Broadband Proximity Coupled Millimeter-wave Microstrip Array Antenna for Automotive Radar Applications

Shuo Wang, Dan Zhang, Zhendong Ding, Huiwen Chen, Shenxiang YangProgress 2022 · DOI

This research paper presents a novel antenna design tailored for the 77–81 GHz frequency band, a critical range for modern automotive radar systems. By moving away from traditional "direct-feed" methods and utilizing trapezoidal radiating elements, the authors achieved a compact, high-gain antenna with significantly wider bandwidth than previous designs.

TL;DR

Researchers have developed a 1×16 microstrip array antenna that uses indirect proximity coupling and trapezoidal patches to achieve a 7.6% impedance bandwidth and low sidelobes (<-20 dB). This design overcomes the narrow bandwidth limitations of traditional series-fed antennas while maintaining a compact, single-layer footprint ideal for automotive radar.

What Problem Does This Paper Address?

Automotive radar (used for anti-collision and autonomous driving) requires antennas that are low-profile, inexpensive, and high-performance. Microstrip patch antennas are the standard choice because they are easy to manufacture. However, engineers face a "pick your poison" scenario with traditional feeding structures:

  1. Parallel-fed arrays: Offer wide bandwidth but require bulky, lossy feed networks.
  2. Series-fed arrays: Are compact and simple but typically suffer from very narrow impedance bandwidths (often 1% to 4%).

Furthermore, radar antennas must have a low sidelobe level (SLL) to avoid "ghost" detections and interference from objects outside the main beam. Achieving both wide bandwidth and low SLL in a compact mmWave package is a significant engineering challenge.

Methods

The authors propose a series-fed, proximity-coupled architecture.

  • Proximity Coupling: Instead of the microstrip line physically touching the radiating patches (inductive coupling), the patches are placed near the line. This creates capacitive coupling, which inherently supports a wider frequency range.
  • Trapezoidal Geometry: Rather than standard rectangular patches, the authors used trapezoidal shapes. This geometry enhances the excitation coupling and acts as a natural filter, suppressing out-of-band frequencies.
  • Amplitude Tapering via Gap Control: To achieve a low SLL, the antenna needs a "Taylor distribution"—meaning the elements in the center of the array radiate more power than those at the edges. The authors achieved this by precisely varying the gap ($d_n$) between the feed line and each trapezoidal patch. A smaller gap increases coupling (more power), while a larger gap decreases it.
  • Simulation & Fabrication: The design was optimized using HFSS 15.0 and fabricated on a 0.127 mm thick RO3003 substrate.

Datasets

As an antenna engineering paper, this study does not use traditional software datasets. Instead, it evaluates performance against:

  • Material Benchmarks: Standard high-frequency substrate properties (RO3003, $\epsilon_r = 3.0$).
  • Comparative Literature: The results are compared against five previously published series-fed linear arrays (References [9] through [14] in the paper) to demonstrate improvements in bandwidth and gain.

Key Insights and Ideas

  • Capacitive vs. Inductive: The "aha moment" is the shift in coupling mechanism. By switching to proximity coupling, the authors changed the physics of the feed from inductive to capacitive, which is the primary driver for the jump from ~3% bandwidth to 7.6%.
  • The Gap as a Tuning Knob: In many designs, changing the power of an element requires changing the size of the patch, which can shift the resonant frequency. By keeping the patch size constant and only changing the distance (gap) from the feed line, the authors could control the SLL without de-tuning the antenna.
  • Spatial Filtering: The trapezoidal shape isn't just for bandwidth; it helps ensure that currents for out-of-band frequencies are out of phase, effectively "canceling out" unwanted signals and improving the signal-to-noise ratio for the radar.

Key Results

The fabricated 1×16 linear array demonstrated excellent performance across the 77–81 GHz band:

  • Impedance Bandwidth: 7.6% (75.6–81.6 GHz), which is roughly double the bandwidth of many traditional series-fed designs.
  • Sidelobe Level (SLL): Measured at better than −20 dB, ensuring high spatial resolution and low interference.
  • Gain: Higher than 15 dBi across the entire operating range, peaking at 15.76 dBi.
  • Beam Stability: The beam direction remained stable with only minor shifts (−1° to +2°) across the frequency range, proving the stability of the proximity-coupled structure.

Limitations and Future Work

  • Manufacturing Sensitivity: The authors noted that measured resonance points shifted slightly compared to simulations. This was attributed to manufacturing tolerances in the tiny gaps ($0.1$ mm to $0.175$ mm) and the microstrip-to-waveguide transition used for testing.
  • 1D vs. 2D: This paper focuses on a 1×16 linear array (1D). Real-world radar often requires 2D arrays for both azimuth and elevation tracking.
  • Integration: While the antenna performs well, future work would likely involve integrating this design directly with automotive radar RFICs (Radio Frequency Integrated Circuits) to minimize transition losses.

Reference: Wang, S., Zhang, D., Ding, Z., Chen, H., & Yang, S. (2022). Broadband Proximity Coupled Millimeter-Wave Microstrip Array Antenna for Automotive Radar Applications. Progress In Electromagnetics Research Letters, Vol. 107, 93–101.

Summary updated

Abstract

In this letter, a broadband proximity coupled millimeter-wave microstrip array antenna is presented for automotive radar applications. The antenna array consists of a microstrip line and a series of trapezoidal radiating elements that are periodically arranged on both sides of the microstrip line, at intervals of about half the guided-wavelength. The introduction of the trapezoidal radiating patch enhances the excitation coupling while suppressing out-of-band frequencies, and it has a wider impedance bandwidth than the rectangular patch. In the design of proposed antenna, the normalized resistance of the trapezoidal radiating element is controlled by adjusting the gap with the microstrip line, so that a low-sidelobe level (SLL) can be achieved. Taking the 77-81 GHz frequency band allocated to automotive radar applications as an example, a 1 16 linear array is designed and fabricated. The measured SLL is better than -20 dB. The measured gain of 1 16 array is higher than 15 dBi over the operating frequency range of 77-81 GHz. The 1 16 linear array can achieve an impedance bandwidth of 7.6% (75.6-81.6 GHz).
BibTeX
@inproceedings{wang2022broadband,
  author = {Shuo Wang and Dan Zhang and Zhendong Ding and Huiwen Chen and Shenxiang Yang},
  title = {{Broadband Proximity Coupled Millimeter-wave Microstrip Array Antenna for Automotive Radar Applications}},
  booktitle = {Progress},
  year = {2022},
  doi = {10.2528/pierl22090605},
}
Figure