BerryTwist: A Twisting-Tube Soft Robotic Gripper for Blackberry Harvesting

Johannes F. Elfferich, Ebrahim Shahabi, Cosimo Della Santina, Dimitra DodouIEEE RA-L 2025 · DOI

TL;DR

This paper introduces "Berry Twist," a novel soft robotic gripper designed for the delicate task of blackberry harvesting. By employing a unique twisting-tube mechanism, the gripper gently envelops and detaches berries, significantly reducing damage and addressing a key challenge in automated agriculture.

What Problem Does This Paper Address?

The agricultural industry faces a growing labor shortage, making automation in harvesting increasingly critical. However, harvesting delicate fruits like blackberries presents a significant challenge. These berries are prone to damage, such as Red Drupelet Reversion (RDR), which is exacerbated by mechanical handling. Existing rigid grippers often apply uneven pressure, leading to bruising and deformation, and require precise alignment, making them unsuitable for the complex and dynamic environment of a fruit canopy. This paper aims to develop a soft robotic gripper that can selectively harvest blackberries with minimal damage, addressing the need for gentle handling and adaptability.

Methods

The core innovation is the "Berry Twist" gripper, which utilizes a fabric tube mechanism actuated by two synchronized servo motors. These motors twist the ends of the tube in opposite directions, causing it to contract and gently envelop the blackberry. This twisting action, combined with a slight pulling force, is designed to detach the berry from its pedicel.

The researchers explored various tube materials to optimize performance, including different types of cheesecloth and spandex, as well as combinations and padded variants. These materials were chosen for their food-safe properties, elasticity, and compressibility. The gripper's design incorporates a pre-tensioned spring to maintain tautness and a custom hose clamp for stability.

To evaluate the gripper's performance, a custom experimental setup was developed. This setup allowed for precise measurement of detachment forces, release rates, and damage indicators like leaking drupelets. The testing involved a controlled environment where blackberries were harvested and then subjected to the gripper's action.

Datasets

Not discussed in the paper. The study utilized harvested blackberries from a local greenhouse for testing.

Key Insights and Ideas

  • Twisting for Gentleness: The fundamental insight is that a twisting motion, rather than just squeezing, can provide a more uniform and gentle grip on delicate fruits, minimizing localized pressure points.
  • Material Matters: The choice of tube material significantly impacts the gripper's success. Thicker, more compliant materials like thick cheesecloth and spandex, and their combinations, proved more effective than thin or less elastic options.
  • Blind Grasping Potential: The gripper demonstrates promising performance even with a "predominantly blind grasping strategy," meaning it doesn't require precise visual alignment of the berry, which is a significant advantage in cluttered agricultural environments.
  • Integrated Detachment: The twisting action itself is often sufficient for detachment, reducing the need for additional complex maneuvers or external forces.

Key Results

The Berry Twist gripper achieved an impressive 82% success rate in detaching blackberries and a 95% success rate in releasing them.

  • Material Performance: Thick cheesecloth and spandex tubes, along with a combination of thick cheesecloth inside and spandex outside, showed the highest success rates, exceeding 75% for detachment.
  • Damage Reduction: The study reported minimal damage, with no purple stains or leakage observed during the harvesting process.
  • Detachment Mechanism: In most successful cases, the twisting and inherent pulling force of the gripper were sufficient for detachment, with the vertical pull of the testing setup only being necessary in some instances.

Limitations and Future Work

The authors acknowledge that the current design relies on a "predominantly blind grasping strategy." Future work will focus on developing more intelligent harvesting strategies by integrating sensor technology. This includes incorporating deformation sensors into the fabric and adding a camera to the lower part of the tube. These advancements aim to further enhance the gripper's performance and unlock its full potential for efficient and reliable harvesting of small and delicate crops. The study also notes that certain failure modes, like the pedicel slipping from the tape used in the experiment, were excluded from the analysis, which could be a limitation in real-world scenarios.

Summary updated

BibTeX
@article{elfferich2025berrytwist,
  author = {Johannes F. Elfferich and Ebrahim Shahabi and Cosimo Della Santina and Dimitra Dodou},
  title = {{BerryTwist: A Twisting-Tube Soft Robotic Gripper for Blackberry Harvesting}},
  journal = {IEEE RA-L},
  year = {2025},
  doi = {10.1109/lra.2024.3505813},
}
Figure