduction in on-site emissions during construction through the integrated application of multiple technologies. In conclusion, this study quantifies the carbon reduction potential and pathways of emerging construction technologies, offering data-driven insights for technology selection, industry adoption, and policy development.
BibTeX
@inproceedings{liu2026carbon,
  author = {Zhiping Liu and Zongjun Xia and Jie Li and Yifei Wang and Peng Zhang and X. Z. Li and Qi Yang},
  title = {{Carbon reduction potential and selection strategies of emerging construction-phase technologies}},
  booktitle = {Scientific},
  year = {2026},
  doi = {10.1038/s41598-026-39122-1},
}
Figure