Bioelectricity-generating behavior of a chemically modified carbon black anode in microbial fuel cells

Xinhong Peng, Xizhang Chu, Wei Liu, Shenghui Wang, Yi Zou, Xiaonan WangCHINESE 2015 · DOI

TL;DR

This paper tackles the issue of unstable power output in microbial fuel cells (MFCs) by chemically modifying carbon black (CB) anodes. By treating CB with HNO3 and KOH, and adding Fe3O4 nanoparticles, the researchers significantly enhanced the anode's capacitance, leading to a steady and improved power generation, paving the way for more reliable MFC applications.

What Problem Does This Paper Address?

Microbial fuel cells (MFCs) hold great promise as a renewable energy technology, directly converting organic waste into electricity using exoelectrogenic bacteria. However, a major hurdle to their widespread adoption is the unstable power output, often characterized by "current overshoot" and "undershoot." This instability is largely attributed to the limitations of the anode material, specifically its low electrochemical capacitance and the immaturity of the bacterial biofilm. While some materials like ultra-capacitor activated carbon (UAC) have shown promise in stabilizing power, their high cost and complex manufacturing processes limit practical application. Carbon black (CB) is an attractive alternative due to its excellent conductivity, chemical stability, and low cost, but its inherent low capacitance leads to the very power instability issues that need to be overcome.

Methods

The researchers employed a multi-pronged approach to modify and characterize their carbon black anodes:

  • Chemical Activation: Carbon black (CB) was treated with either concentrated nitric acid (HNO3) or potassium hydroxide (KOH) at low temperatures. This process aimed to introduce oxygen- and nitrogen-containing functional groups onto the CB surface.
  • Fe3O4 Nanoparticle Addition: After chemical activation, Fe3O4 nanoparticles were added to the modified CB matrix at a 5 wt.% loading. This was intended to leverage the pseudocapacitive properties of Fe3O4.
  • Anode Fabrication: The modified CB materials were then roll-pressed onto a current collector with a polytetrafluoroethylene (PTFE) binder to create the anode electrodes.
  • MFC Assembly and Operation: Single-chamber, membrane-less MFCs were constructed using these anodes and a standard Pt/C cathode. The MFCs were operated in batch mode with a defined anode medium and inoculated with bacteria from a pre-acclimated MFC.
  • Characterization Techniques:
    • FTIR Spectroscopy: Used to identify the functional groups present on the CB surface before and after chemical modification.
  • EDX Spectroscopy: Employed for elemental analysis of the anode materials.
  • BET and BJH Analysis: To determine the specific surface area, pore volume, and pore size distribution of the CB samples.
  • Contact Angle Measurement: To assess the surface wettability of the anodes.
  • Cyclic Voltammetry (CV): To measure the electrochemical capacitance of the anodes, both in abiotic (without bacteria) and biotic (with bacteria) conditions.
  • Polarization and Power Density Curves: To evaluate the power generation performance of the MFCs under varying external resistances.
  • SEM Imaging: To visualize the morphology of the anodes and the adherence of the exoelectrogenic bacteria.

Datasets

Not discussed in the paper. The study utilizes self-prepared anode materials and operates microbial fuel cells, rather than relying on pre-existing datasets for training or evaluation.

Key Insights and Ideas

  • Capacitance is Key to Stability: The study strongly suggests a direct correlation between anode capacitance and the elimination of power overshoot in MFCs. Higher capacitance appears to buffer the system against rapid voltage fluctuations.
  • Chemical Activation Enhances Capacitance: Treating CB with HNO3 and KOH significantly increased its electrochemical capacitance, particularly the HNO3 treatment (CBN), which showed the highest abiotic capacitance. This is attributed to the introduction of oxygen-containing functional groups and potentially changes in pore structure.
  • Fe3O4 Boosts Power Output: The addition of Fe3O4 nanoparticles, even to the chemically activated anodes, further improved the maximum power density (MPD) of the MFCs. This highlights the contribution of Fe3O4's pseudocapacitive properties.
  • Hydrophilicity Matters for Biofilm: Chemical activation, especially with HNO3, increased the hydrophilicity of the CB surface. This improved wettability is crucial for better ion adsorption and, importantly, for enhanced bacterial adhesion and biofilm formation on the anode.
  • A Threshold for Stability: The research indicates that a certain level of anodic capacitance, specifically above 1.1 F/cm², is necessary to achieve a steady power output and eliminate MFC overshoot.

Key Results

  • Improved Power Density: The Fe3O4-added MFCs (CBFe, CBNFe, CBKFe) consistently showed higher maximum power densities (MPDs) compared to their Fe3O4-unadded counterparts. CBKFe achieved the highest MPD of 891 ± 31 mW/m².
  • Overshoot Elimination: While the untreated CB anode exhibited current overshoot, the chemically activated anodes (CBN, CBK) and their Fe3O4-modified versions (CBNFe, CBKFe) showed no overshoot in the initial cycles. In later cycles, even the CB and CBFe anodes, with improved capacitance, achieved stable power output.
  • Enhanced Capacitance: The acid-pretreated CB (CBN) exhibited the highest abiotic capacitance (1.52 F/cm²), a significant increase compared to the untreated CB (0.71 F/cm²). Biotic capacitance also increased substantially after bacterial colonization, with CBNFe reaching 1.84 F/cm².
  • Surface Modification: FTIR and EDX confirmed the introduction of oxygen (and nitrogen for HNO3 treatment) functional groups on the activated CB surfaces. Contact angle measurements showed increased hydrophilicity for the activated anodes.

Limitations and Future Work

  • Specific Surface Area Reduction: Chemical activation led to a decrease in the specific surface area (SBET) of the carbon black. The authors acknowledge that while microporosity increased, the reduction in overall surface area might play a role in the performance and warrants further investigation.
  • Biofilm Morphology: While SEM images showed bacterial adherence, there was no significant difference in the morphology or amount of bacterial cells observed between the different anode types. The authors suggest that the improved anodic capacitance, rather than a dramatic change in biofilm structure, is the primary driver for stability.
  • Future Work: The paper implies that further optimization of the chemical activation and Fe3O4 loading could lead to even better performance. The study also highlights the importance of achieving a minimum anodic capacitance for stable MFC operation, suggesting that future research should focus on materials and methods that can reliably achieve and maintain this threshold.

Summary updated

BibTeX
@inproceedings{peng2015bioelectricity,
  author = {Xinhong Peng and Xizhang Chu and Wei Liu and Shenghui Wang and Yi Zou and Xiaonan Wang},
  title = {{Bioelectricity-generating behavior of a chemically modified carbon black anode in microbial fuel cells}},
  booktitle = {CHINESE},
  year = {2015},
  doi = {10.1016/s1872-2067(15)60880-4},
}
Figure