Bioinspired origami-based soft prosthetic knees

Siyuan Gao, Chih‐Chao Yang, Hanxiang Chen, Xin‐Qiang He, Lecheng Ruan, Qining WangNature Communications 2024 · DOI

Abstract

Prosthetic knees represent a prevalent solution for above-knee amputation rehabilitation. However, satisfying the ambulation requirements of users while achieving their comfort needs in terms of lightweight, bionic, shock-absorbing, and user-centric, remains out of reach. Soft materials seem to provide alternative solutions as their properties are conducive to the comfort aspect. Unfortunately, the pronounced flexibility restricts the application of soft robots on prosthetic knees regarding morphological computation and weight-bearing performance. Here, we innovate a soft prosthetic knee for transfemoral amputees, addressing current challenges through the integration of origami technology and bioinspired weight-bearing principle, achieving its lightweight, compactness, low cost, and simple fabrication. The soft knee can hold the weight of a human (more than 75 kg), perform biomimetic polycentric flexion, absorb impacts during walking (absorbing 11.5% to 17.3% more impact forces), and actively support amputees to walk across ramps, stairs, and obstacles. The efficacy of the proposed design has been corroborated through bench-top and ambulation experiments. The proposal might lead to a paradigm shift in the lower limb prosthetic design.

Introduction

For individuals with above-knee (transfemoral) amputations, the metabolic cost of walking is significantly higher—often 80% more than for non-amputees. While modern microprocessor-controlled prosthetic knees have improved mobility, they remain predominantly heavy, rigid, and mechanically complex. Soft robotics presents a compelling alternative, offering inherent compliance and lightweight properties that could drastically improve user comfort. However, soft materials have historically struggled with weight-bearing capacity and the ability to perform "morphological computation"—the ability to execute complex movements, such as the shifting instantaneous center of rotation (ICR) of a biological knee, without heavy rigid linkages.

Design and Methodology

The proposed soft prosthetic knee overcomes these challenges through a combination of origami kinematics and bioinspired structural mechanics.

Structural overview and origami-based fabrication of the soft prosthetic knee.

Origami Kinematics

The device utilizes a specific 2D crease pattern that, when folded into a 3D structure, mimics the polycentric path of a biological knee. This allows the prosthetic to achieve natural flexion without the need for complex metal linkages. The structure is fabricated using Thermoplastic Polyurethane (TPU) via Selective Laser Sintering (SLS), with rigid nylon facets bonded to the exterior for structural integrity.

Horsetail-Inspired Stability

Taking inspiration from the horsetail plant (Equisetum), the design employs "turgor pressure" and morphological concavity. Just as plants use internal fluid pressure to maintain rigidity, the prosthetic utilizes a pneumatic chamber. Under axial load, the structure deforms into a concave shape, which increases its stability against buckling, allowing it to support significant weight.

Control Architecture

A hierarchical control system manages the device through three layers: a high-level controller for detecting walking modes (e.g., level ground vs. stairs), a mid-level controller for regulating pneumatic pressure, and a low-level controller for closed-loop pressure execution.

Experimental Validation

The design was validated through both benchtop testing and clinical trials with three transfemoral amputees. Benchtop results confirmed the accuracy of the ICR trajectory and the device's load-bearing capacity. Clinical trials on treadmills (up to 1.25 m/s) and multi-terrain environments (ramps, stairs) demonstrated that the knee provides gait symmetry comparable to traditional rigid prosthetics while reducing the effort required for hip flexion, as evidenced by electromyography (EMG) data.

Discussion: Softness as a Strength

A key insight of this research is the revaluation of material deformation. In traditional engineering, deformation is often a failure mode; here, it is a functional feature.

Bioinspired load-bearing mechanism: comparing horsetail plant cross-sections with the prosthetic's concave deformation under load.

The "squeezing" action of the origami folds under weight stabilizes the structure, emulating the parenchymatous tissue in plants. Furthermore, the elastomeric nature of the knee allows for "impact decoupling." The soft knee was found to absorb 11.5% to 17.3% more impact force than rigid alternatives, significantly reducing stress on the user's residual limb.

Conclusion

The resulting prosthetic knee weighs only 300g and costs less than $200 to manufacture, yet it can support over 75kg—roughly 250 times its own weight. While future work is needed to increase walking speeds beyond 1.25 m/s and characterize long-term fatigue life, this bioinspired origami approach represents a significant step toward lightweight, affordable, and comfortable lower-limb prosthetics.

Summary updated

Abstract

Prosthetic knees represent a prevalent solution for above-knee amputation rehabilitation. However, satisfying the ambulation requirements of users while achieving their comfort needs in terms of lightweight, bionic, shock-absorbing, and user-centric, remains out of reach. Soft materials seem to provide alternative solutions as their properties are conducive to the comfort aspect. Unfortunately, the pronounced flexibility restricts the application of soft robots on prosthetic knees regarding morphological computation and weight-bearing performance. Here, we innovate a soft prosthetic knee for transfemoral amputees, addressing current challenges through the integration of origami technology and bioinspired weight-bearing principle, achieving its lightweight, compactness, low cost, and simple fabrication. The soft knee can hold the weight of a human (more than 75 kg), perform biomimetic polycentric flexion, absorb impacts during walking (absorbing 11.5% to 17.3% more impact forces), and actively support amputees to walk across ramps, stairs, and obstacles. The efficacy of the proposed design has been corroborated through bench-top and ambulation experiments. The proposal might lead to a paradigm shift in the lower limb prosthetic design.
BibTeX
@inproceedings{gao2024bioinspired,
  author = {Siyuan Gao and Chih‐Chao Yang and Hanxiang Chen and Xin‐Qiang He and Lecheng Ruan and Qining Wang},
  title = {{Bioinspired origami-based soft prosthetic knees}},
  booktitle = {Nature Communications},
  year = {2024},
  doi = {10.1038/s41467-024-55201-1},
}
Figure