Abstract
Orthopedic fiberglass casts are essential for fracture management but often cause significant thermal discomfort and skin irritation by trapping body heat. This study introduces a sustainable, bilayer coating that enables passive daytime radiative cooling (PDRC) on flexible fiberglass substrates. By utilizing calcium pyrophosphate (CPP) derived from animal bone waste, the researchers developed a coating that achieves over 90% solar reflectance and a temperature reduction of up to 15 °C compared to ambient conditions, providing a biocompatible and energy-efficient solution for clinical use.
Introduction
Passive daytime radiative cooling (PDRC) is a "zero-energy" cooling technology that reflects solar radiation while emitting thermal energy into the cold vacuum of outer space through the Earth's atmospheric transparency window (8–13 μm). While PDRC materials have advanced significantly for rigid, flat surfaces, applying them to flexible and irregular wearable substrates—such as orthopedic casts—remains a challenge. Standard fiberglass casts are notorious for causing sweating and dermatitis due to heat retention. This research addresses the need for a PDRC system that is optically efficient, mechanically robust, and biocompatible for medical applications.
Materials and Methods
The researchers developed a multifunctional bilayer coating integrated onto a commercial, rapid-curing fiberglass cast matrix. The system consists of:
- The Substrate: A woven fiberglass matrix pre-impregnated with a quick-curing hydrated ester resin.
- The Bilayer Coating:
- Adhesion Layer: A mixture of polyvinyl alcohol (PVA) and calcium pyrophosphate (CPP) particles designed to bond to the irregular woven surface.
- Protective Layer: A mixture of polymethyl methacrylate (PMMA) and CPP, providing hydrophobicity and environmental durability.
- The Radiative Pigment: Calcium Pyrophosphate (CPP) was synthesized from thermally treated animal bone waste, serving as a sustainable and biocompatible alternative to traditional pigments like Titanium Dioxide ($TiO_2$).
Performance was evaluated using UV-vis-NIR and mid-infrared (MIR) spectroscopy, thermal imaging, and 62-hour outdoor field tests in Boston, MA. The CPP-coated casts were benchmarked against common inorganic fillers such as $ZnO$ and $ZrO_2$.
Key Results and Discussion
The optimized coating, containing 30 wt% CPP, demonstrated exceptional optical properties, achieving a solar reflectance exceeding 90%. This high reflectance is attributed to Mie scattering from sub-micron CPP particles, while the phosphate groups in the CPP facilitate high thermal emittance in the MIR window through phonon-polariton resonances.
In outdoor testing, the coated cast maintained a temperature 15 °C below ambient in shielded environments and approximately 6 °C below ambient in unshielded, real-world conditions. Beyond thermal performance, the coating improved the mechanical properties of the cast; tensile testing indicated increased strain tolerance, which enhances patient comfort by making the cast slightly more ductile without compromising structural integrity. The bilayer approach also ensured durability, with the PMMA layer providing a water-resistant barrier (contact angle ~85°) and maintaining performance after 50 cycles of mechanical abrasion.
Conclusion
This study successfully demonstrates a circular economy approach to medical materials by repurposing bone waste into a high-performance cooling pigment. The resulting PDRC fiberglass cast offers a significant improvement in thermal management for orthopedic patients. Future work will focus on addressing dust accumulation to maintain long-term reflectance and conducting clinical trials to quantify the reduction in skin-related complications in medical settings.
Reference: Zhang, X., et al. (2025). Biocompatible passive radiative cooling rapid-curing fiberglass casts. Journal of Materials Chemistry A, 13, 36632–36641.
Summary updated