Biomimetic Design and Optimization of a Rolling-Gear Knee Exoskeleton for High Kinematic Fidelity and Efficiency

Hui Li, Ming Li, Yujie Su, Disheng Xie, Raymond Kai‐Yu Tong, Hongliu YuMachines 2025 · DOI

TL;DR

This paper introduces a novel "rolling-gear" knee exoskeleton mechanism that accurately mimics the complex rolling-sliding motion of the human knee, a key challenge in current designs. By optimizing a unique gear train, they achieve high kinematic fidelity and efficient torque transmission, paving the way for more natural and effective rehabilitation devices.

What Problem Does This Paper Address?

Replicating the intricate biomechanics of the human knee in exoskeletons is crucial for effective rehabilitation and augmentation of mobility. The human knee joint doesn't simply hinge; it involves a coupled rolling and sliding motion between the femur and tibia. This complex interaction creates a constantly shifting instantaneous center of rotation (ICR) that traces a J-shaped path. Conventional exoskeleton designs often simplify this to a hinge, leading to geometric mismatches, discomfort, and abnormal torque peaks. Existing biomimetic approaches, like linkage or cam-based systems, often compromise on efficiency or torque output. Gear-based designs offer potential but can be hampered by intermediate transmission elements (belts/cables) that reduce efficiency and responsiveness. This paper aims to bridge this gap by developing a gear-based mechanism that achieves both accurate kinematic replication of the knee's rolling-sliding motion and high actuation efficiency.

Methods

The core innovation lies in a "rolling-gear" mechanism that cleverly translates the human knee's coupled rolling and sliding motion into distinct gear-driven movements.

  1. Biomechanical Mapping: The authors first model the human knee's rolling and sliding components using geometric parameters like rolling angle ($\alpha$) and sliding angle ($\beta$). This establishes a quantitative link between the biological motion and mechanical variables.
  2. Gear-Based Mechanism Design: A compound planetary differential transmission is employed. A planetary gear system captures the rolling motion ($\alpha$), while a three-stage external gear train handles the sliding motion ($\beta$). This design aims to create a near-linear relationship between these two components, approximating the physiological J-shaped ICR.
  3. Optimization: Gear parameters (specifically, tooth numbers of the sun, ring, and three external gears) are optimized. This optimization is guided by several constraints:
  4. Kinematic Fidelity: The exoskeleton's ICR trajectory must closely match the theoretical J-shaped curve (error < 10%).
  5. Torque Output: Sufficient peak torque for gait assistance.
  6. Compactness: Housing width < 60 mm.
  7. Manufacturability: Integer tooth numbers to avoid undercutting and ensure smooth meshing.
  8. Simulation Framework: A virtual human-exoskeleton coupling model is built in MATLAB/Simulink. This model allows for the simulation of misalignment displacement and angular deviation under various gear configurations, serving as a key metric for evaluating biomimetic performance.
  9. Experimental Validation: A benchtop prototype is fabricated and tested. This includes measuring joint torque, transmission efficiency, and evaluating human-machine kinematic compatibility using laser ranging sensors and interface pressure sensors.

Datasets

Not explicitly discussed in the paper as distinct datasets. The authors use typical adult knee morphology data (e.g., femoral and tibial condyle radii) and reference literature for biomechanical parameters. The experimental validation involves five healthy adult participants, whose biometric characteristics are summarized in Table 2.

Key Insights and Ideas

  • Decomposing Knee Motion: The key insight is effectively decomposing the complex coupled rolling-sliding motion of the knee into two distinct, manageable gear-driven components. This allows for a more precise mechanical replication.
  • Planetary + External Gear Synergy: The combination of a planetary gear set for rolling and a multi-stage external gear train for sliding proves to be an effective strategy for achieving the desired kinematic mapping and torque density.
  • ICR Trajectory as a Metric: Using the ICR trajectory deviation as the primary metric for evaluating biomimetic performance is a robust approach, directly linking mechanical design to physiological accuracy.
  • Sliding Displacement as a Proxy for Misalignment: The experimental validation highlights that minimizing sliding displacement at the shank cuff is a strong indicator of improved kinematic compatibility and reduced misalignment.
  • Efficiency Gains: The optimized gear design achieves remarkably high transmission efficiency (95.4% average), which is critical for wearable robotics to minimize energy loss.

Key Results

  • Reduced Misalignment: The optimized rolling-gear mechanism reduced sliding misalignment by 73.4% compared to a baseline single-axis hinge design at maximum flexion.
  • High Kinematic Fidelity: The ICR trajectory deviation was kept below 10% of the theoretical J-shaped path.
  • Peak Output Torque: The exoskeleton consistently delivered peak output torques in the range of 37–40 Nm, well within the design requirement for adult gait assistance.
  • High Transmission Efficiency: An average transmission efficiency of 95.4% was achieved across operating speeds, closely matching the theoretical prediction of 96.7%.
  • Compact Design: The housing width was successfully constrained to 57 mm.
  • Experimental Validation: The experimental results closely matched simulation predictions, confirming the mechanism's effectiveness in real-world conditions.

Limitations and Future Work

  • Rigidity and Noise: The rigid multi-stage gearing, while efficient, may contribute to structural stiffness and potential acoustic noise during operation.
  • Material Optimization: Future work will explore lightweight materials (e.g., composites, magnesium alloys) to further reduce mass and distal inertia.
  • Noise Damping: Gear profile modification and noise damping techniques will be investigated.
  • Dynamic Meshing Analysis: Further analysis is needed to quantify stiffness, damping, and backlash in the gear system.
  • Long-Term Durability: Studies on long-term durability and cyclic wear characteristics are planned.
  • Human-in-the-Loop Testing: Evaluating metabolic effects and user comfort during overground walking will be crucial for full exoskeleton integration.

Summary updated

Abstract

Biomimetic knee exoskeletons often struggle to balance accurate replication of joint biomechanics with efficient torque transmission. This study presents a knee exoskeleton featuring a single-stage planetary gear set with three coupled interface gears to reproduce the coupled rolling–sliding motion of the human knee. By mapping rolling and sliding displacements into distinct gear-driven motions, the design achieves a near-linear relationship approximating the physiological J-shaped instantaneous center of rotation (ICR). Gear parameters were optimized under biomechanical and engineering constraints, producing a compact, manufacturable configuration with ICR deviation ≤ 5 mm (sliding distance). Performance experience demonstrates that the optimized joint reduced sliding misalignment of the contact point by 73.4%, delivered peak output torque in agreement with predictions, and maintained an average efficiency of 95.4% across operating speeds. These findings confirm that the proposed mechanism enhances kinematic fidelity and actuation performance, offering a promising solution for next-generation rehabilitation exoskeletons.
BibTeX
@inproceedings{li2025biomimetic,
  author = {Hui Li and Ming Li and Yujie Su and Disheng Xie and Raymond Kai‐Yu Tong and Hongliu Yu},
  title = {{Biomimetic Design and Optimization of a Rolling-Gear Knee Exoskeleton for High Kinematic Fidelity and Efficiency}},
  booktitle = {Machines},
  year = {2025},
  doi = {10.3390/machines13110997},
}
Figure