Abstract
Biomechanical changes following meniscal tears and subsequent surgeries can accelerate the onset of osteoarthritis. This study utilizes finite element analysis (FEA) to investigate the biomechanical effects of horizontal medial meniscus tears and various resection strategies on a rabbit knee joint. Seven models were established: intact medial meniscus (IMM), horizontal tear (HTMM), superior leaf partial meniscectomy (SLPM), inferior leaf partial meniscectomy (ILPM), double-leaf partial meniscectomy (DLPM), subtotal meniscectomy (STM), and total meniscectomy (TTM). Results indicate that while a horizontal tear itself has minimal impact on joint stress at rest, the choice of surgical resection strategy significantly alters load distribution. Among the strategies, SLPM showed the minimal effect on joint stress, suggesting it is the preferred approach for preserving joint health.
Introduction
The meniscus is a critical shock absorber in the knee, responsible for distributing weight and protecting articular cartilage. Horizontal tears—where the tissue splits into superior and inferior layers—account for approximately 35% of meniscal injuries. If left untreated or managed with inappropriate surgical techniques, these tears can trigger a cycle of mechanical instability leading to osteoarthritis. This paper provides a systematic biomechanical comparison of different surgical "trimming" strategies to identify which approach best preserves joint function.
Methods
The researchers developed a high-fidelity 3D Finite Element (FE) model based on high-resolution MRI (0.1mm slices) of a healthy male New Zealand rabbit knee.
- The Models: Seven distinct scenarios were simulated: Intact (IMM), Horizontal Tear (HTMM), Superior Leaf removal (SLPM), Inferior Leaf removal (ILPM), Double-leaf removal (DLPM), Subtotal (STM), and Total Meniscectomy (TTM).
- Physics and Simulation: Cartilage and bone were modeled as linear elastic isotropic materials, while ligaments were treated as nonlinear hyperelastic (Neo-Hookean). An axial load of 40N was applied at a 45° flexion angle to simulate a resting state.
- Software: Reconstruction was performed in Mimics 21.0, with mechanical simulations executed in ABAQUS 2021.
Key Insights and Results
The Stability of Horizontal Tears
The study found that a horizontal tear (HTMM) only increased the axial load on the tibial cartilage by 1.6% compared to an intact knee. This is attributed to the preservation of "hoop stress"; as long as the tear does not reach the outer peripheral edge, the meniscus continues to distribute loads effectively.
Comparing Resection Strategies
When surgery is required, the specific tissue removed drastically changes the joint's mechanical environment:
- Superior Leaf (SLPM): This strategy had the minimal effect on joint stress, making it the most favorable surgical option.
- Inferior Leaf (ILPM): Removing the bottom leaf decreased the load-bearing capacity of the meniscus by 42.2%, indicating the inferior layer is more vital for the meniscus-tibial interface.
- Double-leaf (DLPM): Aggressive "cleaning up" of both layers increased the maximum von Mises stress on the remaining meniscus by 156.5%, potentially accelerating tissue failure.
- Subtotal (STM): This resulted in the meniscus bearing almost no load (97% decrease), shifting the entire burden to the underlying cartilage.
The Importance of Root Preservation
Preserving the posterior root and the peripheral rim is essential. Once these structures are compromised, as seen in subtotal or total meniscectomies, the meniscus loses its ability to resist radial displacement, leaving the cartilage vulnerable to damaging forces.
Discussion and Limitations
While this study provides valuable insights into surgical planning, it is limited by its focus on a static "resting state" at 45° flexion. Real-world activities involve dynamic loads that may reveal different stress patterns. Additionally, the use of linear elastic models for cartilage does not account for its poroelastic nature, where fluid movement affects long-term wear. Future research should incorporate dynamic gait cycles and explore kinetic loading to further validate these findings.
Conclusion
Horizontal meniscal tears that do not compromise the peripheral rim have minimal biomechanical impact on the rabbit knee joint at rest. However, if surgical intervention is necessary, Superior Leaf Partial Meniscectomy (SLPM) is recommended over other strategies to minimize joint stress. Surgeons should prioritize preserving the posterior root and the remaining peripheral edge to maintain the mechanical integrity of the joint.
Summary updated