Blow Spinning of Polyimide/SiO2 Composite Fibrous Sponges with Excellent Adsorption Capacity and Recyclability

Lu Yu, Han Zhang, Fang Yu, Yibo Liu, Luna Jia, Weiran Zhao, Pan Li, Hao Wang, Pengfei Zhu, Bo LiACS 2022 · DOI

Abstract

Developing adsorption materials for organic solvents with both high adsorption capacity and recyclability provides a broad prospect for contaminated water treatment. In this study, PI/SiO2 composite nanofibrous sponges with hydrophobicity, high oil adsorption capacity, and excellent cycling performance fabricated by blow spinning have been reported. The improvement of hydrophobicity of PISi-3 was credited to the SiO2 nanoparticles, resulting in excellent oil adsorption capacity (103.95 g/g for ethanol, 320.99 g/g for motor oil, and 386.81 g/g for silicone oil). The recyclability after 10 cycles of PISi-3 was improved by 23% compared with the pure PI sponge owing to the supporting effect of SiO2 nanoparticles. Sponges with higher cycling performance could be obtained by regulating the temperatures of thermal treatment. PISi-3 after heat treatment at 450 °C exhibited good oil adsorption ability (98.12 g/g for ethanol, 261.92 g/g for motor oil, and 315.81 g/g for silicone oil) and excellent cycling performance. The adsorption capacity decreased by only 0.22% after 10 cycles. Therefore, the fabrication strategy of the sponges has great prospects in maritime oil spill recycling and industrial water treatment.
BibTeX
@inproceedings{yu2022blow,
  author = {Lu Yu and Han Zhang and Fang Yu and Yibo Liu and Luna Jia and Weiran Zhao and Pan Li and Hao Wang and Pengfei Zhu and Bo Li},
  title = {{Blow Spinning of Polyimide/SiO<sub>2</sub> Composite Fibrous Sponges with Excellent Adsorption Capacity and Recyclability}},
  booktitle = {ACS},
  year = {2022},
  doi = {10.1021/acsapm.2c01405},
}

Loading related content...

Figure