BiPathCPG: A Novel Load-Sharing Design Architecture for Compound Planetary Gearboxes

Deepak Kapa, Aman Singh, Saketh Vegesna, Suryank Joshi, Mayank Goswami, Shishir KolathayaarXiv 2026 · arXiv

TL;DR

The BiPathCPG is a novel gearbox architecture that boosts the performance of 3D-printed actuators for legged robots by adding "idle" gears to share the load. This design achieves a 70% increase in torsional stiffness and a 32% reduction in backlash while being lighter and more compact than traditional compound planetary gearboxes.

What Problem Does This Paper Address?

Legged robots require actuators that are strong, efficient, and "backdrivable"—meaning the motor can be easily turned by external forces, which is crucial for safe interaction and shock absorption. While metal gearboxes are standard, there is a growing interest in 3D-printed versions for rapid prototyping and cost-effective research.

However, 3D-printed planetary gearboxes face a "stiffness vs. size" trade-off. To handle high torques with relatively weak plastic materials, gears must be made very wide, leading to bulky, heavy actuators. Furthermore, these gearboxes often lack the torsional stiffness of cycloidal designs, leading to imprecise movement. The authors specifically target the Compound Planetary Gearbox (CPG), which offers high gear ratios but suffers from these width and stiffness limitations when 3D-printed.

Methods

The researchers introduce the BiPath Compound Planetary Gearbox (BiPathCPG). The core innovation is utilizing the "dead space" found in the center of a standard CPG's second stage.

In a conventional CPG, the second stage has a set of planets but no central sun gear. The BiPathCPG fills this void by adding:

  1. An idle second-stage sun gear: This gear isn't rigidly attached to the input; it simply floats on a bearing to synchronize the planets.
  2. Redundant second-stage planets: These extra gears create a second "path" for the torque to flow through.

By adding these components, the gearbox becomes kinematically redundant. This allows the load to be shared across more gear teeth simultaneously. To design this effectively, the authors extended an existing optimization framework called COMPAct to handle the new geometric and meshing constraints. They validated the design by 3D-printing a prototype in PLA and testing it against a baseline CPG on custom-built rigs.

Fig. 2: Gearbox architectures: (a)–(c) CPG and (d)–(f) BiPathCPG, shown as front view, line diagram and isometric view, respectively. S: sun, P1/P2: first-/second-stage planets, R: ring, C: carrier. iS2 and iP2 denote the idle second-stage sun and planet gears of the BiPathCPG.

Datasets

The authors used a dataset of various brushless DC (BLDC) motors to run an optimization sweep across gear ratios from 4:1 to 20:1. For physical evaluation, they benchmarked their prototype against a standard CPG designed for the same motor (MAD M6C12) and gear ratio (14:1).

Key Insights and Ideas

  • Redundancy as a Strength: Usually, engineers avoid kinematically indeterminate systems because they are hard to model. Here, the authors embrace it. By splitting the load between two paths, they can reduce the face width of individual gears, making the whole unit thinner.
  • The "Bracing" Effect: The idle sun gear doesn't just share load; it acts as an internal brace. In a standard CPG, planets can deflect radially inward under high load. The idle sun gear physically prevents this deflection, which is the primary reason for the massive jump in torsional stiffness.
  • Backlash Reduction: Increasing the number of simultaneously engaged gear meshes naturally reduces the "play" or backlash in the system, a common headache in 3D-printed transmissions.

Key Results

The BiPathCPG prototype showed significant improvements over the baseline CPG:

  • Stiffness: Torsional stiffness jumped from 822 to 1394 N·m/rad (a 1.70x improvement).
  • Backlash: Reduced by 32% (from 0.31° to 0.21°).
  • Form Factor: The actuator is 6.4 mm thinner and 25 g lighter.
  • Torque: It maintained a peak stall torque of 36.49 N·m, matching the baseline despite its reduced size.
Performance benchmarks showing the BiPathCPG's advantages in stiffness, backlash, and size.

Limitations and Future Work

The primary trade-off for these gains is efficiency. Because there are more gears meshing, there is more internal friction. The BiPathCPG had an efficiency of ~87.3% compared to the baseline's ~90.6%. It is also slightly harder to back-drive and more complex to assemble due to the additional idle gears.

In terms of durability, both 3D-printed designs eventually failed under extreme cyclic loading when the small first-stage sun gear stripped. The authors suggest that future versions using SLA resin or metal inserts for the sun gears could solve this. They also see potential in applying this "BiPath" load-sharing concept to other gearbox topologies, such as the Wolfrom gearbox.

Fig. 1: Actuators (3D-printed): Compound Planetary Gear- box (CPG) (left, 820 g) and BiPathCPG (right, 795 g).

Summary updated

Abstract

Quasi-Direct Drive (QDD) actuators are widely used in legged robots due to their low reflected inertia, high backdrivability, and high torque density, commonly employing planetary or cycloidal gearboxes. Single-stage planetary gearboxes offer high efficiency but limited torque density; multi-stage designs improve torque density at the cost of efficiency; and cycloidal gearboxes provide high stiffness but suffer from torque ripple. Compound Planetary Gearboxes (CPG) offer a compromise, but conventional designs result in increased actuator width, mass, and reduced torsional stiffness in 3D-printed actuators. This paper proposes the BiPath Compound Planetary Gearbox (BiPathCPG), a novel architecture that introduces an idle second-stage sun gear and load-sharing second-stage planets within the otherwise unused space of a conventional CPG to simultaneously improve stiffness, reduce actuator width, and reduce mass. An optimization framework computes BiPathCPG parameters for a given motor and target gear ratio. The architecture is validated through a 3D-printed proof-of-concept actuator design, benchmarked against a conventional CPG using custom-built test rigs. The BiPathCPG achieves a torsional stiffness of 1394 Nm/rad, a 1.70x improvement over the conventional CPG, with a 32% reduction in backlash, 25 g lower mass, and approximately 6.4 mm reduction in axial width, while achieving a peak stall torque of 36.49 Nm.
BibTeX
@misc{kapa2026bipathcpg,
  author = {Deepak Kapa and Aman Singh and Saketh Vegesna and Suryank Joshi and Mayank Goswami and Shishir Kolathaya},
  title = {{BiPathCPG: A Novel Load-Sharing Design Architecture for Compound Planetary Gearboxes}},
  year = {2026},
  eprint = {2611.24142},
  archivePrefix = {arXiv},
  url = {https://arxiv.org/abs/2611.24142},
}
Figure