BUILDING CHANGE DETECTION BY COMBINING LiDAR DATA AND ORTHO IMAGE

Daifeng Peng, Yongjun Zhang2016 · DOI

Abstract

Traditional building change detection methods often neglect elevation information, leading to inaccuracies in complex urban environments. This paper proposes a novel algorithm that fuses multi-temporal LiDAR data with ortho images (DOMs) for 3D building change detection. By combining height and spectral information through thematic segmentation, the method leverages both pixel-level differencing and object-level analysis. Experimental results on a 1 km² area in Guangzhou, China, demonstrate that this fusion approach achieves 81.8% completeness and 85.7% correctness for buildings larger than 80 m², marking a 10% improvement over image-only methods.

The Challenge of Urban Change Detection

Accurate detection of urban changes is vital for planning and disaster management. However, traditional 2D spectral analysis faces significant hurdles:

  1. Spectral Confusion: Buildings, roads, and bare ground often share similar spectral signatures, making them difficult to distinguish.
  2. Geometric Distortion: Shadows and perspective tilts in aerial imagery can create false change signals.

While Digital Surface Models (DSMs) from stereo imagery offer some relief, they are frequently noisy. This research utilizes LiDAR to provide precise 3D height data, effectively separating buildings from their flat surroundings.

A Hybrid 3D Detection Pipeline

The proposed method employs a multi-stage pipeline that integrates pixel-level change detection with object-level classification.

1. Data Preparation and Differencing

Two periods of LiDAR data are filtered and interpolated to generate corresponding DSMs. A "differential DSM" (dDSM) is then created by subtracting the two models, highlighting potential height changes.

Comparison of multi-temporal DSMs and Ortho images used for change detection.

2. Filtering and Segmentation

To eliminate noise from moving objects (e.g., cars) or vegetation, the dDSM is processed using height thresholds (2.5m), texture entropy filtering, and morphological operations. The resulting binary change map is then used for thematic segmentation in eCognition, grouping pixels into meaningful "objects."

3. Feature Fusion and Classification

The core of the detection logic lies in the synergy between height and color. The researchers found that combining Mean Height (MH) from LiDAR with the Ratio of Green Band (RG) from ortho images is the most effective way to distinguish buildings from trees and ground. A Decision Tree classifier then categorizes these objects as 'Newly-built', 'Heightened', or 'Demolished'.

A Digital Surface Model (DSM) illustrating the height information used to distinguish buildings from ground level.

Key Results and Insights

The fusion of LiDAR and ortho imagery significantly outperforms single-source methods:

  • Accuracy Boost: The system achieved a 10% improvement in both completeness and correctness compared to using ortho images alone.
  • Vertical Change Detection: Unlike 2D methods, this 3D approach successfully identifies "Heightened" buildings—structures where floors were added without changing the footprint.
  • Object-Level Advantage: By analyzing objects rather than individual pixels, the method avoids the "salt-and-pepper" noise typical of pixel-based change detection.

Conclusion

This research demonstrates that combining LiDAR-derived height information with spectral data from ortho images provides a robust solution for 3D building change detection. While the method excels for buildings larger than 80 m², future work will focus on improving the detection of smaller structures and minor building appendages, which are currently often filtered out as noise.

Summary updated

Abstract

The elevation information is not considered in the traditional building change detection methods. This paper presents an algorithm of combining LiDAR data and ortho image for 3D building change detection. The advantages of the proposed approach lie in the fusion of the height and spectral information by thematic segmentation. Furthermore, the proposed method also combines the advantages of pixel-level and object-level change detection by image differencing and object analysis. Firstly, two periods of LiDAR data are filtered and interpolated to generate their corresponding DSMs. Secondly, a binary image of the changed areas is generated by means of differencing and filtering the two DSMs, and then thematic layer is generated and projected onto the DSMs and DOMs. Thirdly, geometric and spectral features of the changed area are calculated, which is followed by decision tree classification for the purpose of extracting the changed building areas. Finally, the statistics of the elevation and area change information as well as the change type of the changed buildings are done for building change analysis. Experimental results show that the completeness and correctness of building change detection are close to 81.8% and 85.7% respectively when the building area is larger than 80 m2, which are increased about 10% when compared with using ortho image alone.
BibTeX
@inproceedings{peng2016building,
  author = {Daifeng Peng and Yongjun Zhang},
  title = {{BUILDING CHANGE DETECTION BY COMBINING LiDAR DATA AND ORTHO IMAGE}},
  booktitle = {˜The},
  year = {2016},
  doi = {10.5194/isprs-archives-xli-b3-669-2016},
}
Figure